M&P USA 1997-2012 Strut Bypass Delete Kit for GM MagneRide Cars, Corvette | C5 and C6, CTS-V, STS, XLR: not for trucks or SUVs, check the fitment chart photo for your exact car

Works on t45 suspension, 2001 c5 magna ride. Bought two sets and they both do their job perfectly. Got rid of the service light and let the car go over 80 again. Don’t waste your money on $200 dummy plugs

After trying some other kits, that all burned up. Talked to M&P and he was very confident his would not have that problem. Parts are much higher watt capacity than other kits, and he was right. The plugs fit perfectly on my fronts and needed very minor mod for the rears. See my pics. GM uses a lil different plugs in different models so not a big deal at all. Or you could just order his custom pigtail adapters. Well made and easy to install. I did overkill and taped everything up as well as zip tied. These resistors FIXED the service ride control message, and 80mph limit message. Note, for this car you need the full kits, resistors for struts AND resistors for the ride height sensors. M&P was easy to communicate with and made sure i had what I needed. Great kits and great support. 2007 Cadillac XLR

The item advertised looks nothing like the item I received. I believe this item is way over priced! I only purchased this because it looked like a small plastic connector type plug, something like a usb size connection and I thought it would like nice and clean under the hood of a Cadillac. This item in my photograph looks just like one of those cheap resistors you can pick up on eBay for a few dollars and it’s wrapped with shrink wrap to make it look clean but the truth is that it looks homemade. If I would’ve known it wasn’t going to look like the picture I would’ve just made this myself and saved some money. The connection is not even the same as Cadillac, I ended up having to order the adaptor and I still had to splice the wires. So this was not plug and play for a 2010 Escalade and unfortunately I have to cut the wires on the vehicle which I was trying to avoid and was basically the purpose of buying this kit. I was looking for a clean quality oem looking plug and play kit, this is not it. I do not recommend this product.

Cleared "Service Suspension" message and 80 MPH speed restriction. I replaced my front Magneride Suspension and rear air suspension with passive struts, requiring a bypass of the sensors. I ordered two sets of these and one set of the universal pigtail adapters. (Mentioned in the sellers product description). The rear suspension sensors are "plug and play" and no crimping or cutting is required. The front suspension sensors on my vehicle required me ordering the pigtails, as the front sensor is not a direct fit. Easy enough. I spliced the adapters in with no issue. I reached out to the seller with a couple of questions before ordering a second set of these sensors and spoke with Adam. This was one of the best customer service experiences I have ever had with any Amazon seller. If you order this product and have any questions about installation or fitment, these folks go out of their way to help resolve any problems.

I installed these tonight and only one of them works. Switched them side to side to make sure it wasn't a bad install and switched sides on my computer.

I would have loved for this to have been a plug and play solution for my suspension error issues. My mechanic failed to check if this would have fit first, and I had to return My 2002 Caddilac Seville STS (with Magnaride) has a different connection type. USE CAUTION when ordering. This company does mention this will work with MOST magnaride suspensions BUT NOT ALL. They also offer an additional kit for you to convert your particular connector to work with this delete kit, but I cannot install it. I am disabled. Also, my mechanic doesn't want to mess with the wiring to make this solution work. AGAIN, I would have loved it. My return was not the fault of the company. They sent the item fast and included all the "stuff" mentioned in the listing.

Looks good, I am impressed by their videos and their contribution to good DIY solutions! But I have'nt dared to try it yet. I suspect I will not work on my Seville 1993, maybe I was a little happy on the trigger. If anyone can tell me that it sure works, maybe with another pigtail, please shout out. Maybe M&P themself...? That would be sweet :)

These are exact fit for front struts on 05 corvette. However to work with the rears you have to cut the piece of plastic from the middle of the inside of the plug. Very easy to do and work flawlessly after. EVERY OTHER COMPANY WANTS 3-400 DOLLARS. Be smart buy these

This product will solve your Check Suspension & Speed Limited issue resulting from magnetic strut fails or replacements Our car is a 2006 Buick Lucerne CXS V8 and instantaneously the suspension system error message disappeared and the full potential of the Northstar V8 unleashed. On our car we had to use the adapter kit pigtails but this was an easy splice into the original connector. This is an amazing product and support was even better. You can't go wrong purchasing this for your suspension woes. Don't worry about replacing the ridiculously expensive magnetic system with traditional passive struts, combined with this your car will perform as intended.

Super easy installation and my service suspension message disappeared as soon as I clipped these bad boys in on my Cadillac DTS. Support from seller was amazing. I had a few questions after installation and I reached out to the seller via Facebook and they replied and answered all my questions in great detail.

لا انصح بشرائه ابدا ... منتج غير واضح .. مازلت رسالة العطل مضاءة

GOOD PRODUCT WORKS WELL

En los frontales plug and play los traseros requieren adaoatador