16.55" 2 Holes Spoiler Light LED 3rd Brake Light

Mazda uses black for ground (neg) and green with a yellow tracer for the brake light wire. I measured the bolt hole positions and new it would be close but that I might have to trim it to make it fit but it seems like a lot of these are parts bin lights and this one fits.

GOOD product.High quality

Despite looking as though it would fit perfectly, this was juuust a little off. I pared down each end maybe 1/4 in and expanded the hole so the screws would catch, then all went well. Lights up like brand new. Oh. I would advise taking the spoiler off to do this replacement. There are 4 hex screws you can easily find; you’ll need an extension for the far left / right ones. In fact I don’t think it’s possible to get the he wiring correctly placed unless the spoiler is off.

Toyota wants ~$260 for an OEM light (part # 81570-06060). This was worth the gamble.The shape of the light is exactly correct for my 2005 Toyota Sequoia. The original light had 36 LEDs so this is a perfect replacement.Modifications:The screw mounts were too deep for the spoiler. See pics. I used a forstner bit to shave it down but you can use a die grinder, or Dremel or whatever. That cut off the screw hole so I drilled a hole in the plugs for the screw mounts. I used some fender washers to lessen the pressure on those little plugs.Also, there's a little nub where the wire protector comes out the back of the light. The nub wouldn't fit through the wire hole in the spoiler. I took some pliers and carefully broke off the nub and filled the hole with E6000. Silicone or RTV would work just fine as a sealer.Once installed with some solder-shrinks to create a watertight connection for the wires, everything worked great.Based on the OEM part number, this should work for:2001-2007 Sequoia1999-2003 Solara

The spoiler brake light bar was down to about 5 bulbs working and needed replaced bad. This was an after market spoiler and I figured no way would I ever find a replacement. After measuring it and comparing bought it and it fit perfect. Nice and bright again ! So glad this works and so ez to install.

I bought this to replace the led light on the car trunk spoiler. They work great, now all the lights come on instead of only half.

I have been searching everywhere for this led brake lamp. Spoiler manufacturer doesn't offer a replacement. All other lamps I found, the measurements were not right. I was down to 4 or 5 leds still working. This lamp wires right up and fits like original!! Thank you 😊

The light for rear spoiler the customer very happy