Kolpin53350 ATV Rear Drop Rack Basket Convertible 3-in-1, Black, 43" l x 31" w x 10" h

Dad has one on his '14 Grizzly so I wanted one for my old '98 Foreman. The supplied hardware is just ok. If you drill the flat bars on the rack part of the basket and run the u-bolts under your rack and up through the flat bars they work pretty good. In all honesty you could go to the parts store before you order and pick up 6- 3" hose clamps and have much better mounting hardware. I used the 4 u-bolts as described above and 2 hose clamps at the front of the rack and I can lift the rear of my ATV off the ground by the basket. I can see justification to complaints it isn't very heavy-duty. I haul a chainsaw, gas, oil and a backpack and it works fine with that. I hauled a 12" x 1/2" steel target on dad's and it got snagged on the mesh and pulled one of the mesh welds loose. So keep in mind your intended use before ordering.2/15/15 Update: Hardware is still holding up great. Had this loaded down and went up a couple really steep grades I normally go up with no problem but this time I had to shift my weight forward to keep the front down, whereas before I could actually slide back a little on the seat to help the back tires eat. Otherwise I can tell this is going to be a long-term addition to my little Foreman. Great price compared to local national chain sellers and delivery was fast and free. Changed the rating to 5/5 since it meets my expectations for how I use it, will post back if any issues.

sturdy, easy to assemble and install, very glad I purchased it. have had it multiple atvs over years.

I was looking at this product and the Titan rear basket. I chose this one because it was a little less bulky and i liked the idea of being able to raise basket if needed. It was easy to install and came with 2 sets of U bolts in different sizes to accommodate different ATV bars. Not great instructions on where to put U Bolts, but just have to see where it sits and where the best place to bolt it down is. I used some 200 lb zip ties to make sure it was snug all around. I dont like that the bolts stick up but i plan on getting a rack pad. First thing i noticed is the rattle. Not from the rack, but from the mesh. Its not heavy duty mesh and it sort of "pops" in and out in the middle of the basket and the rear of the basket. That little bit of "play" in the mesh causes a vibration that is very loud. Its like the mesh is a little too big or not properly welded down to the crossbars that run across the bottom and sides of the basket. With some weight in there, I dont think it would be as bad, but i plan to tinker with it some more. Overall, good size, will do its job, but could use more heavy duty mesh and properly weld the mesh down to prevent this vibration/rattle.

It's a nice inexpensive rack but I did have to modify it for it to be solid and workable The U-Bolts that give you would not work for my machine and after I mounted it on the rear rack it still felt very weak on the back so I added two pieces of angle iron and attach them to the frame stiffened it up real nice but it did take a little bit of ingenuity overall excellent product for the price.

As others have stated I bought some heavier duty u bolts. It’s stout for sure. Fit my old Arctic Cat perfectly!!

If your buying to use out of the box you will get maybe one season out of it (if you’re lucky). I wouldn’t recommend this if you’re not putting extra welding work into yourself. Tack welds were very light. The cross bars for the basket didn’t even reach the angle iron that made the cage. Also, U-bolts were too short and narrow to fit, so plan on going to the hardware store. But if you don’t mind making changes yourself. This is a great starting point for the price. The side bars are very strong and allowing the basket to be set higher allows the ATV taillights to be visible (safety concern of mine). I had to notch out the front tray to fit around the rear seat of my two seat ATV and leave room for the hand grips for the passenger (no one makes a basket extension for two seat setups).

This is built well. No flimsy parts. Used zip ties and the “U” bolts to hold down on the rack. Cut the wood for the dog to ride on top. It’s works great.

Overall I really like this rack, but there are some points that could be improved. This rack provides a TON of space for working or storing items when running around the property. I like that it is lightweight and super easy to put together... took all of maybe 5 minutes to do. One thing I did add that is 100% not necessary was the 1x4 in between the ATV rack and the new rack. I added these to remove any noise from potential movement, as well as add a little more strength.A couple things I didn't necessarily love, but weren't a huge thing if you are able to get to a hardware store were: I needed to go buy longer U bolts due to the ones provided were fairly small.The mesh steel on the rack is pretty thin, so you really need to be careful that you don't break it by wrenching too hard on the bolts. Also I would have MUCH preferred mounting the bolts on the rigid brackets / flat pieces of metal going through the rack... but the way the wire mesh sits did not allow for that mounting option. I could probably slightly modify the rack to allow for stronger mounting.I'd make sure to go to the company's website to verify the rack "should" fit your ATV before purchasing on Amazon, but do know you will most likely by ready for a small DIY project to get it mounted. It was fun though!Pros:- Lightweight- Easy to assemble- Feels fairly sturdy once you get it mounted- DIY project was fun and simpleCons:- Needs longer U bolts to mount properly- Mesh steel is a little flimsy feeling

We bought this for our 2022 king quad 750. It's a seriously solid unit and comes in very handy. We use it daily to carry cooler bag, tools, chainsaw, gas and pretty much anything we can fit in it. I'm trying to talk Hubby into another one for the front. Great purchase!!!!

Purchased this to hold my ice fishing pails, and it did. The only problem was with the U bolts for mounting, not large enough. Other than that I'm happy with the rack.

better than expected. secured it with 6 stainless hoe clamps, built a box for top portion that holds two 20 inch chainsaws, bottom rack hold all my straps, sledge and fuel, very impressed

Looks and works great. Had to rig up additional support for my two up gf moto as back rack is to narrow for this

Fit my Honda Rubicon perfect, recommend this product.