StarTech 2U Vertical Wall-Mount Rack Bracket, 19in, 125lb (RK219WALLV) | Open-frame L-shaped bracket for network, Server, Data and AV equipment, EIA-310, 56.7kg, W/hardware

I have used this in an under desk install to hold a Ubiquiti UDM and switch along with a patch panel and shelf. The build quality is excellent, the fit and aesthetic is great and it is super easy to install and use. As you can see in the picture it works well and looks great, is exactly what I needed and wanted. Would 100% recommend

Having seen pictures this is generally installed with the router's ports pointing upwards, I have mounted on a stud wall with the ports pointing left and it is solid as rock and there is no flexing in the router when fixed into the rack. Make sure you know where your studs are if mounted on a stud wall. I drilled a few holes finding them. Easily filled and painted.

Great machined product that is robust enough to easily hold the weight of three Pylontech US2000C batteries. Exactly the same brand as the 4U product for two batteries that is sold by the Solar wholesalers. But they don't advertise a wall mount for three batteries, which is what is required to get 7.2kWh of batteries which can deliver 3kW :) Includes all the fixings I needed too.

High price but certainly worth it. It's a solid frame and has a hefty weight to it, certainly will hold up to even the heaviest of tasks. I have it as a mount for the underside of my desk to keep things within reach, but tidy and elegant. It has all 4 1U positions mounted and takes it with ease. Would highly recommend it.

Nice simple 3 bay rack for tidy rack mounting. Doesn't break the bank either.

I have two of these. They do the job. I still think they're a bit expensive, but spartan rack frames of such design aren't exactly easy to find. They are sturdy but inconspicuous. Can recommend.

Used this to rack mount a 1U switch and a cable management bar. Can’t fault it. Does the job. Startech make great products.

Well designed and made piece of kit, can be mounted in a variety of ways to hide rackmount kit away efficiently. Comes with a bag of cage nuts, bolts and plastic washers.

Easy to install, and well made.

Produit conforme au besoin, à savoir devoir racker un preamp 1U sur un bureau. la fabrication est robuste et bien fini.

Per chi non ha l'esigenza di avere un rack case chiuso, ma vuole tenere in ordine la propria installazione domestica non c'è niente di più pratico.

I had limited space in the utility closet in my old house. Going vertical rather than horizontal allowed me to use traditional network cabinet gear without taking up so much horizontal space. I used the following components with the rack and they worked great: Monoprice Keystone Jack Panel, 24 ports Cable Matters® 25-Pack Cat6 RJ45 Keystone Jack in White and Keystone Punch-Down Stand Leviton 41106-RW6 Voice Grade QuickPort Connector, White TP-LINK TL-SG1016 10/100/1000Mbps 16-Port Gigabit 17.3-inch Rackmountable Switch, 32Gbps Capacity CyberPower PR500LCDRT1U Smart App Sinewave UPS 500VA 400W SNMP/HTTP 1U Rack/Tower NavePoint Cantilever Server Shelf Vented Shelves Rack Mount 19" 1U Black 8" (210mm) deep GearIt 10 Pack, Cat 6 Ethernet Cable Cat6 Snagless Patch 1.5 Feet - Black Pros: - Solidly built. Once the 4 wood screws are installed on the sides, there's little to no flex. - Mounts on standard 16-inch on center wall studs. Note: The rack is 19 3/4 inches wide from outer edge to outer edge. - Nice, slightly textured paint. - Comes with hardware mounting bolts and captive nuts. The bolts have plastic washers so that they don't scratch the rack paint. - I attached the NavePoint shelf to the studs above the rack to hold my modem and router Cons: - Because all of the ethernet and RG6 cables hang down below the rack, I had to be careful about strain relief, especially where I coiled up extra cable below the rack. The Cable Matters® Cat6 RJ45 Keystone Jacks don't have a zip tie strain relief slot, so the weight of the cables hangs on the punched down wires. Next time, I'll use Monoprice Cat6 Punch Down Keystone Jacks (105384) because they have the zip tie slots.

Installed upder a shelf, looks great, feels very solid and works perfect. Provided hardware is a nice plus! I should have bought this a long time ago ! Would buy again absolutely, actually this would be the first thing that will come to my mind for small racks