Gator ETX Soft Roll Up Truck Bed Tonneau Cover | 53311 | Fits 2008 - 2016 Ford F-250/350/450 Super Duty 6' 9" Bed (81")

Love this cover. Works great with my fifth wheel since it rolls up and stores securely. A hard top or foldable wouldn't work, I need the open space to pull my trailer. It was very easy to install, just needed a 1/2" socket and channel locks to secure the clamps. I installed mine on the loosest setting and haven't moved it since (summer) and haven't had an issue. Hopefully this will be fine in the winter.I would recommend moving the clamp closer to the tailgate than the directions show, simply to secure the end where you have to push down pretty hard to snap the cover down to close it. Other than that, the mount and cover went right in without an issue.Will definitely purchase from this manufacturer again!Update: Moving the last clamp closer to the tailgate didn't help in the end. After opening/closing the cover a few times, the rail slid down far enough where it wouldn't close properly. I ended up drilling a hole through the cover rail and truck steel where they come together. I added a 1/4" bolt (there isn't much room) with two flat washers, lock washer and nut to old the cover rail in place. So far this hasn't caused any issues.I believe the manufacturer notes there isn't any drilling (or some similar wording) required. This is correct, but you'll have to tighten the back left clamp after opening/closing the cover every few times.I stand by the above comment about purchasing again, the added work took maybe 5 minutes.

Highly recommend,I have a short bed ford with a fifth wheel hitch fits over it perfectly and I have room.easy to install and folds up nicely when I need to and strap hold it well while traveling.

First impressions are really good. I installed the cover myself in about 10 minutes. There are two clamps in the front, one on both sides and two in the rear.I'm not sure if water will creep into the bed but I don't carry items in the back of the truck that will be in there for long term. The cover bumps against the tail gate but this could be the aftermarket tailgate lid.I like that I can lock the tailgate and the clamps are inside the cover and not accessible from the outside. I was also able to flip the firestick mount around and the cover fits nicely over the rails with some rail exposed on either side.One downside to the cover is that the strap mounts I have on the rails are covered up but with the ability to pull the cover back and strap in place I don't see this being a big deal. Also with the cover being so easy to go on it wouldn't take long to remove if need be.

So far I love it.Got a new to me 2016 F250 and was not sure if I wanted to go ahead and get a full size cap like I used to have or try just a Tonneau Cover. At this price I decided to give it a shot.Install is crazy easy and can be done by one person easily.The front clips screw on very simply and the rear clips once adjusted once are easy to operate.Remember to fold the clips into the flat position (the way they arrive) before you fold it up so you do not damage the top.Front section does hold some water when it rains. The back 2 seem to shed the water off pretty well.It has a clean look and so far has kept the bed dry.It also comes with a Tailgate Seal that I have not installed yet and is a nice add on to help keep dirt, water, etc out of the tailgate.

Easy to follow instructions installed cover onto super duty pickup per instructions. End product was great although I feel like cover could have been and inch wider for the Velcro to contact the bed rails. I feel it’s a little hard to get square on frame. It could also be I’m picky. The cover serves it purpose and the price was right plus the warranty.

Very happy with fit, function, and quality.

I grabbed this to simply keep things in my bed dry in the rain. It seems to do that just fine. It's more of a universal fit, which is fine and to be expected, and it fits my 2006 F250 very well. There really isn't much more to be said to that end.Installation was super simple and took me about 5 minutes by myself. There are 4 "clamp" that you secure. 2 are semi-permanent and 2 are quick release to allow you to fold the tonneau. You just line up the cover the way you want it, fold it, clamp the semi-permanent clamps, unfold it, and finally secure the quick release clamps. No muss, no fuss.There's no discernible noise in the cab at any speed I've traveled upwards of 80ish. It's a diesel so your mileage may vary, but I'm pleased. It doesn't flap or anything that I noticed, either. All in all it seems to be secure and quiet.Now, I said secure. That's subjective. When I say that I mean it hasn't moved. It's a soft tonneau so there's no real security to be had when it comes to theft, but that's not why I got it. Assuming you can lock your tailgate you can keep honest people honest, but if they have a knife and want in they're in. Simple as that.Now, I received 2 of these. The first one was bent in transit and they (realtruck) replaced it fully. The damaged one had a bent rail where it covers the tailgate. It didn't really affect functionality overall, however it could have been more prone to leaking. I simply contacted the seller and they worked through the replacement process without any complaints from me. Had they said they wouldn't replace it would have been understandable, but they went above and beyond. The 2nd came in and is perfect.Overall I'm really really pleased.

Great cover very happy with it