Fiddes Satin Finish Hard Wax Oil 250 ml, Clear

I picked up a recommendation for this from a utube video of a guy sanding and treating wooden worktops in a kitchen. I had a lovely but battered oak table that needed bringing up to scratch so though I would try it. After a good sanding back and a couple of coats with a light sanding between coats, the table looks amazing. The finish is superb and the finish on the wood grain is superb. It also has polyurethane in it so the surface is tough with a great shine. I will be buying it again for other projects and would recommend it to anyone.

Have always used a varnish before, Never again, This Fiddes Wax oil is so easy to put on a well prepared surface, I scrapped and sanded down two aged kitchen worktops then using a quality brush over the course of two days I gave it three Coats and the finish is fantastic providing you follow the directions on the tin, If you can manage not to use the worktops for 7 days to let it completely harden (Difficult, but not impossible) you don't have to but the longer you leave it the more hardwearing your tops will be, Will never go back to varnish ever again.

I’ve tried in Matt and satin, both give a great finish.Easy to apply. Protects the wood and makes it easier to clean

Quite expensive for the size of the tin. Must admit I did read the size but somehow expected something bigger - my fault I know. There was just enough to treat the table I had made. Goes on very easily by brush but took quite a time to dry as I was working in the garage so not perhaps as warm as it should be. But it did dry and gave an excellent finish. If anything I would say it was a bit more shiny than I expected but that's not a problem, just something to be aware of. I would certainly use it again.Durability so far has been good, but only time will tell.Would certainly recommend, just a little pricey.

All good went on the newly sanded tabletop, sealed it well but it is more of a varnish than a polish

I watched a video on YouTube as my 30 year old worktops needed completely taking back and I wanted hard wearing, good quality seal. This was recommended on the video and decided to go with it. It is easy to apply with a good quality paintbrush and dried quickly. I needed to do 3 coats but that was because I wanted to fully protect it after all the hard work of sanding back to bare wood.. It is clear and dried to a soft waterproof sheen. I love it. It's expensive for the 250ml it's well worth it and it goes a long way. No more Danish or tung oil. Will be buying more for my dining room table and chairs.

Gave a beautiful finish to a pitch pine table I made. Follow the instructions!

Looks great and goes a long way