Garmin Acc, Quick Power Adapter

So easy to instal...if you can't do it then its the user not the item that is at fault - its the same as plugging in...well a plug! Quality item with a snug and secure fit. It doesn't have to be used with a Garmin camera too but I have.

Bit expensive but works well. With 2 USB outlets it powers my dash cam and powers my phone while acting as my Navigator. Limited power so don't expect to fast charge a big smart phone but it will keep it topped up while its displaying your route. I was initially a bit concerned that equipment was staying on, but after careful checking once I remove keys from ignition and lock the car, it goes 10 mins before powering off. I managed to neatly hide the wires so overall I saved money vs a garage installing this.

I dislike the excessive price!! Not justifiable for what it is but it’s the only one recommended for my Garmin Mini 2 dash cam. Easy to plug into the OBD Port to provide the power you need when you switch on the ignition. Has 2 USB ports so you can charge or plug another device into it. Comes with a decent amount of power cable and a small double sided sticky pad that allows you to fix the body of the unit to a suitable place out of the way for a tidy out of the way install. You can also set it so it turns off with the ignition or remain on for 10 minutes in parking mode or 24 hours ( assume this is constant ) in parking mode, the instructions state that if set to 24 hours it will monitor your cars battery voltage and switch itself off of if the voltage discharges to a level that would mean the car wouldn’t start As I said it could be a lot cheaper and is, in my opinion very over priced for what it is but it does the job it’s designed to do.

Bought as a spare, works fine.

I purchased this unit as it was a Garmin product and I did not fancy purchasing one of those cheap £8 to £15 Chinese units. This unit has a switch that cuts the power to the dash camera after 10 minutes or another position after 24 hours of constant use to stop any chance the dash cam might leave you with a flat battery. The OBD unit has a censor that cuts the power when a pre set voltage has been reached so your car will start and not leave you stranded. Another feature with this unit if your car is rocked when it is switched off or hit the unit sends power again and records for another 10 minutes ( not tried when set on 24hour setting ). Just to be clear this unit will not work like a hard wiring kit and will not put the Dash cam into true parking mode (well it did not on mine anyway. Road Angel Ultra 4K). When the OBD unit is on it has a red constant light on it and flashes slowly when the set time is over and goes out if the battery voltage drops below the set level. Please look and see where your OBD port is and if you are able to plug this unit into it and still be able to replace covers etc, mine was underneath the passenger parcel shelf and fitted perfectly and can hardly be seen. The unit is working well and I am pleased with it so far, hope the extra cost rewards me with a long working life fingers crossed.

Investing in a dash cam is a wise decision for any vehicle owner. However, the installation process can sometimes be a hassle, especially when it comes to hardwiring the device. I actually delayed purchasing a dash cam, as I was unsure how to properly wire it - I din't want to use the cigarettes lighter socket, as I didn't want any cables obstructing the interior of my car. It is an incredibly useful piece of kit designed to allow for easy hardwiring of up to two USB devices- for example, you can connect 2 dash cams, front and rear. One of the main advantages is its convenience. There's no need to worry about fuse taps or finding suitable fuses to tap, making the installation process faster and hassle-free. While the price is higher compared to a traditional fuse tap solution, the convenience it offers makes it well worth the investment.

This way of powering front and rear Garmin cams is a bit of a secret, as I only stumbled across it by chance, rather than research. However it is a fantastic option - simple and discreet, while keeping messy cables from ruining the look of my tidy centre console (by avoiding using the cigar lighter at all). Fitting was very easy. I originally had resigned myself to using a Halfords fitting service to hardwire the cams to the fuse box, but that also meant when changing cars would need paying to remove or leave wires behind. But this little box plugs into a port under the steering wheel designed for interfacing with a diagnostic computer. The device gives the choice to keep powering the cams for 10mins, 24 hours or always, once the car is switched off. I leave it on 10 mins so never worry about it draining the battery, which apparently will never happen anyway as there is a sensor that stops the cams using power if the battery voltage falls below a set safe level. Thoroughly recommend for a tidy install.

I was looking to setup a dashcam in my car since I was involved in an accident in an underground carpark with no working cameras, making the claim harder to process. I wanted a camera small enough no to really notice and that wouldnt dangle in front of my stereo which a lot of them do. I found garmin made an OBD constant power cable and immediately looked into it. For what it is, its a lot of money but annoyingly it does offer a couple nice features and my car looks tidy because of it. It plugs straight into the OBD which most if not all cars 1996 and up should have, you can then choose 10mins, 24hrs, infinite time options. Personally I would have liked and hour but 10 minutes works fine for me as any longer will start to drain the cars battery. The parking guard does work fine which for garmin cameras at least needs this to function. the cable has two USB ports, one for the camera and another for whatever you like. I'm aware that connecting the camera straight to the fuses can be achieved but as someone who doesnt know cars or electrics that well, I wanted the easy choice. If you have a garmin dash cam, I'd recommend this along with it for a cleaner look, especially if you can get this in a sale. it comes with a standard cable which dangles and the longer one for going round the car.

Do jedneg USB mam podłączona kamerę, do drugieg GPS tracker. Ustawione na 10 min opóźnienie po wyłączeniu auta, pozwala to zapomnieć o ładowaniu baterii w urządzeniach. W razie wstrząsów w aucie, przywraca zasilanie na kolejne 10 minut :) / edit. Niestety po kilku miesiącach urządzenie przestaje trzymać ustawienia i kamerka działa cały czas po wyłączeniu auta, dopiero wypięcie i ponowne włożenie do OBD pomaga na chwilę. Już 2 urządzenie i oba mają to samo :(

Das Garmin Kabel für die Konstantstromquelle ist eine praktische und essenzielle Komponente, wenn es darum geht, Ihre Garmin Geräte dauerhaft mit Strom zu versorgen. Es ist besonders nützlich für Anwendungen, bei denen eine konstante Energiequelle benötigt wird, wie zum Beispiel für Dashcams oder GPS-Navigationssysteme in Fahrzeugen. Vorteile: Stabile Stromversorgung: Das Kabel sorgt dafür, dass Ihre Garmin Geräte eine gleichmäßige und zuverlässige Stromversorgung erhalten. Dies ist besonders wichtig für Geräte, die kontinuierlich betrieben werden, wie etwa Dashcams oder Navigationssysteme. Einfache Installation: Das Kabel ist so konzipiert, dass es einfach an Ihre Garmin Geräte angeschlossen werden kann. Es ermöglicht eine schnelle und unkomplizierte Integration in Ihr bestehendes Setup ohne komplizierte Installationsprozesse. Hochwertige Materialien: Garmin verwendet hochwertige Materialien für das Kabel, die für eine lange Lebensdauer und zuverlässige Leistung sorgen. Dies reduziert die Notwendigkeit für häufige Austausch und erhöht die Gesamtzuverlässigkeit des Systems. Kompatibilität: Das Kabel ist speziell für Garmin Geräte entwickelt und bietet daher eine optimale Passform und Kompatibilität. Dies gewährleistet, dass es perfekt mit Ihrem Garmin-Gerät zusammenarbeitet und alle erforderlichen Anschlussfunktionen bereitstellt. Erhöhte Flexibilität: Mit dem Kabel können Sie Ihre Garmin Geräte auch außerhalb von Fahrzeugbatterien oder temporären Stromquellen betreiben. Es bietet die Flexibilität, Ihre Geräte an eine feste Stromquelle anzuschließen, was besonders nützlich für den Einsatz in Fahrzeugen oder auf festen Installationen ist. Nachteile: Abhängigkeit von einer festen Stromquelle: Während das Kabel eine stabile Stromversorgung ermöglicht, ist es auf eine feste Stromquelle angewiesen. Das bedeutet, dass es nicht für mobile Anwendungen geeignet ist, bei denen eine kontinuierliche Verbindung zu einer festen Energiequelle nicht möglich ist. Längere Installationszeit bei komplexen Setups: In einigen Fällen, insbesondere bei komplexen Installationen oder bei Geräten, die bereits installiert sind, kann es länger dauern, das Kabel richtig anzuschließen und zu integrieren. Zusätzliche Kosten: Je nach Modell und Verfügbarkeit kann das Kabel zusätzliche Kosten verursachen, die über den Preis des Geräts hinausgehen. Dies sollte in Ihrem Budget berücksichtigt werden. Insgesamt bietet das Garmin Kabel für die Konstantstromquelle eine zuverlässige und praktische Lösung für die kontinuierliche Stromversorgung Ihrer Garmin Geräte. Mit einfacher Installation, hochwertigen Materialien und optimaler Kompatibilität ist es eine wertvolle Ergänzung für jeden, der seine Garmin Geräte in festen Installationen oder bei kontinuierlichem Betrieb nutzen möchte. Trotz der Notwendigkeit einer festen Stromquelle und möglicher zusätzlicher Kosten stellt das Kabel eine wichtige Investition in die Leistungsfähigkeit und Zuverlässigkeit Ihrer Garmin Geräte dar.

Över 200:- billigare här. Snabb leverans o bra paketerat.

Duur maar het werkt uitstekend met mijn twee Garmin dashcams in de auto.

El producto es original, de buena calidad, sólido, se instala fácil y queda firme en su lugar, funciona tal como se espera, sin problemas. El envío fué algo lento pero dentro del tiempo prometido.