Art3d 19.7"x19.7" (Pack Of 12) Wall Panel 3D Pyramid, Snow WhiteClimatePartner certified

I recently added the 3D diamond wall panels to my boys’ room, and I have to say, they absolutely loved it! The transformation was incredible. Installing these panels was a breeze thanks to the gorilla glue construction adhesive. It held everything securely in place, ensuring a long-lasting installation. I was delighted to discover how easy it was to install the panels, saving me time and effort. To achieve a seamless finish, I used white caulk to fill any gaps between the panels, and the result was flawless. The walls now have a stunning, three-dimensional look that instantly elevates the room’s overall aesthetic. I couldn’t be happier with this purchase, and I highly recommend these 3D diamond wall panels for anyone looking to add a touch of innovation and style to their space.

I remodeled a guest bedroom and wanted to put in a floating wall with a TV and fireplace. I originally though about doing this wall with a dry stack stone, but it was cost prohibitive and would be messy and time consuming. I'm glad that I went with these 3D panels instead. Everyone who has seen them has been wowed by them. I built the floating wall using 3-1/2" steel studs and covered it in 1/2" OSB. I primed it with white Kilz (so that any gaps in the panels would not be as noticeable) and used double sided carpet tape to adhere the tiles. The tiles look fantastic! If you are going to build a floating wall, I would suggest that you build it to the same dimensions as the number of tiles you plan to use (width and height). I don't think you could find a way to make a cut edge look finished, unless it butts up against and adjoining wall. To cover the edge of the OSB (plywood) I used the plastic drywall finishing edge from the local Big Box hardware store (see the second picture). I left approximately 4 inches of overhang on all sides and mounted these chasing LED's from Amazon https://www.amazon.com/gp/product/B07M9XHYVB/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1in these angled channels https://www.amazon.com/gp/product/B01LL3S006/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1The TV mount and fireplace are also from Amazon. When building the steel stud wall, I internally braced the TV mount location with wood 2x4" and ran a power cord to that area.I used a table saw to cut the panels for the bottom row, but I could have used a handsaw or really good scissors. These panels are a decent thickness and not flimsy at all. There are microscopic gaps between the panels, but they are only noticeable close up. If you are concerned about the gaps, I would suggest that you mount the panels, then fill the gaps and paint the panels with a paint suitable for plastic. BTW, the electric fireplace puts off quite a bit of heat (mostly forward and up) and it has not affected the tiles at all.

Loved these for the accent wall in my basement. I added trim to all 4 sides of the wall to help frame it in and I think it turned out great. Easy to cut the panels with a good pair of scissors. I used a tube of clear gorilla glue with a caulk gun. It was nice that I could move them into place if I didn’t get them into the perfect spot immediately. But it was a little hard to hold them in place long enough for the glue to partially set. They tended to slide down with gravity. I wanted to start from the top because I wanted the cuts to be near the floor because that’s where seals/chairs will be but if you start at the bottom then work your way straight up, the panel underneath will prevent slippage. And use a paper towel to rub the edges against the wall and that wipes away access glue. But because the panels are PVC it’s easy to run the glue off after it dries. Using my hands to hold/push the panels in place, I got some glue on the panels but clean up was pretty easy. Also, I rotated each panel 90 degrees so the geometry looked more random then having an actual pattern to it like you see in most of the product images. (My ceiling is not finished, just sprayed black)

You'll need something to hang them, I used double sided mounting tape.

Easy to install and work great with accent lighting.We just used double sided tape and a Govee light rope.Edit: after a series of very warm days, the double-sided tape I used ended up not being sufficient. Using some sort of silicone will be a better option

If you want your wall or ceiling to stand out, than these tiles are for you. Comes in different colors. Does come with anything to stick them you have to purchase adhesive glue or tape.

Super easy to install. Looks great. Fantastic easy DIY update

Excelente 👌🏻