Motorcycle Fender Eliminator Compatible with 2025 2024 2023 2022 2021 2020 2019 ZX-6R 636, Tail Tidy Fit for ZX-6R 636 2019-2025 Fender Eliminator Bracket

Fit my 2025 ZX-6R. Was a little challenging to install with the spacers, but all the hardware was included, decent quality (I'm still using this on my bike now after 6 months). It looks pretty good and is very functional if you take the time to relocate your turn signals. The thickness did make it a little hard to break the tabs off, but using a screw driver to twist it around helped a ton.

Super easy install and appears to be a quality part. Way more cost effective than a $$$ eliminator and maintains all the stock rear signals and lighting on a 25 ZX6R. Really cannot go wrong with this product.

Saw the other reviews for installing on ZX-4R so decided to take a chance. Just like the others, I went to home depot and got longer bolts the same width as the ones the came with the bracket. Bought 4 nylon spaces and washers with a 5 pack of longer bolts for $6. Brought 1 bolt with me just to make sure the washers and bolt width matched up. When installing, i removed the OEM tag bracket and lined up the top holes (closest to tag light) on the new bracket and used a pencil to mark where I needed to drill the 2 new lower holes and where to bore out one of the top holes to line it up. Drilled the holes and made sure everything fit. Then I disassembled the OEM tag bracket and reused the original tag light and blinkers. Everything lined up perfectly, couldn't be happier. The previous ZX4R review had pictures of bolts and nylon spacers which helped tremendously while searching a general size for the spacers at home depot.

This works very well. The downside, is during the installation process. Getting all four bolts in with all the washer and spaces at one time if you are by yourself, sucks! I placed the two back ones in slightly, then used needle nose pliers to place the spacers in place. Be careful not to drop the small washers and nut during this time 😅 best to have help lol! Otherwise, GREAT Product for the price.

Super easy install, the instructions that come with it are too involved and have you removing body panels that don’t need to be. Only slight annoyance was having to file down the tabs left once you remove the tab meant for aftermarket turn signals. Overall well built and worth the money. Just remember not to confuse the left and right turn signals like I did !

I actually bought this for my ZX4RR. No, it was not a direct fit. Yes, i knew that going in. But it’s the only tail tide available via “prime” that wasnt a month out from china nor a piece of steel/crap for the ZX4RR. This is very high quality aluminum and a beautiful finish. It accepts the turn signals by removing the tabs that are meant to be removed for the stock signals or it also accepts standard 8mm signals without removing them, and the plate light mounts perfectly as well. I wallowed out the rear holes ever so slightly wider, drilled two new ones, and used different, longer, nylon spacers (which you have to anyways) than the aluminum ones that come with it, as well as longer bolts with washers and nylock nuts for an absolutely perfect fit for the ZX4RR. The turn signals are a little closer than the tidies designated fore the ZX4RR which i also love, keeping things tight but still keeping clear definition for drivers behind you, but not looking stupidly wide like the ones for the ZX4RR. It could not have come out more perfect. This was also 1/2 to 1/3 of the price of the ZX4RR tail-tidies available and i spent $4 on hardware to make it happen.

Easy to install and all hardware was included. Surprisingly good value. Makes my ZX6R look much better.

Good product. Looks good, somewhat easy to install too. Good quality material.