Sea FoamSS14 Engine Cleaner and Lube Foam

Certainly did everything I hoped it would do, wished I'd kept my eye on the elbow piece to help with keeping the hose around the throttle body hose, it snapped while installation and I only got to use about two thirds of the product.It did however do what it is supposed to do, it cleared out so much build up in my recently purchased 16 year old land rover V8. The amount of smoke and foul smelling gasses that flowed out of the exhaust pipe was alarming. I had to find an unused corner of a factory car park to do the job as per instructions. The run on the local bypass caused alarm for many of the other drivers I'm sure, and for a few days afterwards it would smoke even after getting up to temperature. And the smell is quite awful so try not to have your heater blowers on when at a junction waiting in traffic.The immediate effects were a noticeable acceleration performance, the faster start on ignition, the noticeable holding of temperature without any peaks and troughs between idle and high load.I inspected the spark plugs before and after the treatment and the condition of the cylinder chambers were noticeably shinning more than before and by changing the sparks for new, the noticeable misfire it had before has gone.All in all, it has reduced the fumes, increased the performance of the spark and a believe, been part of a thorough service that has increased the efficiency of this old engine.I'm seeing an increase in fuel economy, a smoother ride, a lot less of a visible wobble at idle and after a combination of other essential jobs (oil, filters, MAF, sparks, belt, coolant and new exhaust / O2 sensors) it's feeling like a new car.I'd suggest using SeaFoam on an old engine that has limited or very poor history, but do it away from your neighbours. The results are awfully antisocial.

My mum had a petrol four stroke(?) lawnmower that didn't start. The shop didn't really seem to do anything to try and fix it when we brought it in - I think they just wanted us to buy a new one.One day I got determined to fix it, and so in addition to changing the oil and replacing the air filters, I used this stuff to clean it out.It worked really well, and appeared to thoroughly clean the carburettor. After cleaning it ran very cleanly even on regular unleaded petrol from the petrol station.As someone who knows nothing really about engines and mechanics the instructions where easy to follow. I still had some left after using it so I'll save it for another job like the petrol strimmer if it ever needs it.

The media could not be loaded. Great product. Will definitely use it again. However, I would like to warn those doing it the first time at home. As you will see in the video clip I made there will be a lot of smoke depending on how gunked up one's engine is and the engine light will most likely come up. Engine will vibrate - misfiring occasionally etc. Nothing to worry about. Once the process is over engine light can be reset by using one of those obd2 port dongles (i bought one off amazon for £8). You can also see fault codes at the end of the clip I personally had. Yours may be different though. Now, engine runs smoother and it is recommended by seafoam to use it every time you service your car. I am not a professional mechanic just an ordinary diy person who experimented, got stressed out about this experience so that you don't have to. This product was used on a Mazda5 2l petrol engine MZR aka Ford Duratec. Hope it helps someone

I have a Honda Jazz 1.5 with direct injection, it has not been clean up since brand new.My car got better respon and smoother at lower RPM range...Will consider this product for next service.

Used to decarbonise a 2 stroke engine. Tricky to get the spray extension to stay put in the air intake but when sprayed directly into piston via spark plug aperture it works quite well; not pristine but has certainly reduced the layer of carbon build up on the piston face.

The can does not hold enough accelerant for the liquid to come out. I used about a quarter of a can before it was useless. A complete waste of money. I suggest buying Seafoam from a motorfactor. Avoid

worked on my suzuki vitara 1.4 boosterjet , cleaned it out making it a lot better to drive. would reckenmend to any one wanting to clear gdi engine valves .

I have used this product on 6 vehicles so far, it has made my cars feel lighter when driving, improved acceleration response and no doubt helped clean out carbon