Dorman 800-082 Fuel Line Fitting

ممتاز جدا

These connectors work great, but getting the nylon fuel line fully attached can take a lot of work. Lot's of YT videos on how to heat the nylon fuel line to attach to the fuel line fitting using a heat gun, but be careful not to get the heat TOO hot or the nylon line will bubble, around 400 degrees is about right. Move the heat gun around the entire diameter of the tubing. As soon as it's pliable enough, force the tubing onto the Dorman fuel line fitting. Maybe place the connector against a hard surface such as a table first. If it doesn't go past the 3rd rib on the connector, heat it up some more, keep it going on as straight as possible, and be patient. I replaced a fuel pump on a 98 Ford Explorer, and this Dorman fuel line connector ended up getting the job done, and the best part, NO LEAKS!!!

Worked for my repair needed

This is perfect for a 2002 Saturn L100 fuel tank output from the fuel pump to the filter (fuel RETURN to the tank requires the smaller 5/16 quick-connect). This 3/8 adapter will also work on the fuel filter outlet to the engine. Over the years these quick connects wear out, get loose, and just pop off...not a good thing while driving on the highway. Also get Dorman's 3/8 nylon fuel hose and a heat gun, put a spark-plug sized wire inside the hose to prevent kinking, and heat the hose just enough to bend it to the correct shape of the original hose.

Was hesitant to purchase this to repair a rotten fuel line on my plow truck, couldn't get 100% confirmation that it would fit the fuel rail quick disconnect on my 5.3 engine in my 2005 sierra. After purchasing this, 25ft of dorman nylon fuel line, and a couple of nylon to nylon unions I made a new fuel line to splice into the existing nylon fuel line coming off of my fuel tank. This quick connect fitting worked perfect to attach my new fuel line to the fuel rail on my engine, and I'm told this should also fit onto the quick disconnect tube at the fuel tank sending unit as well. I also purchase this same style of fitting but in a 90° configuration but it should work just the same.