Teexpert Crystal Clear Epoxy Resin Kit 1 Gallon Self-Leveling Coating and Casting Resin, High-Gloss & Bubbles Free Resin and Hardener Kit for DIY Art, Jewelry, Table Top, Molds, Wood 1:1 Ratio

This is the best resin I have found! Its always crystal clear..easy to work with, no harsh smell. I absolutely love this brand. I have NEVER had an issue with bubbles. Very easy to use!

This resin has become my go-to for coating and casting projects. It pours smooth and self-levels beautifully, leaving a high-gloss finish that makes pieces look professional. I’ve found it needs a little warming to thin it out for easier mixing, but once that’s done it handles like a dream. Best part—there’s hardly any odor, so I can work without feeling like I need a gas mask. Reliable, versatile, and a solid staple for resin work.

I was about to quit playing with resin after going through way too much money and ruined products because of other resin types. Then I tried this one and "I'm back in business, baby!" It does need a bit of work, but the results have been a resin that release the bubbles better than anything else I've tried, so to my fellow newish resin enthusiast... Here's how I've had best success: 1) Measure the needed amount of each into separate cups (I use reusable hard plastic ones with lids, so I have less trash waste) and place them in some warm (not hot) water for 3-6 minutes depending on the amount. 2) Mix the A+B resin in a new cup. I use an electric resin mixer and it does have to be mixed a bit longer than other ones - really look for those stringy part in there! 3) Place the cup back into the warm water for 3-5 minutes. 4) Pour slowly and then use a toothpick or craft stick on the sides of your product to make sure no bubbles got stuck there. And remember, the deeper the project the harder a time bubbles have releasing, so work in layers if you must. 5) Do your usual heat gun/lighter tricks, and voila, you'll *most likely* have a nice mostly bubble free result! One last thing... This is a lower viscosity resin and works great in molds, but I found that it really wants to fall over the sides when used as a top layer on coaster for example (even after a 15-20 minute work time), so you may want to use it as the bottom layer and then top coat it with a thicker working resin or wait long enough till it's thickening up a good bit itself.

I’m new to this and decided to try this brand. I really like it. It’s very user-friendly (except for those pumps). Every project I poured turned out well. Had very few bubbles and it is very clear after curing. I would definitely buy it again.

This resin is very hard to use. It is NOT easy to remove all of the bubbles and there are more of them than I have seen with other products. When put in machine to remove bubbles, it just ends up with a froth of material. Even running it through 2 cycles is not effective. By that time, the resin is warm and starting cure process. I did get this at a sale price, but I wonder (based on other reviews) if this was the unsatisfactory product that many complained about and that the company (or Amazon) was trying to clear from inventory. I have used other Teexpert resins with good results. I am afraid to trust this one. I am updating this review and adding stars. I found out accidentally that I was using it incorrectly. Unfortunately, directions did not cover everything I needed to know. Do not put this in degassing machine; it multiples the bubbles and getting rid of them afterward is impossible. No need to warm the resin, unless your work room is cold. There did not seem to be too many bubbles after mixing, so I waited about 7 minutes and poured into molds. I had to let it sit unattended for 10 minutes. When I came back, one or two spritzes of alcohol got rid of the bubbles. The more you do to this resin, the more you will see bubbles. I found I can let it do the work for me. I use only shallow molds, it works for these. However, it is not good at top coating. You can see how it did not level at the edges on this shallow coat.

The pumps are a game changer! It makes it so easy to get an even mix. This is the only resin I’ll ever get! Bubbles really do kind of float away which is very interesting, I’ve never seen it work this well. It dries faster than I personally expected. I used it to waterproof a vase for my 3D print

I really like this resin. This is the 2nd time I haver purchased it. It is clear, low odor, less bubbles. This one works best for my projects. Thanks

I absolutely love this resin and it is my go to resin for my resin products. The quality of the pieces are top notch. Its easy to use and creates less bubbles in the pieces. I had had peices for a long time and do not see yellowing that has happened in some other resins I've used. Its my go to and will continue to be. The price is definitely worth it.

Good

Best resin to use. Definitely recommend. Easy to use with little to no bubbles.

The product is good but the packaging says NO SHIPPING COSTS. I was charged two shipping costs.