BTF-LIGHTING SP630E Bluetooth LED Controller Support PWM Monochrome CCT RGB RGBW RGBCCT Or SPI TTL IC Chip LED Strip WS2811 WS2812B WS2813 WS2814 WS2815 SK6812 LB1934 etc DC5V DC12V DC24V

This thing is awesome! My Govee floor lamp quit working after only a couple of months. Thankfully they sent me a replacement. Rather than throw away the broken one, I thought I would give it a try to fix it by replacing the LED controller with this unit, and to my joy, it worked! Saved a light from the landfill and works great with the BanlanX downloadable app. Allows you to change colors, create custom colors, gradients, moving lights, etc. via your phone. I’m really pleased with this and would recommend!

At first I was unable to get this to work. After some research and some input from the seller it is now working great!

Biggest problem I had was trying to read the instruction - very fine type. Easy to install, connect and set once you master the BanLanX app. Cost effective, works well.

it not hard to make it to make it work they look great

Installed in August 2025. Since Nov '25, one of two i ordered started to fail, causing the LEDs to blink erratically. Initially, i thought it was my wiring (it's a simple 3 wire, so it was hard to think it's something i can mess up...but...had to check myself before blaming others), or the connection clips. Note: i ordered two. One is working great. One is failing...same wiring after verification. Conclusion: Not well QC'ed and i had a 50:50 chance of something working/failing within a short time frame.

I have three of these and they work consistently every time I would say if your actual strip isnt lighting up, don’t just leave it plugged with the wires and stuff. unplug it because you don’t want to like burn out part of it while you’re troubleshooting I can almost guarantee it has something to do with how much of the wrapping on the cable you stripped or if there’s enough contact between the little wires and the contact plate inside the thing like sometimes when you clamp it down if you didn’t take off enough you’re clamping down on rubber so it’s not actually conducting anything. If you get a flicker, maybe the wires wrapped back around or something but you want to clamp directly onto the wires. and that sounds simple, but I literally have issues with it every time. that’s just how these things are. I’ve had the same type of hook up with other devices and converters and things and always there’s some struggling. Also, if you get a flicker, you wanna unplug it right away because it probably means that like one of the wires is not in but the other ones are so those ones are trying to conduct power, but there’s too much power going through them and you can destroy the strip.

It works very well! If you try to do a group on the app with two or more it can be a little finicky but still works great overall I used them to control the lighting in my car for my subwoofers

Works good