BTF-LIGHTINGSMD 5 Pin 12mm 0.47in Width Transparent Connector Kit, 4xGapless Solderless 8pcs Corner Connectors,4pcs 5.9in Long 22AWG Extension Wires,Support 5050 SMD RGBW LED Strip

I wanted to install a ribbon light under the edge of the bed in our motorhome. I had originally ordered some parts for this and BTF let me know within 24 hours of the order that the parts I had ordered would not work together. They worked with me to get the correct parts for my application ordered and gave me additional help during the install (even on the weekend). The install looked and worked just the way that I was envisioning it due to the help of BTF’s awesome service.

These were recommended by BTF so since we bought the BTF Lights, we got these but they are really bad quality just like the BTF lights. After we cut the lights strips to install the around corners, they would not work with these connectors. What a waster of time and money. DO NOT BUY THESE OR THE BTF LIGHTS

So far so good. The connectors are not the easiest to work with. I used my meter to see how they were attached at each step to very I had a good connection. Do not strip the wire, cut square and push it in. Crimp with a pair of pliers. I did the strip side first then the wire side. I had to go back and squeeze them again on the strip side to be sure the metal was fully attached. Meter showed all connections were good. The connectors are inside the track mounted under the kitchen cabinets. I will update in the future if there is ever any issues, no update means no issues. I will copy here my overall review on the system for reference so you can see the entire system that I used. Note that the wire I also ordered from this company did not fit this connector. The wire that came with the LED strip and the kit worked great. I soldered the wires together to get the length I needed with some heat shrink added to protect it. See picture.WOW, what can I say - an application and product that work together and was very easy to install. That does not happen all the time. I decided on BTF-Lighting for everything to keep it simple. Reaching out to their customer support was promptly replied to with a design to fit what I wanted. Opted for the brighter strip as this is task lighting under the cabinets in both the kitchen and laundry area. Only snag I had was the wire did not fit into the connectors, just some quick solder and heat shrink tubing did the trick. Installed the controller inside the bottom of the cabinet, power supply on the top shelf of the cabinet to prevent little hands from reaching it. Attaching the controller to the app could not be easier as was the attachment to the remote.Controller, WB5 - attached to IOSPower Supply, BTF-LIGHTING AC100-240V to DC12V16.5A Max198Wremote, BTF-LIGHTING LM096 RGB RGBW 4 Zone Touch RF RemoteLED strip, BTF-LIGHTING 5050 RGBW RGB+Cool White(6000K-7000K) 4 Colors in 1 LED 5mChannel, Muzata 5Pack 3.3FT/1M Sliver LED Channel System with Milky White Anti-UV Sun Protection CoverOverall very happy with how all worked together for a rather easy physical install and a super easy software install and connection in IOS, I would for sure do this again in the next house.

I bought this product with BTF extension cord (https://www.amazon.com/gp/product/B07SHGYC27/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1) and they do not work together.It was recommended by Amazon but after 3 weeks I am still trying to find a connector that would fit 20AWG BTF extension cord. What it was supposed to be a 30 minutes project... uuuggghhhh! So frustating! :/

I didn't do enough research, and I bought a Great value brand led 5pin light strip, (which are great) but I needed to do a 90degree angle and bought these, but the straps have a rubber coating that won't let these connectors get a connection.

These don't make a solid connection. They'd seem fine for a while, then the plastic would just stop holding it down firmly and the strip would blink. Eventually burned out a strip using them. Not worth the bother. Just solder the strips. The time spent soldering isn't that bad compared to the unreliability of these.

I really like the variety that comes in the pack. However, the connectors are crimp type. If you mess up or a wire does not set correctly, you have to cut it off and throw it away. There is no way to correct it.

If you buy these double check the pitch of your strip. I build all mine up and when I connected them I realized all the connections were off.

One of the most frustrating products I've ever experienced. The connectors are very finicky and require an extraordinary amount of trail and error to get right. I wasted 3 of the 4 gapless solderless connectors before I got it right with all 5 wires connected and the full array of RGBW LED's working. . The extension pieces are a little easier to work with but opening the tabs is very difficult, expect lots of broken fingernails. Same for placing the LED strip under the connectors, lots of trail and error.In all honesty, I wish I had just stuck to soldered connections, it would have been a whole lot easier. I would not recommend this product.

These connectors are easy enough to use. However, I have one connection that isn't great - need to jiggle it a bit for it to work. I suspect it could be the LED strips that I chose to use. However, the way the connectors clamp down on the strip push pins through the copper trace and basically ruins it after that. If you need to remove the connector, that part of the strip cannot be used again since the connection is destructive to the LED strip.

The fact that I ordered the amount I needed but a couple clips arrived broken has caused me to not be able to move forward with my project. And they are now out of stock so I can't buy more. Very dissapointed.

Strip won’t stay in the connector, can’t put it back once it’s pressed in.Save the frustration and the money