SMARTSTANDARD 6.6FT Barn Door Hardware kit, Barn Door Track, Sliding Door Hardware kit, Smoothly and Quietly -Heavy Duty Sturdy -Easy to Install, Fit 36"-40" Wide Panel (I Shape Hanger)

I needed a rail to mount the re-purposed (very heavy) front door for a basement bedroom. I was pleased to find this inexpensive hardware that was delivered promptly, and is very sturdy. Mounting was simple, even though I had to install a wooded mounting board since the studs were not in the "right place" for the mounting hardware. My door rolls very smoothly, and looks great. Note: I did not want to cut a "slice" in the bottom of this door so I purchased a wall mounted roller (also on amazon) to control the door's range of "swing". I would buy again if I can find another barn door application in my house.

I have used two of these now and they work perfectly! Very easy to assemble and slides nice every time. We built our own doors and the hardware attaches easily to those as well.

I LOVE THIS! I purchased 2 rails, from different companies prior to purchasing this one. This is the only one that came in one solid piece. In rebuke quality, super heavy duty and will hold my mirror incredibly well!

This is a must item for me. It was easy to install, no frustrating instructions. I love the heaviness and look.

I was happy to find a good quality Barn Door system for such a great price. There are a lot of reviews here, but I'd like to take my review time to talk mostly about safety. The door I hung was about 80 pounds with the hardware installed, so no way I want it to derail!First, the door stops are good, but as you follow the instructions, the stop on the short side of the rail relies completely in the stop to stay the door on track. The two set screws are good, but for safety I'd suggest you put a screw right into the track, close to the end, to ensure the stop cannot work loose and let the door slide off the track.Second, the Rubber Ends in the kit, I believe, are intended to keep the rollers from lifting off the track. Not clear in the instructions, but in my case one of the stops was not thick enough to prevent the roller from popping off. I inserted a 3/8 inch washer under the stop, and now if I lift up on either side of the door, the roller won't lift off the track. Test your door! Lift up and make sure the the Rubber End keeps in from lifting off the track.Third, the saw kerf Floor Glide provided is hard to install and isn't very secure unless installed perfectly. I'd suggest buying one of the roller style of door bottoms from Amazon. Looks better and keeps the door well secured "in and out" wise for safety and it is much easier to install. Cutting a kerf in the bottom of a door isn't that easy.Last, install a sturdy header board. Unlikely the holes in the track are going to align with your studs, and you need studs for a heavy door. Even a lighter door creates a lot of dynamic load. So, use at least a 1x6 header screwed into the studs, and then lag your track into that header to make sure the door doesn't find it's way onto your head someday.This is a very nicely made, sturdy unit, but take a bit of extra care for safety.

Excellent Product, easy directions for installation. I built my own door in my newly remodeled room.Strong and looks very durable.

This is a high quality product and strong. The steel rails are heavy and the rollers are smooth as butter. I had to make my own door. It is 72” by 43 1/2” and it worked perfectly and it rolls with a slight touch. My package did not have the connector for connecting the rails to hang them. I found you do not need it. The rails are heavy so I just found where I wanted to put them and put a small line to mark the location. I then used a four foot level to mark along my header where I wanted them. I then put one of the rails up along my lines and marked the holes. I then drilled small holes and then used the lag screws to temporarily hold up one section, just putting the stew in the header to hold the rail securely . I was then able to put the other section up and lock them together. I did not realize that where the two rails lock together there is a hole for a lag screw that holds these 2 rails together, very good design. I then marked the holes for the second section and drilled the holes. Then I just took it down and put up each section with the spacers and made sure it was all level as I tightened everything down.I also ordered a handle and bottom door roller from Amazon. The one included would not work with my carpet and concrete floor, easier to order something better and with the price of this great product it is no problem and still a fantastic bargain.

Did a build out in our office. Wanted to find a way to utilize the closet with an updated look. We ordered the kit for the door we made. It was easy to assemble and it added the extra little touch we needed. Highly recommend anyone who has a door or can build their own door to order this Kit. They cut our cost down 3/4 of what it normally would be if you ordered everything together.