SvitMolds Plastic Concrete Moulds DIY Driveway Grid Garden Tiles and Paving Stones Lawn Parking Grid S62

Q: How much concrete does it take to filll this mold in terms of bags?

Hello thank you for your question. You will need approximately 61 lb of ready mix concrete to make 1 piece. The bags are of different weights, so you can use either 1 bag of 60 lb or 2 bags of 30 lb. If you have any questions, please contact us - we will help Have a nice day. Sincerely, Alexander.

Q: does it save money in long run to make these yourselves? anyone done the math? also, anyone make white ones?

Hello thank you for your question. Of course, self-production will save you money. After all, the mold is reusable, and if you use the mold correctly, you can make up to 50 pieces. I recommend using high quality concrete To make high-quality concrete watch video https://www.youtube.com/watch?v=Kl93p76v3qA&t=8s In addition, a small amount of silicone spray can be used in molds before using concrete. Remove the remainder of the spray with a soft cloth. The main condition when working with molds is to remove the remnants of pre-concrete. That is, when reused, the mold must be clean. If you have any questions, please contact us - we will help Sincerely, Alexander

Q: The molds are only ~2 inches deep. These blocks are used to make a landscaped area that you can drive a vehicle on. Wouldn’t these crack immediately?

Hello Thank you for your question. Usually, these molds are suitable for passenger cars. But it matters what kind of litter will be under the tile. You need to make a litter of small stones, sand. Fill the holes with earth on top and plant grass. In this case, everything will be fine and the car will be able to drive onto this tile. If you simply put the finished slabs on the lawn or ground, there is a possibility that they will crack when the car drives in. After all, there will be uneven ground under them. If you have any questions, please contact us - we will help Have a nice day. Sincerely, Alexander.