NiArt 45-Sheets Transfer Film for DTF Letter Size 8.5"x11" Double Side Coated Matte PET Heat Transfer Paper Film for DTF Printer Powder Vivid Colors Direct Print for Clothing Colors Textile T-Shirts

I used this for the DTF hack with sublimation and it worked PERFECT. Will be a repeat buyer!

Do your research first. But this powder works good for me!

Decent quality Single-Sided Heat Transfer Paper Film. I was initially hesitant but after a couple of tries with extra shirts, I found a good process to work this with (including how to get the film to feed into my printer). Seems to work better on lighter color materials versus darker ones.

Love it will definitely buy again

Idont like it

NiArt 2X 1.1lb/500g DTF Powder Value Pack White Digital Transfer Hot Melt Adhesive DTF Pretreat Transfer Powder for Fabric Cotton Leather Nylon Lycra DTF PrintersWe do not have any fancy DTF printer. We have a low cost Epson 2760 Ecotank Printer. We believe this process will work on any inkjet printer. Will it be as good as a dedicated DTF printer, we don't know.This was just a quick and dirty proof of concept after watching you tube videos of how to do it. We printed a small picture of a multi-color rubik cube on the DTF printer, the paper was thinner than the printer liked and it took a few attempts for it to feed.We poured the DTF powder onto the freshly printed image and moved out around for a bit. We poured the excess powder back into the bag. We did not use any fancy expensive DTF powder sprinkler.My wife then turned the image over so it was face down on a piece of white cotton which was our test material. She then covered that with a pice of grease proof paper and pushed down for a couple of minutes with a hot iron.Yes we have a good image, the image would have been perfect but for a drop of water that came from somewhere and we guess washed some of the DTF powder away from the printed surface. This was a hazard of doing it next to the kitchen sink.Overall we are very pleased with the DTF paper, the DTF powder and the results of our budget process. Again this was just proof of concept to see if we could do it.Thank you for reading my review and looking at my photos of this product. I hope you found it helpful!REVIEW PHILOSOPHY: I only review a product if it is something I am capable of critically evaluating through comparison, testing and use. This means I have experience of using similar items; or that I have equipment or tools that I can test it with; or that I have an upcoming need so I can actually use. I am as selective about getting an item to review as I would be about purchasing that same item, so yes, I expect it to be a good product. My reviews are NOT based on packaging or if it was delivered timely.

The DTF paper was printed on with an inkjet printer and immediately covered with DTF powder then baked to cure 2 times. It worked. I notice that it looks a lot better on polyester drawstring bags. It seems to iron on within seconds on the bag vs several tries with t-shirts. Overall, it works.

I had no problem whatsoever with it going thru my Epson Sublimation printer. I set it on Glossy and it went thru very smoothly.As far as it working on dark fabric, it doesn't show up at all and aside from white of course I used all light ink in my image.Final conclusion:It's great with the printing process, comes out beautiful after curing.Good for light colored material like sublimation. However, I picked this specific film due to the fact that it would show up well on dark colors...that's a huge NO.In conclusion, it does not work as described but it's good for light colors.

never had an issue with produce so keep up the good work