WINSOON 12FT Barn Door Hardware Kit for Single Sliding Door Track, Antique J Shape Black Hanger, 4-18FT for Choose (12FT Single Door Kit)

I think this is a great product and value, however the 7.5' track I ordered is stated to be a 1 piece track. I returned the first shipment because the box it arrived in was only 4.5' long, obviously not a 1 piece track. I called Amazon to return and re-order a 1 piece track and they assured me the re-order would arrive as a 1 piece track. The re-order came in a 4.5' box, again not a 1 piece track.If you don't mind a 2 piece track, which I have in a different 14' track, I would highly recommend it.** UPDATE **Winsoon contacted me after writing my review and they offered to make me a custom 1 piece 7.5' track (apparently it was never supposed to be advertised as a 1 piece track). I said yes and they shipped me the 1 piece track in 2 days at no charge. Excellent service on what I already think is a great product!

The instructions were pretty good, but one thing that puzzled us was the step where the round things were installed on the front/top of the doors. It keeps the door from jumping off the track. I don’t think it mattered how far from the door hangers we put them. We put them about an inch inside the hangers on both sides. We have trim, so we had to build out the “header” so that it was flush with our existing trim so that the door wouldn’t hit on the bolts on the wall side of the door. Our door is 1 3/4” thick. For the doors to close all the way, we had to put the door hanger/roller on the inside of the door trim. The thing you have to strongly consider is the depth off the wall if you have trim and that the hangers are placed such that the doors closes all the way. We didn’t use the floor guide hardware that came with the kit because we don’t have a router. I’m glad we didn’t because it took so long for us to paint the door trim that the doors warped a little. We bought some that screw into the wall and you can adjust the base with different rollers. Make sure your wall is super flush and straight and I guess shim if necessary. Our wall bowed slightly on the right side and the rail is so rigid (for obvious reasons) that it scrapes a little on the right when we close the door. I think I will put an extra washer or two behind that one screw on the rail to straighten it out. We followed the directions precisely, and the height they said in the instructions worked out perfectly. It left about a half inch gap at the bottom of the door for air return when closed. The rail connector didn’t hold it level, and wasn’t as sturdy as I would have liked, so we didn’t connect them until we had one side hung completely. We took our time and it took about 4 hours from start to finish.

Great product really well built and sturdy

These have real weight.....both literally and figuratively. Handsome wrought iron.

This Barn Door rail as shown in my picture installed with very few issues. The Rail and parts are of very high quality. Installation Instructions were well written.Issue # 1 - Box was slightly damaged when received, but there were no damaged parts. The only issue was I was missing one bolt, washer, nut for the plate that joins my 2 - 6 ft. pieces. Call to the vendor - I had replacement parts in 2 days. Issue # 2 - I did not want to use a support board behind the rail, because I had put extra studding support behind the wall specifically for a future Barn Door Rail. Call to the vendor - they sent me a complete set of longer spacers, also received within a few days at NO charge. I changed my mind afterword and decided to put a support board in place anyway to give the rail more support - highly recommended.Issue # 3 - I could not figure out the best method for installing the Floor Guides without having to temporarily removing a bolt. Question into Vendor - I received an answer within 24 hours which provided the best procedure to follow - eliminating the need to remove any bolts.Bottom Line, Product Support is equally as important as Product Quality. I am giving the Product / Vendor a 5 Rating because both criteria was met very successfully.

We did the 11 foot track because our room is 13 ft wide and we didn't want the track to go too far with double 32-in doors. My husband has been in construction for over 20 years and did it himself but it took about 2-3 hours. However, he is a perfection, used a laser level and maid sure this is flawless. He said he could do it quicker now knowing a few things. Directions are easy but you will need a drill. He was also able to use the one set of stoppers and made a stop in the center so the doors have limited movement and stay on their side. We have three boys under the age of 10 and our big concern was them swinging the doors back and forth on the track. Since it is two tracks of 5 1/2 ft he was able to create the bumpers in the center and on the ends. See the pictures. But this track was a great value my only complaint is they did not send some washers and we were short on those but once again we made it work.

Everything was included. Well made and glide was ssmooth. Easy to install.

The media could not be loaded.  Works best with studs 16" apart. Very happy with this, looks great! Just Very important to have it level so the door stays closed.

Definitely need help when you install but they look great!Hubby cut a notch in bottom of door to control the sway. That piece is included and doesn’t require a notch to work he is just anal and wanted to do that.We have just ordered handles to complete the look. Well worth it. We found $50 doors, painted them a bold burnt orange and then added the hardware.Love it

Easy to fit, looks great and what I had envisioned with black doors.

Excellent quality hardware kit. Installation instructions are pretty decent for anyone that is a little bit handy. The single 1 piece track makes this very stable and easy to install.The only complaint I have, is the bolts used to mount the hangers to the door, are too long for a 1 3/8” door, which the specifications say the kit will work for. Yes, it does, but, you will have to cut the length of the bolts shorter for this to work. Cutting bolts and preserving the threads may be tricky for some people without the proper tools. Fortunately, I have everything I needed.They could supply some shorter bolts, or maybe some spacers for the back side, which might make it work without cutting the bolts. however, a person would have to check for interference on any trim around the door opening. Perhaps the spacer could go on the front side without looking horrible as well.*note, the door handle in this picture, is not included in the kit, this was a separate purchase.

Very Dissatisfied with NO REPONSE to my two email requests asking for a longer rail. The rail they say fits for the door size is too small in that it doesn't allow the door to fully open. I sent 2 email requests asking for another rail of a foot bigger, and that I could send back the existing rail for the exchange and the Seller has not bothered address the issue. It appears that the rail can have a larger piece added or perhaps a piece of rail was not supplied because of the size. No matter: it's just too short for the advertised door size. Jeeze, I'd even buy the larger rail. As for the product itself, it is of excellent quality. Just don't expect any customer service. Oh, and the screws as mentioned previously needed extra washers to allow to tighten.

My handyman installed the washing machine and dryer inside the built-in wardrobe and this sliding door was my only option. Looks fantastic and works flawlessly. It wasn't easy to install, likely I had a perfect man for this job.