Homewerks 3070-252-CH-B-WS Outdoor Shower Kit with Soap Dish, Corrosion, Rust Resistant Chrome

This is a decent shower head. I don’t think you could ask for much more for the price. The valve system is surprisingly solid and heavy. The knobs are cheap feeling. The riser/goose neck is decent. The head feels very cheap.I took out the flow limiter in the head as others suggested and it works fine. I’ll probably replace it with one of the showers head from inside my house once I get around to upgrading those. The head to the riser/goose neck connection is the only place that had the slightest leak for me because it was impossible to tighten the head enough before it deformed and skipped the threads.I also find the goose neck portion surprisingly short. In order to get the head at the right height, the knobs had to be just above 4’ off the ground. Any higher and my 5 year old would not be able to operate them herself. They feel oddly high when using them too.I used washer and dryer line to hook up to a PEX drop ear that I put in. I wanted to share a picture of the adapter part needed to facilitate this connection. It’s a 3/4” MHT on the shower valve side to a 1/2” MIP on the W/D hose side. Hope that will help alleviate some people‘s concerns; while people posted nice pictures of their setups in the other reviews, I had a hard time seeing how the actual connection was accomplished.All in all it really was easy enough a cave man could could do it. Give it a try if you've always wanted an outdoor shower and aren’t so sure about it. Worst thing that can happen is you’re out $50. No big deal. Enjoy!

Completely rusted out in 6 months, must be replacedInstalled this over the weekend with some pex as a temporary outdoor shower. Works fine, but you'll definitely want to replace the shower head immediately. The one that it ships with is pitiful. My big concern is the rusty water I'm getting from the hot water side of the valve. I disassembled the system to see what was going on, and you can see that it's already rusting inside the hot water side of the valve. I used brass Shark Bite fittings and it's a home run w/ pex to the copper hot water loop - so it's not the plumbing. If it gets worse, not sure what I'll do, since this is a temp setup.

Just finished installing this today. I'm planning on using it to wash our dogs outside or in garage that has a drain during winter. I had a great dane which we washed in our personal shower but he scratched it up. he passed so bathing a big dog wash not a issue because we only had small dogs left. We ended up rescuing a Irish wolfhound and he hates cold water and local per washing stations are not big enough plus he doesn't exactly fit in a regular shower. Its simple and not high end just simple. Used pex then a 90° spigot so I can make sure it doesn't leak. Washed dog today after installing he was happy it was warm water on a hot day.

Nice looking product, however, the neck tube would not get tight with the nozzle facing the correct direction. I have to leave it loose and it drips water.

Great

It looks like a great shower, but it was missing the inset screws and the bracket that holds the hand-held shower wand can't be tightened and continues to slide down the shower pole. I tried to contact the seller to get these parts replaced, but there is no direct way to do this via Amazon. It's taken over a month for my plumber to install this outside, and now I'm not sure it will even have it working before the summer is over. I'm extremely frustrated over something that was to be a fun addition to the "back yard escape."

This is a pretty much basic barebones surface mount shower. I installed mine in my bathroom because I wanted a separate shower head. Completely independent of the tub fill. For that purpose that works just fine. As other reviews pointed out the plastic shower head went in the trash. The Riser tube is quite loose when screwed into the base. It took a lot of Teflon tape. I mean A LOT… to prevent it from leaking on both ends. There are no mounting screws included. But I had a box of anchors so that wasn't a big deal. Considering the price it's a worthy product. Just expect a few challenges during installation as far as leaks go until you get it sealed up. Once you get that done you're golden

Product was as I expected. Copied others' example and installed upside down, using washer hoses to connect to hot/cold spigots. I was concerned about flow and leaks because the fixture is not symmetrical around the X axis and there are fewer threads where I think the drain plug is intended to go. Nonetheless, water still flows well. I am relatively inexperienced (but stubborn) and after a couple tries and a combination of ~3+ wraps of teflon tape and joint compound, the joints are water tight.This faucet is probably slightly higher quality than an old 2-handle indoor faucet I have on a clawfoot tub. Time will tell how well it holds up outdoors. I may get a single handle faucet next time, but you can't beat this price.Spout pipe is fairly short and faucet needs to be mounted fairly high to accomodate a tall person. We considered coupling with another pipe to allow us to mount the faucet lower on the wall.

Retourné a mes frais facilement

très bien

** UPDATE **So I took the showerhead out of storage and installed it in our outdoor shower. Note this is the 2nd shower kit we purchased to replace the first one. This shower kit lasted one season. The shower is leaking from the mixer. It has corroded so much in less than a year that the kit is not useless. I have reached out to the company for a warranty. I don't understand why the company does not treat the inside of the shower kit so that it does not rust. That is the issue everyone is having! If someone knows of an alternative, please let me know. I hate having to buy something I know will fail.** Original Review **This outdoor shower is pretty good for the price. That being said the shower only lasted 3 years for us. We had to buy a replacement. This is our 2nd purchase. The shower stem rusts at where it threads into the base. It's too bad the threads were not properly treated so it doesn't rust. Otherwise it's good quality. It's a shame we had to buy a whole new unit. Everything else is well built!

Nice shower with the exception of the actual up-pipe which has rusted within 2 months of installation. Which is a shame because all the other bits have remained shiny and clear. Once fitted you cannot remove said up-pipe either...

I couldn't find the right fitting to connect to a garden hose, not the companies fault. Looked like high quality product though!