Loctite319 Rear View Mirror Bonder 0.5ml

Worked really well, but you really do need to follow the instructions. It goes off really quickly once you put the adhesive onto the mesh. If you take too long getting it onto the windscreen, or if you try to move it once you stick it onto the glass, it will not work. So, you have a matter of a few seconds to put the adhesive onto the metal, place the mesh onto the adhesive, and position the base onto windscreen. Once in place, do not move, or the adhesive will not work. And remember, this only works for bare metal to bare glass. And really you need to separate the mirror from the base, if you're trying to hold the entire mirror assembly in place you will almost certainly fail.

Useless unless you are using on a bog standard mirror, anything heavier will not hold. There is also such a small amount in the tube that it is not worth the money.

Yes it works , followed the instructions and no problems , on my daughters BMW , the interior mirror fell off with the button still in it , after some careful wrestling with some grips I managed to release the button , So after carefully working out where to put the button I marked the screen with some tape and bonded the button in place as per instructions , I waited 30 minuets twice as long as instructed . The real test was after connecting the wiring back I had to quarter turn the mirror onto the button , this took some force and quite clearly the bond held and the mirror clicked into position , Amazon driver apparently was unable to gain access to my house , the ring doorbell suggests differently so I had to pay extra to get a prime same day delivery , had to happen when it really is urgent , 1st one still not arrived but I will keep it anyway if it does arrive.

First time was a fail!Followed instructions, cleaned windscreen thoroughly with scraper blade and alcohol as well as silicon remover, applied as directed, left it for 60 minutes and it popped right off when I exerted the slightest pressure on the mirror bracket.Second time was a success!I used some glass etching cream to prep the glass and tried the remains of the glue and activator pad. This time it worked and the mirror bracket is solidly attached to the windscreen, for the time being at least.Loctite ought to upgrade their kit to include some glass etching cream and expand their instructions accordingly.

Does exactly as it should. Refitted my large Motorhome rearview mirror and all seems sturdy so far.Keep an eye out for any run of the adhesive onto the screen and clear up before it sets - could do with that being mentioned on the instructions, but doesn’t affect my score.Clearly time will tell, but so far so good!

Oh dear, this product had been left in my warm house all weekend to ensure the glue was at room temperature. This morning I followed the Loctite instructions to the letter, yet disappointingle there was NO adhesion to the windscreen. In fact I am now in a worse position as the glue has stuck to the metal disc on the mirror but not to the windscreen, so I now have to buy a suitable mirror adhesive kit ad get the Loctite glue off the metal fob on my rear view mirror....Don't buy this, waste of money and time.

I was a bit sceptical after reading some reviews (after I had ordered it ) but used it as per instructions and it worked perfectly on a heavy BMW mirror so would recommend and use again . Advice would be make sure both bonding surfaces are spotlessly clean .

Followed instructions but it still only held for 2 days , however my mirror didn’t have a button and the instructions are more in favour of this so maybe buy a mirror with a button before trying this