Ultra-Flat Camouflage Spray Paint (Black (4290))

Absolutely amazing paint. I had plans to paint my Amoeba AM-013 Airsoft rifle black as it was tan, and this paint has given a near perfect mat black finish. The only issue I had was a slight run on a tapered part due to using a bit too much paint, but that was an error on my part and was not due to the product itself. A quick note, I highly recommend sanding the surface with 800+ grit sandpaper to make the surface better for the paint to adhere to. I then advise using some rubbing alcohol or methylated spirits to clean all dirt from the surface as it will further aid the paint to stick and help to provide a smoother finish. I found, in my opinion, that the best way is to spray 5-8 light coats following the instructions. I then left for 1 week for chip resistant curing, and then applied 2-4 more coats and left that for a week as well. The result gave me two chip resistant players so it would still be black due to the heavy beating an airsoft gun can go through. That said, one thing I cannot stress enough is DO NOT over-do the paint. you MUST use thin light coats to start with, and gradually thicken coats slightly. This does not mean the last coat should be really thick, the thickness between the first and last coats should not be distinguishable. The last coats, to me, are more directed to ensuring all areas are covered. Also, ensure that you have a properly set up work surface for painting in a well ventilated area. This paint does have a reasonably unpleasant odour and is pretty difficult to remove from things once it has settled. I used a large cardboard box to esure that paint was contained and kept the garage clean. TL:DR this is amazing paint and well worth the money. Gave my airsoft rifle a great matt black coat. sand and clean before application, apply a 5-8 coats and paint in a well ventilated and clean area.

Very good paint *****

Have used this to touch-up areas in the car that have been worn over the years.

The seller say's this is suitable for fabric's. I used in on a couple of molle pouches and a molle knife sheath and after a couple of coats, it did cover the original camo pattern. However, the fabric is now quite 'stiff' and feel's like it could crack. Krylon don't claim that this is fabric suitable, therefore I can't mark the product down. It's great on what it's advertised for (plastic's, etc..) just not fabric.

Easy to use, sprays evenly. Dries in 48 hours can be over coated within first / hours. The end result justifies the price. I used clear coat on top which makes the finish extra durable. I bought the black to add to four other colours I bought of the same seller Tactical UK on eBay. On both occasions the sprays arrived next day well packaged.

Gives a fantastic flat black finish. Really easy to use with the non drip nozzle. Perfect even coverage, no drips. I would 10/10 would recommend.

These gun parts were previously red and with ONE coat of paint they are almost all black. There is some parts that are still red but that will be easily fixed with one more coat. If you want to paint your airsoft gun USE THIS!

The closest I could get to the recommended spray paint for aquarium pipes/gear. Worked great and has a nice matte black finish. I was careful to let it cure for about half a week and everything is still alive. (That's usually a good sign!) Did still get a few tiny chips on carefully handed pieces, so I'd definitely recommend multiple light coats for objects that will be interacted with heavily during use.

Not going to write one of of these tedious "high-school english class" reviews. I'll just point out that I've been using this Krylon Camo paint (in various colors) since it came out - and it's the best I've found at adhering - long-term - to plastic/fiberglass materials - even those that flex (like ATVs, coolers, weapons components, etc). Note that it does NOT mix well with Rustoleum or other paints (trust me), so if you need to touch up something just get more Krylon. I've tried it primed, sanded, unprimed, unsanded, etc. If you thoroughly clean the surface (remove all oils) it'll stick. Great paint, no issues with defective cans/sprayers (common to rustoleums lately) and worth the money. The VERY flat finishes are perfect for camo work. The quad in the pic is actually "Aztec Red" - I removed all the body pieces, sanded/primed and used 2 cans - it's been on there for years.

Pintura cubre muy bien por todas la zonas se seca en el tiempo que manda el fabricante y eso el muy bueno y vendedor excelente en responder

Lo usato per dipingere una riproduzione a salve ed è stato il miglior prodotto trovato come durata non saprei quanto può durare ma per ora direi buono visto il contatto con l'olio. Non posso dire cosa c'è di negativo visto la mia soddisfazione grazie.

la krylon marque incontesté du paint job de réplique d'airsoft j'en avais déjà utilisé donc je n'ai pas était surpris par la super tenue et qualitée loin de la

Servizio perfetto, 10 su 10. Sono molto contento di trovare produtti vendutti da uno store così buono e attento con un servizio di assistenza buonissimo.