1/4"lock on air chuck,mini air compressor portable tire inflator tire chuck hose end with barb connector for hose repair-3Pack

This thing works great with my compressor. Hooked it up without a hitch and it's been running smoothly. Really happy with the performance so far. Makes the job much easier, for sure. Would definitely recommend it to anyone needing something similar.

Needed to put a quick disconnect onto a screw on. Works great

Clamps onto valve stem firm and is solid. Only issue is some air escaping when disengaging.

good product,good price!

These fit a standard Schraeder valve stem, used on all cars and light trucks sold in America and probably other countries. They do not fit the narrower Presta valve stem, used on some high-end bicycles.My old clamp (30-year old Sears inflator) would leak around the edges, and even pop off my bicycle tire (80 psi). I had to hold the the clamp on, and align it correctly. This replacement clamp fits tightly, and is a bit hard to clamp down. But once on I see that my tires fill faster, as there are no leaks.I took one star off for durability (not the heavy metal construction of the old clamp), and one for Ease of Use. That's because I don't like the bulky, awkward hose clamp they provide for attachment to the inflator hose. I wish there were some way to use a crimp ring like the original had.Update 08/04/2023 If you have a pex cinch tool you can replace that bulky hose clamp with a 3/8 “ pex cinch clamp. No leaks when tested on my bike at 80 psi. See picture.

The chuck was easy to install on my Black & Decker Air Station. But, not sure if the ones that I received were defective but they are hard to remove from valve stems. The rubber seal seems to be too to tight as I have to remove it with force off the valve stem causing air to leak out.

Used to add a quick connect for my Milwaukee M12 inflator. Works like it should.

A needle pin inflator was used in the chuck of my decades old Interdynamics TruckAir 300 compressor to inflate a ball.The Harbor Freight needle pin inflator base got stuck in the chuck and would not come out without destroying the chuck. Using pliers pulled the needle from the base.The LUMITECO 1/4" replacement chuck fit perfectly in the compressor's air hose, and rotating the hose clamp around got it out of the way.Locking it on to the tire's air valve was smooth, but pulling it off was a little tricky.I attribute that to the rubber inside the chuck being new, whereas the rubber in the old chuck was worn from years of use.The corner of the opening for the lever and the two side pins were sharp, but the use of a file took care of that.The replacement chuck will give my compressor another 20+ years of service, as long as I stay away from Harbor Freight needle pin inflators. Sorry, HF.I read the reviews for this compressor on amazon and was surprised by all the negative ones.Mine has given me over twenty years of good service.One commenter said the 12v plug fell apart in his hand.The first thing I did when I got the compressor in 2003 was to replace the admittedly cheap factory plug with a marine-grade 12v plug from Marine West, and have never looked back.