Front Axle Intermediate Shaft Repair Kit Replacement for Dodge Ram 1500 2012-2022 Part# 68146594AB 722N695BKA Flynsu

Excellent, excellent kit. I’m very happy with this. I bought and personally installed this on my own 2017 1500 Ecodiesel. The ecodiesel oil pan is much tighter to the differential extension housing then the hemi or v6. One bolt in particular is a pain. I used a wobble extension and 12mm 12 point, and a 13mm 6 point for a little extra slop - the bolts have a 12mm head. I was very careful not to round off the head. Anyway, the O-rings. The kit comes with three. The two thicker o-rings go on the intermediate shaft on both sides, on the outside of the metal dust shield. The thinner o-ring is not useful, throw it out. It’s intended for the longer intermediate shaft. If you look really closely at the old one, you’ll see a thin o-ring by the cv axle splines. The o-ring left over in the kit is too thick. This o-ring is unneeded with the brilliant rubber dust boots included in this kit. Be sure to generously grease the splines with go into the CV axle. I also lightly grease all bearings in this kit, especially the smaller needle bearing. Yes, they get splash lubrication from the differential, but it make take a bit before they get it. Also, before you do the job, drain the differential, as the oil will interfere with the RTV you’ll need to apply on the extension housing.

Super happy with this kit ! Everything fit perfectly and seems like good quality. For the price id definitely recommend. Never did this job before and wasn't that bad took me all day but was easy enough. Fit 2013 ram 1500

I purchased TRQ axles because my passenger side boot was ripped on my 2014 Ram. I had to purchase this kit, because I couldn't get the stock shaft off the passenger side axle from the factory. They where rusted on, ten years on the truck. They saved like 25 cents pet truck not adding rubber cups on each shaft on the truck. Thanks Dodge. I had to use a wheeled air cutting tool, to cut off the stock axle from the stock shaft. Besides that headache, this kit along with new axles I got off Amazon, have been working great. I also saved $1,200 doing the job myself. Tuffy auto wanted 600 bucks each side to change out the axles. Who knows what they would've wanted when they couldn't get the axle off, and then had to do what I did (cut and replace the shaft). Two new Axles and this shaft kit, under 300 bucks.

Awesome product. Comes not only all the parts you need to fix the Ram 1500 passenger side intermediate shaft issue but it also comes with boots to prevent the issue from coming back AND even has spare seals in case you flub one. Used this kit on a 2016 4th and 2019 5th gen rams. One item of note, consider either getting a cheap bearing press for the capture ball bearing that fits onto the shaft or bring it to a machine shop and get them to do it. I froze the shaft and warmed the bearing and even added gear oil to help it on and I couldn't get the bearing more than halfway on. I worried I'd damage the race with a Mallet and punch and my press was 150mi away at my shop. A machine shop pressed it on in 10sec for me and didn't even charge a $. Thanks for supplying this product at such a cheap price. Heat a 5k repair at the dealer.

Perfect fit and quality parts