Fashion Cool Illuminated Rocker Switch: FABOOD F 7 Pin rocker switch is a SPDT on-off-on switch that works like a seesaw, easily turning on or off any lights. Its surface cover is designed to be streamline curved with etched patterns.Built-in LED light emits perfect beam to light up the pattern when the switch is powered up, which also allows you to clearly catch sight of it in a dark environment, no more fumbles! It comes with little jumper connectors and single connectors all nicely made with ends on them and a rubber protector on the female ends. The whole switch fits into a standard square cut out same as all the other switches for most 4x4,Polaris RZR, Off-road, SUV, ATV, UTV, Polaris Ranger RZR, Motorsport, Boat, Marine, Jeep Wrangler, etc. Rated at 20Amp 12V/DC and 10Amp 24V/DC, it is mainly used for controlling the LED light fixtures of car, boat and yacht,such as led light bar, headlights, tail lamps, work lights, fog lights, auxiliary lights and so on. Surface size is 2" (50mm) x 1"(25mm). Standard size mounting hole 1.41"(36mm) x .86"(22mm).
G**A
Illuminate switch with vehicle lights as opposed to momentary illumination.
This momentary rocker switch was exactly what I needed. It made the installation of an inexpensive Harbor Freight winch in my Ranger look factory original. There are bunch of previous comments are written by folks with little knowledge or a review of a different switch. The supplied jumpers are meant to activate the light within the switch for either up or down only when the switch is pressed. I ran a separate wire from the vehicles lighting circuit to each of those spades to have the switch lights remain on with the vehicle lights. This is a much more practical set up for a vehicle. After that follow the diagram for ground, up, positive and down.
M**S
Dont use wiring diagram shown in the photos
Maybe just bad contacts in relay but #1 the winch in and winch out contacts were reversed. Maybe switch head installed upside down. Not sure.#2 the one i got had direct short from 4,5, and 6 to #7 ground 4 ohmed to ground on all position and 5 and6 ohmed to 7 with winch in switched. That side of the switch was worthless so i could only wire 1,2,and 3 side with the ground connected. This is nowhere near the freaking diagram. Dont waste your money. Complete junk.
K**S
Cool Switch. Functions perfectly.
I bought this switch to use on my new winch. It works perfectly, and despite other reviews- does NOT stick one way or the other. It is in fact a momentary switch. The power only operates when you push the buttons. The only thing I don’t like about the switch is that it only lights up when you press it, it has no option for lighting with your headlight switch. As the switch is not advertised to light up like that, I’ll still give it a 5/5 stars.
D**S
No wire diagram
**updated 11-14. Used switch first time on the trail. Switch doesn't work half the time going in. So have a backup plan** So far it seems like an ok switch. The jumpers are nice. But there was no wire diagram included so I'm having to search and dig for it.
M**K
Happy with this purchase
For a $10 switch, this fit the bill perfectly. Inexpensive, easy to install and works and looks great inside my ATV. Can't attest to how long it will hold up, but for $10, I won't be disappointed.
D**C
Must read
Not wired for forward/reverse for anything other than a winch If you’re looking to use this on a linear actuator. you’ll need to buy a solenoid. To reverse the polarity, or buy a different switch
H**R
Fit perfect in Gator dash
This switch fit perfectly in one of the spots in the dash of my JD Gator. Looks like a factory installation! Lighted to boot!
J**E
Just what I needed
The switch worked well. It didn’t come with a wiring diagram but there was one on the item description so I made it work. Overall good quality and looks good in my rzr
Trustpilot
3 weeks ago
1 month ago