V-MORO Compatible with Samsung Gear S3 Frontier Bands/Galaxy Watch 3 45mm/Galaxy Watch 46mm(2019),22mm Solid Stainless Steel Metal Business Bracelet Strap Black(Not for galaxy watch 4 classic 46mm)

Have been snagging a few 22mm bands for my OnePlus Watch 3 just so i can have some options for the occasion. I wanted something more traditional that matched the titanium and steel and saw this and gave it a shot. Install took a bit to figure out without guidance, but once i initially attached the band, found i had it attached in reverse (how the clamp closed) it got really easy from there. I re attached one side after removing the band, sat at my desk with the lage mouse pad it has and with the watch face down, band out you can see arrows on the removable link, pointing in the direction they need to push outward. I removed what i needed in equal amounts from both sides, saved the 2 bits and pins with the tool in the box, took all of 5 minutes at best. Looks and feels great, not too tight or loose. This band is gonna look nice with the right fit on more casual occasions. My daily driver is a mesh style magnet clasp that adjust on the fly, and makes it easy to tighten for monitoring. Good stuff here and not breaking the bank!

I like the black and silver option as black anodized bands tend to show wear within a year. Wight this two tone option, I expect that wear to be much less noticeable over time. The package includes a tool to adjust the band length to size which is easy to use and only took a few minutes to adjust to my smaller wrist. There are enough removable links to accommodate almost any size wrist.

great quality watch band and looks great too! easy to adjust the size of it with the supplied tool. for a metal band it if comfortable but does make your wrist sweat when its hot. compatibility for the gear s3 is perfect.

The rubber band that came with my S3 Frontier was uncomfortable so I was looking for a metal band as a replacement. I liked the look of this band and the latching mechanism. The finish on the band looked like it would match my S3 Frontier. When I received the band, it was simple to remove the old band and replace it with this one. There's a small "knob" that allows you to operate the spring mechanism on the original watch band and the new spring pins that come with the V-moro band have them, too. This is much easier than prying with a small blade or pin that older watches required. I put the watch on and realized that I had the band on backwards making the latch mechanism awkward to operate. With the "knobs" mentioned above, it was easy to remove and swap it. I put the band on again and found out it was HUGE! I ordered the regular size, I can't imagine how big the XL band would be, but better too big than too small. The kit included a small pin press with instructions for adding and removing links. It is plastic so I wasn't real sure whether it would work but it worked perfectly pushing the connecting pins out and pushing them back in. You have take care to keep the press aligned with the pin being pressed in or out. I recommend going slow and taking your time and think you'll find it easy enough to do. Also, in order to keep the latch centered, it's best to remove or add links in pairs (one on either side of the latch). It's more trouble but worth it. The finish (appears to be black anodized but I can't be sure) was a good match and with stainless steel construction, I expect it to last a long time. If the connection to the watch matched the rounded profile of watch, this would have been a five star review but I realize the band is probably made to be used on multiple models.

I know it's an outdated watch but the new ones just doesn't have the looks I like. So I will keep using until I can't. I had a rubber style band that after a while just stretched a little too much to the point where the next hole was too tight and the hole before is too loose. I decided to try a metal band for a few reasons; air flow, looks and adjustability. Band arrived and it was a breeze to remove links and attach to the watch. So far, I love the look and feel, no hair pulling and it fits comfortably on my wrist. Only negative is on me, I should have done this sooner as the watch show signs of use and the band is pristine. Overall, it works and gives the watch a nicer look.

I love how durable it is, and the quality is great. I'd recommend it and buy another color.

I'm pleasantly surprised by the high quality of this watch band, especially for the price! I've owned the Frontier S3 for a little over a year. Most of the time, I'd switch between a nice brown leather band and the rubber band that comes with the watch. When my leather band wore out, I bought another on Amazon. To my dismay, it was orangish, plasticky, and didn't look nice at all. In my frustration, I decided to order this metal band, which arrived within two days. From a looks standpoint, WOW! You'd think this shipped with the watch it's so nice looking. From what I can tell, the build quality is very good and it feels solid on my wrist. I've owned a number of nice metal watches in the past and this watch, with this band, feels as nice as any of them. As a lawyer, I wear suits almost every day and this watch band looks *sharp* with my black, grey, and even blue suits. The only minor setback is that the process of re-sizing the watch is a little complicated. It took about 15 frustrating minutes to figure out. The watch ships with a little tool that's essentially a screwdriver installed in a mini bench. As you rotate the knob on the bench, it moves the screwdriver toward or away from the watch. To remove links from the watch, you identify the link you want to remove, find the screw holding that link in place, *put the watch over the bench so that the screw lines up with the screwdriver, and then rotate the knob so the screwdriver pushes the screw out. By removing two screws, I was able to remove a few links and get it to the right size. Then you re-insert a screw to bring the watch band back together, then use the screwdriver tool again to push the screw back into place. It's a little complicated, but once you get the hang of it, it's not so bad. In total, I love the band so much that I forgive the learning curve on the tool to remove links. Very, very satisfied with this purchase.

Don't like rubber watch bands. This is my second one of these bands, the first I wore fire over a year and lost one of the retaing pins when cleaning. Decided to just purchase a whole new band instead of tracking down a replacement pin. Still using the first one, just took a pin from this replacement figured I'd save the new band for later as the first one still looks and functions great. This band easily installed on my S3. Was able to adjust the size to my wrist by removing a link with the supplied tools. If you have never worn a caneterlever clasp band before your in for a treat. They come on and off so easy, yet this one is as secure as a hook style band. I work hard out in the hot humid Florida sun, my work entails more than a fare share of manual labor in sandy muddy environment. I sweat alot. Many of my previous watch bands become pitted and weakend by my sweat, usually have to go with titanium watches and bands, stainless usually fails. However these bands and the S3 watch seem to not have that problem. I use a lot of impact tools with my hands, much of the time over water, this band has yet to come loose, if it did I'd likely loose the watch. The black finish after a year of hard work showes some wear but still not enough fro me to want to switch to the new band. I work hard, I demand my tools do the same, this band has done so.