NEU MASTER Brad Nailer, 2 in 1 Electric Staple Gun/Nail Gun for Wood, Upholstery and DIY Projects, 1/4'' Narrow Crown Staples 200pcs and Nails 800pcs Included

Excellent! I bought this specifically to install baseboard with 2" nails in 5 rooms. It did a superb job. It has a round knob to adjust the power or depth the nail or brad is being hammered in. I prefer to have it driven in such that it is a bit below so I can use caulk or compound to fill and make it even and then paint so it is undetectable after the nail is drive. It comes with an assortment of different nails but no 2" nails which I bought inexpensively separately. It is compact and easy to handle. Nails are easy to insert. Attach a 20' extension cord and access to an entire room is easy.

Electric brad nailer for a project I had planned. Well right out of the box it started jamming. When I went to disassemble the head (easy enough to do) it literally exploded sending parts all over the place. What I didn't know was I should have removed the brads from the magazine before disassembly. The spring force blew all the brads and head parts out of my hand, so I wasn't able to observe how it was put together or how many parts were involved. Finally managed to figure it out after a couple of errors in reassembly. Even after this the gun continued to jam and shoot multiple brads at once causing more jams. By now you are probably why my 5 star rating. This is the reason. Through all this I contacted Spartatools csAnd they consistently got back to me within 24 hours. They walked me through aal the procedures and even sent pictures of correct assembly. We then swapped a couple of emails to figure out the jamming issue, again with pictures shared back and forth. In the end we couldn't get it figured out so they said they would send me a new unit and don't bother sending the old one back. Two days later the new gun is here and working well. I have been shooting 1.25" 18ga brads into 7/8" boards and using the proper two hand method it sinks the brads flush on the highest setting. Good tool.

The media could not be loaded. This nailer does not live up to its specifications say it will drive a 1 1/4 inch Brad into trim, I took it on a job to install trim started on level 5 and it would not drive Brad flush turned up to 7 and it would still not work properly I took it back to the shop and used the brads that came with the nailer same result brads we left about 1/16 to 1/8 above the surface tried 3/4 brads same result. Contacted Amazon they suggested I contact the vendor which they said send in a video, which I did e - mailed and text as of today 3/13/25 I have not received any response 2/17/2025. I would strongly suggest you not buy this product for 2 reasons 1 it does not preform close to specifications and to customer service is 0.

UPDATE: Customer service contacted me about my review and refunded my order, so I don't feel it's fair to leave it at 1 star. However, the information below is still relevant.Despite using the recommended nail size (18GA) and length, this will not pierce any type of wood I attempted more than 1/4". It is not well suited for anything more than arts and crafts in soft materials.

I don't know why some people don't like this gun! It fires staples up to 1'' and brad nails up to 1-1/4''. If you use an extension cord definitely makes the gun weaker, so I suggest using a short extension cord and 12gauge cord at least if you do need. and most of the nails get all the way in. I just had to finish a few of nails with a hammer.The idea is, it's a very convenient gun for small projects. You can only get so much out of electric gun with these things. Otherwise you have to get an air gun with more power.So, don't expect a perfect product - but if you can use 1-1/4" nails for small projects, this gun works great!It does help if you don't use any extension cord, and you apply pressure to the top of the gun head while you sink the nails - take your time with the nailing and they'll sink in all the way.Anyway - for small and quick projects, this thing is amazing! For the convinience and the price, I'm definitely rating this 5 star.

I have air nailer which is much more powerful but each time I need to power up air compressor. Thus want to try this electronic one, just plug in, very convenient, but the power is too weak, even adjust to deepest depth, it won't punch fully into even the soft old wood. Weight is ok.

I have used various manual, electric and pneumatic nailer/staplers in my woodworking projects. Each has their strengths and weaknesses. I love my pneumatic brad nailer for many things, but they seem to be limited on the smallest size of nail they can drive (1.5" or greater). Furthermore, when doing a project away from home, it's a hassle to pack up and lug all the compressor accoutrements. So, I've always been a big proponent of electric nailers to "fill the gap" to provide the ability to drive nails small to medium brads (1/2" up to 1-1/4") and not have to haul around the compressor, etc. When my latest electric nailer died, the only replacement I could find locally was limited to 5/8" nails/staples--not the right range for my needs.So I searched online and found this one. I compared it to features generally available on electric stapler/nailers in this "bracket" and found this to be a solid match, at a lower price. I received it a few days ago, and have only had a chance to test it. But compared to my old one, I already like the ability to adjust the power, the side-load magazine that will be easy to clear if it gets jammed, and the range of brads it can work with (5/8"-1-1/4"). Obviously, time will tell, but it looks to be a solid product at a good price.