IPOW Grow Tent Kit Complete System 2x2 ft with VS1000 Led Grow Light, 4 Inch 190CFM Inline Fan, Carbon Filter and 8ft Ducting Combo, 24" x 24" x 55"

This was a lot nicer than I thought it was going to be. The light is great and all of the mechanics inside worked well. It’s a good size for medium sized plants and was pretty easy to put together.

This product is a live saver. I've grow over the last few year out of this tent kit and i use it as my cloner station for all types of herbs and fruit and vegetables. I would recommend to be careful of over crowding seedlings as the set up makes most plants grow fairly quickly. Great product. There is Zero light leak and the quality of the tent is tough and robust.

Solid cost and easy to build with video instructions from Amazon. Decent size however lights are not the best size for the tent it is sold with zipper and peak thru windows are great and hold all light in

This is a great little setup for the first time grower such as myself. It contains literally everything you need to start growing except the seeds and the growing medium. It's very well constructed, with strong supports and durable fabric. There ducting, cable, and vent ports. The grow light is also included as well as a thermohygrometer. I read at least one review that mentioned the height of the grow light was not adjustable. That couldn't be further from the truth, in fact you are supplied with multiple ratchet style supports for both the grow light as well as accessories. This makes it easy to move the light up and down at various stages of growth. The included intake filter is probably big enough to filter your entire room let alone a small tent this size. The exhaust fan is powerful enough for a tent probably two or three times this size. In fact, I had to purchase a separate regulator to plug the fan into to cut the power in half otherwise it would literally suck the heat and community out of the tent faster than the machines could produce it! That being said, I do recommend only opening one of the two vent ports located on the bottom of two sides of the tent. This seems to have solved my issue. Obviously, I will not hold either the filter being more than adequate or the fan being a powerhouse (it's still Relatively quiet) against it. If anything that will just make it easier to upgrade should I choose. Overall I would highly recommend this grow tent setup as an all-in-one solution for first time growers. Especially if you're on a budget.

Well....I guess I should have measured out 4X4 the height is great and wasn't a concern. When I asked my girlfriend to help me setting it up and seen the size of it shocked her but I reassured her it was a good size. So far so good...only 4 weeks in growing and getting ready to put these girls in 10 gallon grow bags and start their bloom in a couple weeks. I do wish the ventilation fan had a control dial to adjust the airflow better.

I bought this tent when there was a $100 off coupon so I paid approximately $200. I am happy that I did not pay the full price, I don’t think it would have been worth it. The tent comes with most of everything you would need to start a grow minus soil so that is a plus. In the description it says the fan is noise free. This is definitely not the case, the fan is noisy and I will be contacting the seller directly regarding this issue. If noise is not an issue than it seems to function fine-as it stands I will have to buy another fan. Quality of tent material is good. Final thought: it’s a good start for growing, just be aware that the fan is very loud and not necessarily worth full price.

I am happy with the grow tent so far and have made some adjustments to my setup. Please see the attached picture to get an idea of my current setup. Added a Mars Hydro TS1000 Growlight To increase the humidity within the tent, I added a humidifier. For heating, I am using 1 corded light socket with a ceramic heat bulb. Each heat bulb uses 150w and can heat the tent to 90+ degrees if needed in my 65-degree utility space. These are the same light bulbs someone might use for a reptile tank. I am using a humidity/temperature controller instead of the thermometer/hygrometer that was provided. This allows me to monitor the temperature and humidity and also automatically adjust my heating and humidity without any action on my part. To improve ventilation, I added another flexible duct on the opposite side of the inline vent/fan to vent the air out of my home. The vent 300w vent that was provided is a bit too powerful for the tent. I needed to buy a fan speed controller for a few dollars to lower the CFM. I bought a small fan to move the air around inside the tent. I am using a 6" clip-on fan, but a 4" fan would suffice. I am using a smart plug to control the light hours, but the timer that was provided is more than sufficient to get the job done. Here are my suggestions to make your kit even more attractive: Add a temperature/humidity controller that allows for a heat and humidity device to plug in. I recommend the DIGITEN DHTC-1011 but there are lower cost items that fit the bill. Add a simple 6" clip-on fan Add a surge protector Replace the current fan with a lower CFM fan or include a fan speed controller with the current fan Add heat bulbs and light sockets- Providing someone a way to heat their tent at 300w continuously is unbeatable.

Nice setup and well worth the money, only issue I have is the noise from the blower and the temp gauge instructions show that it originally came with a battery but the seller took it out and put a sticker on the front packaging saying the “button cell”(I guess that is the Chinese interpretation of small battery😆)is not included without anything to tell you what size battery to use, luckily I have a multi type battery pack from tractor supply and I used one of the L44 batteries that barely fit in the slot. Well worth the money

Besides the noise level being very obnoxious and not being controllable in any way, after 3 days it made a loud popping noise twice with about an hour interval, i plugged it out and in again but now its comoletely dead. 1 star for ease of assembly. Disappointed.

Der Propeller im abluftfilter hat sich bei erster Benutzung direkt gelöst und verklemmt dazu fing der Motor an stinkenden Rauch zu entwickeln. Ich finde es eine Frechheit das ich dieses Produkt weder reklamieren noch zurückschicken noch ersetzen lassen kann. Absoluter fehlkauf. Nicht weiter zu empfehlen.

Lüfter war nach einmal einschalten kaputt und ist in Rauch aufgegangen zeit schaltuhr war auch defekt!