PRO BAT6 Coil Pole Magneto Flywheel Stator 50cc 110cc 125cc 150cc Pit PRO Trail Dirt Bike Thumpstar Quad ATV Go Kart Dune Buggy

Works well, fits perfectly, great price

The coil for my son's Tao Tao GK110 suddenly went out. After checking voltage tolerances I determined the old coil was bad. I installed this coil, but had to change the position of the wires in the plug. This was easy to do with a bobby pin; stripped off the little plastic nub on the end of the bobby pin, and use the pin to unlatch the metal pins in the harness so you can pull them out and replace them in the correct order. The kart fired right up and runs like a scalded dog again.Side Note: make sure you get the pickup wire tucked out of the way (the blue wire that goes to the black pickup) or the flywheel will cut it in two. Same goes for the other wires as well.

Had to change connectors but works great great value for the $$$

I used the on my tao tao 110 pit bike and after several hours of troubleshooting, I realized the the pins on the stator were different than the ones on the harness. Repinned it and it started right up!If you don't know how to unpin molex connectors, just do a quick YouTube search and it'll tell you.

Everything looked the same ad my old one same plugs and everything however I'm only getting power from one of the wires and my wheeler still won't start could be a faulty magneto or maybe it's not the right one

Great deal

Fit perfect but lasted for about 30 minutes then started acting up again

So i bought a flywheel puller for a gy6 it stripped out, welded it on that workedAll the light kits for xr100’s are like over $100 just for the stator, this one bolts right up and you just use chinese scooter/pit bike parts for your lighting needs

NFG OUT OF THE BOX!!!!