Cozylkx 90"x 3" Self Adhesive Flexible Molding Trim, 3D Sticky Decorative Wall Lines Wallpaper Border for Home, Office, Hotel DIY Decoration, Black

The item is all crumpled and sent as a roll. The design is all bent and do not get the finish as seen in the pic. Adhesive and protection tape on the inner side was already peeled and not worth buying at such a cost.

Good product bit costly though.

Could be easier to bend but nice looking if applied carefully. I used a razor blade to make tiny cuts in back to make bending easier. added industrial spray glue. Then painted twice with a really good quality semi gloss paint. Definitely not wood, but you could fool Martha Stewart if done correctly!

This definitely made my mirror look a little better but it's got flaws. It keeps coming unstuck in the corners so I'm going to have to add some kind of glue. Where the seams made up it's very hard to get them perfect because it sticks right away and I had some gaps where you could see mirror between it. I put some black paint in some Elmer's glue and kind of filled it in and it seemed to work okay. If you have a second person to help you and highly recommend it. I did it alone but struggled.

Somehow it both rips up drywall and leaves a sticky foam residue behind. It also looks wrinkly and very cheap. Only purchase for your worst enemies. I've just got it and it's already in the trash.

I needed a lot of rolls of this to do a border around my room. So many of them come in absolutely terrible shape. Look at this roll for example.

I rent so I needed something removable. I love these! I have used it in my laundry room, my girls’ bedroom, and in my Livingroom.Pros1. Easy to cut2. Easy to install3. Easy to work with. It can go around round or square edge. It can also be pulled back and replaced on the wall if needed.4. Many colors to match whatever project you are doing.Cons1. Can tell it is foam and see creases when you first unroll it: Fix: Needs to be rolled out and forced to flatten before installing. Wait a day or two after receiving so it will fully puff up so lines aren’t noticeable. Also if you install before letting it rise up it may condense and the length will be different.2. You can see the seems and the foam on the back/side doesn’t match. Fix: It helps to put painter’s tape behind and paint it a color that matches or is close to the color of the edging and paint the edge itself.3. If you touch the back the adhesive can come off or become dull easily. Also, if the adhesive side touches any part of the border it doesn’t pull apart without messing up that part of the border. If you press to hard when first applying it can make it not sticky as well. Areas where there is mor chances for condensation such as by the door increases chance that the adhesive will wear off. Fix: Pull the backing off as applying the border. Don’t press firmly at first to make sure it is where it needs to be without adjustments and then when it is how you want it run your hand across it firmly to keep it in place. At parts where you think the adhesive isn’t as good or may end up coming off you can get a spray adhesive from Walmart for $5 and it can be washed off for renters and it keeps it on there nice and secure.I suggest scissors for any cutting needed. Do as much cutting prior to and leave the backing on. If you ave to cut some while it is applied either pull it back a little and cut with scissors (best way) or if it is stuck and that isn’t an option then press down on the top and bottom almost like you are stretching it and cut with a sharp exacto knife or box cutter.Overall, I love this product and would recommend it! It is an easy budget and renter friendly way to spruce up your home!