Fat Daddio'sPOBCC-9133 Anodized Aluminum Sheet Cake Pan with Removable Bottom, 9 x 13 x 3 inch

Anyone who needs to bake large cheesecakes from time to time should buy these pans. I recently bought two of them to make cheesecakes for an after-rehearsal party, and I was delighted with the results. I felt some trepidation about using these pans for the first time when I was cooking for a very special occasion and hadn't made a cheesecake of this size before, but I needn't have worried. The cheesecakes came out very lightly browned on top, with no cracking, and were firm but not tough--and absolutely delicious.I credit the pans with providing even distribution of heat and a convenient way of removing these very large cakes because of the double bottom with a large, round opening in the outer bottom that allowed the inside bottom to be pushed up by reaching through the opening. I was also pleased to see that there was no leakage of the filling from the bottoms of the pans.NOTE: It's a good idea to have someone else on hand to help hold the cake steady in this process, at least when you are first learning how to use the pans, because the cakes will be heavy.I made a New York style cheesecake with a recipe I developed for my own use. In general I would say that a recipe that calls for a little bit of flour seems to be less likely to split than other recipes. For each pan I doubled a recipe that I normally use for a full 10-inch cheesecake. I also used a box of graham crackers for the crust, which I put on the bottom only. If you want to add a crust an inch up the sides, as some recipes specify, you would need more graham crackers. However, because this cake will be cut in squares and only some portions would have crust on the sides, I chose not to bother--and no one complained.I baked my cheesecake in a 350-degree oven in a water bath (with the bottom and sides of the cheesecake pan wrapped in foil) for about an hour and 20 minutes. (Consult recipe books and/or online recipe sources if you aren't familiar with a water bath.) I checked for doneness after an hour and then added about 20 minutes because the cheesecake seemed too sloshy in the middle to finish cooking if I had cut the oven off then. (Remember, though, that the timing will be different depending on individual ovens and recipes.)After I turned the oven off, I opened the oven door half way and let the cheesecake temperature ease down for 30 minutes. I then removed it from the oven and placed it on a rack to cool further. I also used a metal spatula to ease around the edges to be sure that the cheesecake was released from the pan. After the cheesecakes had cooled down but were still warm, I placed them in the refrigerator-- in the pan, foil on the top of the pan--to cool overnight (actually more, in my case.)For best results cheesecakes should be thoroughly chilled before they are sliced, both to mellow the taste and to make them more sliceable. And it wouldn't hurt to use the spatula again around the edges just before removing the cheesecake from the pan. Some sources also recommend dipping a cake knife in water right before each slice and then wiping it after each slice to keep the slicing neat.All of these precautions seemed to pay off because there was not even a hint of a crack on the tops of my cheesecakes, which means that they made an attractive presentation. These pans provided the perfect hardware for my baking needs; of course that must also be accompanied by a tasty recipe, a reliable oven, and a cook with some basic knowledge of cheesecakes.

I like Daddio products and this was no exception. The 9x13 pan is great for baking a cheesecake. I am able to cut it into 1x1 inch bites, which is great for serving a crowd. The cheesecake bakes very well and easily comes out of the pan.

These pans are WONDERFUL. When I make my lemon bars and pecan bars I need a pan that will let me remove the entire 9x13” bars out in one piece in order to cut it instead of trying to reach down into the pan to cut the bars. To make these pans work best I always first spray and wipe down the insides of the pan and also the flat bottom. Then I spray and wipe down one (1) parchment sheet that I fit into the pan making sure that the paper comes up at least an inch all around the outside of the pan. Because both the pan and the paper have been wiped down with the vegetable spray the cooked item will cut easily and lift off the parchment once cooked and make cleanup much easier. TO REMOVE THE INNER COOKED BARS I invert a bowl that is smaller in diameter than the hole in the 9x13 pan and I place it on a cookie rack. Then once the cooked item has been removed from the oven I set the pan on the inverted bowl. This allows the smaller inverted bowl to push up the flat part of the pan so it can be removed and set on another cookie rack to cool. Love these pans.A+++

It was not quite as easy to remove the removable bottom and the cheesecake from the pan as I had hoped. Holding the pan and lifting the cheesecake out at the same time was a bit of a juggling act for me, although the end result was good. I can say the same for the bar cookies that I made in the pan. I have to admit, though, that cutting the goodies into serving-sized pieces is much, much easier when they are removed from the pan, so I am glad for having made the purchase.Maybe lining the pan with parchment paper would facilitate removal from the pan in the future.

This Pan is awesome. Easy to get cakes and brownies out. Sturdy Pan.

Have been buying different shapes of these pans for awhile now! LOVE THEM! They all bake evenly and in less time.

This is a Nice Cheesecake Pan, "Fat Daddio's Anodized Aluminum Sheet Cheesecake Pan with Removable Bottom" I don't use it for Cheesecakes but to Build Ice Cream Cakes, that's why I wanted the removable Bottom because it is a lot Easier to Remove the Cake from the Pan once its Frozen. I also like to make Tiramisu Cakes, I use a regular Pan, same size to Bake the Cake, once the Cake is Baked and Cooled I sliced it in three layers and I Build the Cake inside the Removable Bottom Pan each layer with Coffee Whipping Cream, Coffee Syrup, Cocoa and Rum, no Raw Eggs in my Tiramisu. I do the same for my Frozen Cakes with different Flavor of Ice Creams and many others Layer Cream Cakes. If I were to use the Cheesecake Pans in a water bath I would make sure to wrapped them with Heavy Aluminum Foil, you don't want any water to Leak inside the Pan, although if I make a Cheesecake I would use a Springform PanFat Daddio's Cheese Cake Pans never get to see the Oven at my House, since I only use them to Build Cakes. These Pans Feel Solid and not very Heavy, Fat Daddio's Cheesecake Pans are Made in China, the only problem I have with them is that they have Round Corners and I wish they Were Straight in the 4 Corners, it would make for a Better Looking Cake instead of having each Cake Corner all Squashed in, I'll take what ever I can get, Big Removable Bottom Square Pans are Hard to Find especially 3 inches High, I also wish they would make them 4 inches High as well. I don't like to use the Dishwasher on these Pans, I like to wash them by hand because that way my Pans will look Good for a Long Time. The Pans arrived Fast and in Excellent Shape, I was very surprised there were no Scratches or Dents! ...Thank You D.D.

I lined the bottom of my pan with parchment paper.. Taking out cheesecake bars has never been easier. Products was Easy to use. Easy to clean. Love it!

I make a lot of goodies for family members, including grandkids, and was dismayed at how even using parchment slings wasn't preventing the baked goods from cracking when being lifted out of the pan. Someone recommended I try Fat Daddio's bakeware, and this is the probably the best thing I ever bought for my kitchen. So I got one for my daughter as well.

Although I went through some ordeal with correct product, the end result was a pleasant surprise. The pan is the only one of it's kind that I have been able to find. It is professional quality as advertised and is perfect for cheese cake, or any other difficult to remove bar.