PVC Trim Adhesive and Sealant White

I needed to attach 1.75”x80” PVC trim strips vertically to several sets of wood French windows to create a weather-resistant overlap, and discovered this product when watching a YouTube video about how to attach PVC to wood. I sanded the target areas down to the wood since I didn’t want to risk the adhesive not sticking to the (who knows how old) paint, and the product worked flawlessly.Since I didn’t know how thick the product would be, I bought myself a slick new caulk gun with an adjustable thrust ratio, but that turned out to be overkill. This product was no harder to apply than typical latex sealant. It went on evenly and smoothly. I did end up using the higher thrust ratio, but that was because I wanted to have better control over how much sealant I was applying. (Okay, I admit it, I also wanted to justify my new caulk gun since it is super-cool and I wanted to keep it.)The working time of the adhesive was fantastic. Lining up 80” pieces of trim with only two hands can be a challenge; this product provided enough immediate grip to hold the long PVC strip in place, but gave me plenty of working time to slide each piece of trim back and forth a tiny bit to make sure the adhesive was spread across the back side of the PVC and also to make small adjustments to get the alignment as close to perfect as possible. I then secured each piece with spring clamps and left them to set for about an hour. The result was a really strong bond. Although it was probably unnecessary, I also ran a small bead of sealant up the edge as added protection against water penetration.If you’ve never used this type of adhesive, don’t be as intimidated as I was. It turned out to be pretty darn easy and the results were excellent.5 stars.

This product is excellent adhesive and sealant for Azak composite trim as well as an excellent product for vinyl clad exterior windows and door when the vinyl clad is coming off the door or wood substrate. Adhesion is excellent and it also seals.

Matches PVC molding without having to paint. What else could you ask for

Used this to install window stops and window drip trim for retrofit window installation. Set up fast and didn't slide around. Still caulked the windows out of habit. Easy to use and cleaned up without sticking.

Product works great but directions leave much to be desired. They state to remove the nozzle and cut the tip when it should say UNSCREW THE NOZZLE by twisting it off, then cut the tip. Once I figured this out, it worked great and flowed easily. My application was adhering PVC to wood and it worked perfectly.

Fantastic sealant/adhesive for PVC. Smooth application. Good balance between work time and cure time. Color blended well with the white PVC board. Hides my sloppy cut work.

Not sure how to start this review but I have used this product before with great results. This time I'm not sure if the product is any good. I live in NV. And the product was delivered to my mailbox outside, (thank you very much), when I found it, the tube was 104+ degrees. Buy the time I retrieved my temp gun, went down to 103.8°. I hope it's still good once it gets to room temp. I'll let you know. Next time put next to front door in the shade, thank you. Only 3 stars for preheating my caulking before I used it.

Takes time to set but once it does...it has a strong adherson to plastic