GAMDIAS ATX Mid Tower Gaming PC RGB Case w/Tempered Glass and Excellent Airflow Design & 4 x 120mm ARGB Fans, Support Top & Front 360mm AIO and Vertical GPU Mount

Extremely simple layout, with a few different cable routing options for front panel as well as SATA/PCIe. Took all of 30 minutes to install a complete system from scratch, which is about 1/3 of the time it usually takes me with these "cheap" cases. The included fans are powered by SATA, so no PWM on the gigantic front fans.Build quality is FANTASTIC. Toolless design for the glass side panel is a very nice touch, as well as an *actual* 2.5" SSD bay sitting right behind the motherboard for very easy cable management.I will definitely be buying this case again for any of my friends wanting a good, cheap case. The only other cases I've found with this level of quality are Fractal Design's $200+ offerings.Only "downside" is lack of USB-C on the front panel. A single USB 3.1 and two USB 2.0 is barely cutting it for front I/O these days; 9/10 simply because of that.

Excelente case por el precio, me llego a Colombia sin ningún tipo de detalle, recomendaría una fuente de poder full modular para no tener problemas, aunque alguien experto en manejo de cableado no tendrá problemas con una fuente de poder no modular, tiene bastante espacio internamente y buen flujo de aire.

Good value for the money. I assumed 200mm fans would be quieter, but they are ghastly loud. Those saying they are quiet, have never had a quiet PC. My main rig is a 13900K/4090 in a Define R7 with Arctic 420 AOI, arctic 140mm fans, and at idle you can't tell that it's even on. Well, I can't have the second computer being obnoxious, so I found that the first wire from the SATA power tap they use is the 12v. I cut that and used the 12v from a fan header and can actually control the fan speeds. Now it's a pretty quiet but there is still some slight noise from the fan sleeve bearing.If they put a rheostat or some sort of fan control, I would give this an over the moon 5 stars, but using a SATA power tap and not separate fan and LED power is a huge missed mark for very little added cost to them.

I ordered this case for my new pc build. The product is amazing!!! Only small issue I had was figuring out why the fans were all connected to the same data cable but I figured it out and it works wonderfully

Muy elegante y sencillo y amplio, buen material de protección y estructura, todos las conexiones funcionaron a la perfección es muy buen producto, muy visual y llamativo una vez que se le incluyen los componentes interiores.

Case comes factory ready for a Micro ATX board, make sure you add the 3 extra stand-off screws that are in the packaging if you are using a ATX board. It comes with many extra screws as well. Read the indentations on the inside of the metal case. This case makes my Deepcool Matrexx 50 case(seen in the background)look way bigger. With a little DIY effort It "might" fit a 40 series card but it would definitely be pressing right up against the front fan shroud. This case isn't really a "mid sized" case, it's in between a small and mid size case I'd say. Great case if you have a small area!

This is a stellar product, well worth the price

me encanto, barato, buen diseño, los cables de los fant venían conectados solo era conectar los sata, los cables usb vienen forrados para facilidad de conexión, muy muy buen producto, me encanto.

I assembled my new PC using this case it's quite spacious and the LED fans are very bright and colourful and are easily controlled by the argb ports on the motherboard. The speed of the 2 fans in the front cannot be controlled by the motherboard (they are always on at whatever speed), but the speed of the rear case fan can be controlled via the motherboard. Fairly easy to cable manage in the case. The HDD cage cannot be removed in the bottom of the case. After I assembled my PC I peeled the plastic film off the glass panel on the front and noticed a small bubble in the glass from when the piece was made and small chip in the corner of the glass. After I assembled I didnt want to disassemble to return the case, so I decided to live with it, so check everything out on the case before you begin.**UPDATE**I reached out to the company about the chip on the bezel and they shipped me a new one within the week. GAMDIAS does stand behind their product. A quick tip do not use their site for reporting warranty issues go to their discord channel. They monitor that more frequently and are more responsive. I'm raising their rating to 4 because of the support I received. I can't give them a 5 because if the initial issue, but they did fix the problem in short order.

En excellent produit si vous désirez un boitier ARGB bien ventilé et pas prise de tête pour la partie LED.La porte amovible aimantée est très pratique.Excellent rapport qualité prix.

Excellent case easy to open and access all components. The glass door that opens via hinges is great. I was able to put my GTX 3070 card of 30cm without problem but be careful it is the max limit. I also put a double ventilation Air Cooling that installs and integrates easily. I changed the front fans because I wanted to connect them to my motherboard because the original connectors are not compatible with the motherboard connectors. But this is just a personal choice because the original fans are good quality and quiet.

The case’s tempered glass door can easily fall off due to the hinges not being plugged on top.

Wollte eine Wasserkühlung einbauen mit zweimal 140er Lüfter. Zur Montage oben am Deckel des Gehäuse ist das Gehäuse zu kurz. Dachte ich, kann man dann ja vorne montieren. Da ist aber entgegen dem Bild beim Kauf ein Deckel. Kühlung wahrscheinlich nicht gut. Ich fühle mich betrogen