Burstfire - 2 in 1 - Brass Case Annealer & Case Prep Center - RED, NEW GEN 2 - Burstfire-2in1-RED-V2 - Annealing Machine - For Reloading - Torch & Hose included

Excellent annealer for the budget minded reloader. This is simple to use and a bonus with the case prep option for cleaning and demurring the cases before charging them. Even the 300 Win Mag belted cases process flawlessly in this machine.

This really seems to be a well-made piece of kit. Comes with everything to get you up and running except the gas. Ran some .308 brass through and worked like a charm. I had been using Little Crow shell holders in a cordless drill. Got the job done, but a pain. I’ll anneal after every firing after buying this BurstFire.

This annealer is working great so far. over 3000 .223 ran through it and a handful of larger cartridge's. easy to change out the feeder wheels and easy to setup if you have a little common sense. have used the prep center on top with burstfire's attachments and have zero issues with that as well. saves me loads of time on prep after trimming. good product so far!

This is the best deal on the market I could find in terms of good annealing and trimming, all in one.Pros:1. Absolutely excellent build quality2. Finish is awesome3. The results of the annealing are consistent and easy to adjust to get it just right4. The added bonus of the case prep station gets rid of one more tool and set upCons:1. I really don't have one at this time. I hope she lasts as good as she looksIf you're thinking about annealing and haven't done it yet, you are missing out of getting more out of your brass and several more firings. You can't beat this deal/features for the money.

Reloading rifle cartridges

This annealing machine works great. I use to do this by hand with a drill and socket. No more. Now I can do a couple hundred in minutes or a couple thousands in less than a couple hours. I usually load it up while I'm doing another task and just listen for cases to drop in a cookie sheet. When I can't hear them dropping, I know it's time to refill the tray or shut it down. Figuring out the delay time is simple. I anneal every time I shoot a case. This machine is awssome.

This is by far my best reloading investment in years. Cut my case prep time by two thirds. The annealer set-up was quick and easy. The annealing is perfect and easily repeatable. (31 seconds for 260 REM) 34 minutes to anneal 200 cases, and I was able to do other things while it was doing the work.Notes:1. watch the torch. They tend to turn down a little. Just make sure the blue cone in the middle of the flame is just touching the base of the neck at the shoulder and you will have perfectly annealed brass.2. Get templaq 750 degree. Swab some inside the necks of 5 cases to get your timing right.3. It's an open flame, don't leave unattended or use where flammable material is out. Keep your gun powder away from the flame.

I have had this for 3 years now the annealer works great. Had to replace one of the prep center motors which I ordered from Manufacturer for 25.00 dollars.