PLATINUMEDGE Car Headlight Restoration Kit, 3 inch Car Headlights Lens Polishing Sanding Discs with 3 inch Buffing Polish Pads for Drill, 30 Pc Car Headlight Restorer and Renewer Kit

The instructions are very easy to follow, and the results were surprising. Sure, based on the clear lens cover curves, you have to be very care not to burn the plastic (I did the first time, ouch). Also, be careful with the fine thin disks, as they will rip if the drill wiggles or pressure is too much. End results is what surprised me after applying the clear sealant.

Worked great.

Worked well. The Velcro piece started to separate after the first use. Still holding together after headlights though. Good value for the money.

Bottom line, for the price and associated effectiveness, this repair kit can't be beat! The spread of different grit levels is just right and there are enough of each grit to complete both headlamp lenses. You will need to be patient, but simply follow the package insert instructions. You will need to use a cordless drill/driver and also you will need to purchase a small bottle of polishing compound for the final act. Pro tip #1, when I got to the end of the process (before final polish), I used 1000, 2000 & 3000 grit to remove all the score marks from the rougher grit pads. Pro tip #2, don' buy any kits which require hand sanding. not nearly as effective as the drill/driver method. Good luck!

I just used the sanding disc set. I barely got 1 set of headlights that were not that badly fogged over. The 1000 grit was detaching from the velcro layer and there were not enough of the 800 grit discs. I was lucky to make it through to the polishing. I had to use the 1000 grit by hand, to make up for the lack of 800 grit. Almost had to go buy some 800 at the store. Overall I give this a 3 out of 5.

This product works perfectly just follow the steps to get good result.

Tried to use these pads as instructed but they actually ruined my headlamps ands made it more hazy. Now I have to buy a brand new lens cover at $135 without labor to fix what this product did not deliver

plenty for two headlight assemblys.

It took me 1h to sand 1 headlamp. Happy with the results. 2010 Honda civic.

The media could not be loaded. Product worked very well, just need to go from 320, 500, 600, 800, 1000, 2000,3000, plastic polish cream and then high polish foamy…use grits in the kit don’t miss one grit and skip because it won’t polish out, need to go through sequence as per grit and shown in the kit, and you’ll have new head lights again! :)

To clear oxygenation on headlights. They worked just fine. Used a portable drill mostly with Mother's polishing fluid.

For the price this kit couldn't be better. Sand paper was all good quality, all tools that came with worked exceptionally. Didn't need to apply alot of pressure and have enough supplies left to do this process again 2 more times. I dry sanded until I got to the 1000 grit then wet sanded for the rest. Used only a single pad both both lights in each grit. Pics show before, then after 800 them after 3000 and finally after buffing. Would suggest this to anyone before replacing lights. Keep in mind this is only for plastic lenses.

Good product and ok price for the quality delivered.