AC Infinity, AIRPLATE S2 Home Theater and AV Cabinet Fan 6"

This thing rocks! I needed something to cool my new home theater rack with a glass door. It is now much warmer inside the unit than the previous "monster" rack I had with open shelves. I looked quite a bit but kept finding all kinds of fans for computers. I needed one like this that didn't need me to wire anything and I could plug into the wall. An added bonus to me is the thermostat controller. I didn't do anything fancy. I just drove a couple of finishing nails into the back of the shelf above my receiver and hung the fan assembly on the nails. The package does come with nice plastic templates to cut precise holes for the fan assembly and the thermostat if you want to mount them in a totally enclosed cabinet. Mine has open shelves in the back, I just wanted to move some air. The USB cord between the fans and the thermostat is long enough that I could place the thermostat controller on the top shelf next to my Monster Power supply with some leftover. The power cord from the thermostat with the little brick or wall mushroom is long enough to make it to the wall outlet with no problem. I set the thermostat controller on the shelf and it looks fine. There is a temperature probe wire attached to it that I hung down the front of the shelves to measure the temperature inside the cabinet. The first time I used it while watching a movie, I was not satisfied with the amount of cooling. Reason, I had the fans blowing into the cabinet over the receiver. This was maybe cooling the receiver like I wanted but it was just blowing a lot of hot air up over the rest of the electronics stack. I pulled the fan housing off the nails, turned it around and hung it back on the nails in the opposite direction to exhaust the hot air off the receiver out the back of the cabinet. That did the trick. I was able to set the temperature down to 76 degrees (my choice for now) and it easily holds that temperature. The temperature probe by the way is hanging just above the receiver. I am confident that it is being cooled like I want now. I've watched 4 or 5 movies since installing this unit and it does not make any perceptible noise when my home theater is blasting away. It maintains the set temperature steady as a rock! I keep it running after I finish watching the movie to allow the unit to cool down after I shut everything down and the fans are very quiet. Then I just have to unplug it from the wall. I am very satisfied. This thing was easy to set up, cools adequately and is quiet. The thermostat controller does have 2 USB ports so that you can add up to two more fans if you need more cooling power. I have had no problems with this quality product. If I do decide I need another fan, I would not hesitate to order another one.

I installed these with relative ease, including a 2 fan expansion for the other cabinet AC Infinity AI-CFD120BA Dual 120 Quiet Cabinet Fan, Black , for 4 fans total. The control unit is simple to operate. So far the performance seems to be good enough but the noise is troublesome. At low and medium, both pair of fans have a bit of a rattle, grinding sound. At high all you hear is the purr of the air (which is still quite loud). I've built PCs before and fans should not sound like this, especially at low speed. I couldn't put the thermal sensor directly over the hottest part of my amp, as it would reflect a higher temp than the ambient air and constantly run on high ("smart mode"), so probe placement is important. My entertainment center is very much enclosed, so I feel like the performance is a bit hindered without an intake. It seems like it has to run a little harder than I expected to keep the temp around 75, even without pushing my amp. I have an Onkyo receiver, XBox, AppleTV, modem, and router in one cabinet (with the probe). A DirecTV box, bluray player, and XBox Kinect in the other. In all, I'm somewhat satisfied, but am left wishing for a quieter system that doesn't have to run as hard. With quieter fans, I'd rate 4.5 stars. *****UPDATE March 2, 2015***** AC Infinity has just shown some of the most incredible customer service I've received in many years. After posting my initial 3 star review on Amazon, I was contacted (within just a couple of days) with information that they had discovered a hardware bug in the thermostat controller that is the cause of the grinding fan noise, and that they have the updated model rolling out of the factory. They immediately shipped me one priority mail, which I installed today when I got back from my vacation. I am pleased to report that the low/medium speed fan noise is resolved and the only noise I now hear is the whir of the moving air. It sounds exactly as I would expect it now. As a bonus, the back-light on the display (which was always on even if the system was idle, and is quite bright) now has a timeout function. Although I didn't note this as an annoyance in my original review, after having it for a while, the bright light at night was a bit distracting. This product improvement is just another example of a company paying attention to what reviewers have to say about their products and making it right. Oh, and Jeremy with AC infinity sent a letter with the replacement apologizing for the inconvenience and also left me a voice mail while I was on vacation asking how the updated unit worked. I think that's pretty incredible in this day and age. Needless to say, I'm updating my review to 5 stars.

This works great. It’s easy to install. Everything is high-quality, including the supplies they give you with it even the templates are sturdy and not made out of paper, but made out of plastic, which is really thoughtful. The fans run super quiet. The temperature control is incredibly responsive. The configurations for the control panel are so easy to use. This is the best product I purchased in a while.

AC Infinity has always done right by me and this is no exception. I bought this fan because I installed a mini fridge in a kitchen cabinet. I had drilled out some ventilation holes but they weren't doing enough to get the fridge to work properly. I installed this fan and it did the trick. The quality of their products is second to none. Even the packaging gives you a feeling of quality and it's just cardboard. The product itself looks great and works just as described. It comes with a template to cut out any of the wall or cabinet where you are installing it. The fans run ultra quiet and are very smooth. It comes with a USB or power adapter. I opted for the power adapter to make sure that it was getting the correct amount of power to make sure that it was working as it needed to. I have the fan on high and you can't hear it at all. Moves plenty enough air for my needs. There aren't any cons to this product. The price is extremely reasonable so don't even bother looking anywhere else.

Installation was straightforward. I used this to vent my gaming computer out of the side of my desk in order to reduce the amount of hot air blowing on me from the computer. I used an oscillating tool/saw to cut the hole out of my office desk. A few things: The CFM is just okay, but the fan is quiet. There are some weird harmonics the fan puts out, which are mostly not noticeable when the computer is running. I plugged mine into the back of my PC and set my BIOS to de-energize the USB ports when the computer is in "soft off" mode. This way, the fan only runs when the computer is on. All in all, it does measurably reduce the temperature of the area at the front of my desk where my arms are placed while gaming. It's only a few degrees, but the perceived cooling of cooler air passing over me is by far the most noticeable part. It's built well; the quality is good.

I've been using the AC Infinity cooling fan system for a while now, and overall, I'm impressed with its performance. The ultra-quiet operation is definitely a highlight - it's perfect for my home theater setup. The multi-speed controllers are also a great feature, allowing me to customize airflow and noise levels. However, I did expect a bit more power from the units for faster cooling. While they do a great job of keeping things cool, I found that they didn't quite match my expectations in terms of speed. That being said, I understand that more powerful fans often come with a trade-off in terms of noise. Despite this, I'm still happy with my purchase. The build quality is excellent, and the fans are durable and reliable. If you're looking for a quiet and effective cooling solution, I'd definitely recommend checking out AC Infinity. Also there support teannis amazing, I contacted them and asked them alot of questions from specs, to my cabinet design and size of which they recommended these.

5 stars to start. Looks great and professional Easy install. Comes with all needed hardware for thruhole mount or wood screw mount. Comes with a clear template/gasket to trace the necessary opening. Instructions state to reverse airflow, you need to disassemble and flip the fan around. It would be nice to reverse with a switch, but probably based on the fan electronics. VERY quiet. We shall see about durability. Overall it’s a great solution instead of buying all the pieces yourself and building it.

Attention Tent Owners This is my third AC infinity product. I have previous purchased two ac infinity intake/outtake exhaust fans which btw are great and still in use one year later. My purchase: Ac infinity dual fan wallplate/airplate with the switch non-controller version. My application: pull cool air from the room into a 3x3 to keep the plants inside at optimal temps. Normally temps inside are acceptable at 80-82 degrees, but in flower I want to get several degrees lower to simulate fall/harvest. Why I needed it? I use an LED that at its highest settings putting off quite a bit of heat into a small space and although a great LED, too big for the space (bigger isn’t always better) so I was having difficulty dialing in temps even in my mostly automated small space. Full disclosure - I’ve purchased more than my fair share of fans over the years from amazon and other big box retailers. Some I still use, some shelved, others recycled or returned. Rather than setup a proper intake using another ac infinity intake I went ahead and tried fan after fan propped against the side of the tent with the flap open to force cool air in. Btw the inexpensive Amazon basic floor fan pushes a lot of air, but I digress. And This method works, but adds additional noise and light leakage both in and out of the tent (night/day). As you know, this is a problem and will result in confused plants or worse, herms. That said, I’m still lazy, seeking the easiest cheapest way and I’ve been so pleased with my other ac infinity products (I decided on this unit after measuring my tents side mesh window which was close enough) it was an easy decision to take a flyer on this dual fan airplate. This fits my 3x3 bottom mesh vent exceptionally well. I didn’t even have to use the included screws or zip ties that’s how snug it is. Perfect even. I simply used a boxcutter to cut out the mess in my tent and forcefully pushed the plate into place. This admittedly took some extra elbow grease, but once i got it in, I’d say its the middle cup of porridge, just right. This airplate on its highest setting I am able to keep my homes air set to 70-73 and allow for cool fresh air to enter the airplate/tent and force the hot air generated from my LED out of the top. My ac infinity outtake fan is pulling that hot air set on low with a controller (setting 2) through an oversized filter from another company to filter any smell (none) back into this spare bedroom. Added some pics. I opted to go with the non-controller version of the dual fan airplate as I have two other intake/outtake fans (ac infinity) with the controllers and thought it would be overkill. The airplate has a small switch on it with 4 settings. Off, low, medium & high. On high, it’s quiet and mostly unnoticeable and pushes enough air into tent to keep the perfect temps! Surprised me for an airplate that it was able to push as much air in as it does. Pros -perfect size for my application -quiet even on its highest setting -always on feature (using a smart app controlled outlet to turn off and on) -moves more air than expected -great engineering as usual Cons Not sure it’s a con, but it would have been better in white rather than black and without the controller I don’t know if it was possible to push even more air in on possibly higher settings. White was unavailable. That’s it, hope this helped some folks. Thank you AC Infinity