JOYO5.8Ghz Wireless XLR Microphone Transmitter Receiver Plug-on Mic Adapter 4 Channels Wireless Microphone System for Dynamic Microphones PA System and Audio Mixer DSLR Camera (MW-1)

A decent unit that sounds good and has great reception during use.However, I find the 48V phantom power provided adds signal noise to my condensor mic (Blue Encore 300) -- I think it's a little underpowered.It is not as heavy as the MW-1 (more plastic used), but I don't think that necessarily makes it less durable (... besides, I have a MW-1 that I unfortunately dropped a couple times, that no longer works).

Why did you pick this product vs others?:I had another Deejay give another recommendation for for a similar product that I chose this product, I ended up using it for a wedding and it worked perfect no feedback and it lasted for hours. The wedding was like five hours and I had no issues. I highly recommend this product is half the price of most of them on Amazon and it works the same as the ones that are like $200.

Wireless microphone adapter was tested with Mackie 1202-VZL3, Sure SM58 and SM57 with Rockit speaker as well as external amplifier and speakers. It was tested in both smaller room as well as at a distance around 50 ft.Design: Design is circular with short antenna and two buttons, power and channel. Charging port for internal battery is micro USB. Dual head micro USB cable included in the package. Device came charged to about 75%. Package in small box with foam slots, nice and simple.On a design, one issue and one suggestion. first for the issue. Diameter of the base that plug in to mixer a bit too big where two receivers can not be installed in adjacent ports. No issues with wired connectors in adjacent port. Second, suggestion, it would be nice to associate different color LED ring with different channels so you can instantly see what microphone belong to which channel. Would be easier to identify devices. Since I had only one test set, that wasn't an issue.Build quality:Made out of combination of plastic and what looks and feels like metal. Silver portion is metal, the rest looks like normal plastic without any coating. I like having no coatings as all of them deteriorate at some point.Operation:Once devices peered changing channel on one of them makes second move to the same channel, nice feature. Device didn't exhibit any drops and operated reliably throughout few hours of testing. Battery life was good and I didn't actually tested past few hours.Sound quality:Sound was fairly good with good dynamic range (microphone) but unfortunately it had some higher frequency noise. Noise could be lowered via 12.5KHz tone knob and I didn't test to see if any external interference could be attributing to it. Once you have somewhat noisy environment this would be hidden under the other noise but in quiet place you can definitely hear it.Value:I think it may be a decent value for money but if you need multiple channels and especially with smaller mixer where you need to utilize adjacent ports, it my become an issue. I decided to return it and will be looking for multichannel solution of something a bit smaller in diameter.

This product does everything promised. I use this with a Shure WH20 xlr wired headset mic with the receiver plugged into the mixer. I see no reason why it wouldn't give just as good results with other products. I use it for DJ/karaoke shows in bars and other venues. The range has been great. I have seen no obvious signal loss and no interference. The battery life is at least 5hr of continuous use. It is very easy to use making it almost plug and play.

I was concerned when another reviewer mentioned these lower the volume and add hiss.Also was concerned when the manufacturer stated it's not a good idea to use near 5.8 WiFi routers or other 5.8 devices.I used it at my home with a 5.8 router while also using a 5.8 wireless guitar system (Lekato WS-50).Also used at two gigs.It did reduce volume some but no more than my other wireless mic system. Maybe 2-3 db. Hiss was added due to increasing the gain on the mic channel but that didn't matter for my purpose. I'm using a Fisher Loudbox Performer amp. When inside a coffee house or moderate size room, my gain can be low enough where hiss isn't noticeable. If at a big indoor venue I'd be plugging into a larger sound system anyway. When playing outside events, where I need to turn the gain up quite a bit, the outside air noise covers any resulting hiss. I was really surprised when I did my 1st outdoor gig last weekend. I got in front of the amp, and, even knowing what I was listening for, could just barely hear hiss.Another reviewer mentioned this couldn't be used for recording in a studio because of hiss. I agree, but would never even consider going wireless while recording in my studio . The sound quality of this JOYO 5.8 system is closer to my cabled sound than any other system I've used. My ears don't hear a difference. (Same is true with the Lekato wireless guitar setup.) I also use a Clarke CM1 mic booster for my dynamic mic - Shure SM58. Only con (if I can call it that) is that I can't use my phantom powered condenser mics with this - it won't power them. But I prefer my shure SM58 dynamic for playing venues after noticing my condenser mics are so sensitive they bring in too much ambient noise (especially outside). Hope this review helps someone.

These are awesome great product and great quality I am a happy customer. Update; After a few uses I am experiencing cutouts. Starting to have second thoughts on these.

These are so great for cleaning up my performance space and making my footprint cleaner. I hated having wires everywhere. I still bring my cables with me, in case I misjudged or forgot to charge these. Makes my space look so much more professional and less intimidating as people come in to see me.

The receiving module refused to charge a year + after purchase. I went back to cables. And you will see there is no return instructions. Only useless "self help" garbage. Do not buy. No product support. If I hear from them I will revise my review.l