Mudder 301 Pcs Grommet Eyelet Pliers Tool Kit, Fabric Leather Hole Eyelets and Grommets Punch Pliers with 300 Metal Eyelets for Belt Shoes Cloths(1/4 Inch,Gold)

I run into many occasions when I need a brass eyelet, and I bought now for a specific need. I keep my tees and sharpies and divot tool in a gallon zip-lock bag hanging on the side of my golf bag, but the hole where it clips onto the bag gradually enlarges to the point where the bag might tear off completely. The eyelets are in two pieces, the tall post, and the ring. I built a sandwich right on the tool, with, from bottom up, the post, hole #1 of a rectangle of black lens cleaner, the baggie itself, hole #2 of the lens rag, and finally the ring. Crimped the sandwich down tight, and it's perfect.Note: The crimping tool does NOT cut a hole in the material. With a regular hand-held hole punch, it is about impossible to punch a hole in a lens cleaner or a baggie, so I folded a piece of an index card around both sides of the baggie, and slid it into a strong 3-hole punch. The hole is clean as a whistle.The picture of the tool that shows in the ad is deceptive, because the idle position of the tool is wide open, like a big X, not closed as in the picture. I would recommend that the vendor throw a velcro strip into the package.No instructions come with the kit, but there are instructions on the ad page. Even without those instructions, the jaws of the tool are each shaped for their specific purpose. The jaw without a ball fits perfectly the base of the post. The post with a ball in the middle fits perfectly the ring. I can see that to put the post and ring on the incorrect sides might damage the jaws.

Follow the directions and it works perfectly

I had no issues with this tool. I've never used a grommet tool, but upon studying the design for a minute, I was able to figure out how the thing works in conjunction with the grommets.Yes, its a little cheaply made- isn't the greatest quality, but just don't press too hard when forming the grommets. Also, if you can get a hole punch (I used a regular hand-held paper hole punch) and make the holes in advance of using the tool with the grommets, its goes a LOT smoother.I think some users may be applying too much pressure with the tool and the cheap little pieces of metal (grommets) because they're not all that durable, so you really don't need to press very hard at all to get the metal to bend over.Also, as someone else mentioned, it does work the best if you can rotate the tool a little while pressing. Seems to make a more even clamping around the perimeter if you can move the tool while pressing, releasing, turning, pressing, releasing, rotating, etc.

Nicely made I just need to make larger grommet holes

I have to agree with both the good and bad reviews. If you follow the picture instructions located only in the product pictures at Amazon, you will be able to attach the larger grommet with the included tool. One side of the fabric will look good and the other side will look okay. I only say okay because it is not a two part grommet but only one piece that bends cut metal around in a circle. If you want smooth and finished on both sides I suggest you buy something with the two part grommet. The little grommets do not work at all. They are so small and soft that the circle grommet will become an off-shaped oval and not crush completely. The best I did was just start the crimp with the tool then use a hammer to lightly tap flat but that still left a tear drop shape and did not feel secure in the fabric. This set was a waste of money for me since I only wanted the small "eyelets" and not the larger size.

The pliers I received are not aligned correctly and do not fit straight/ flush with the other side when squeezed. This results in the grommet not properly clamping since it only folds over completely on one side, leaving a jagged sharp edge. Not useable in the slightest. I would have returned this item had I not wasted several of the grommet pieces trying to get the tool to work correctly.

Got this item to use for a tapestry we hung at our wedding. It was so simple to use and worked perfectly.. It came with 2 different color clasp things and the tool.. Love it and will be put to good use

You will get,what you pay.

No perfora, hay perforar antes con algo. Pero están geniales. Me han servido para mi lona de casa.

First, the product was delayed it's arrival for almost a week of its original date. There was no communication from the vendor to us until a day after the expected date. I filed a complaint to Amazon, them the vendor reach out to me. They try to return some credit to me for the next order, but given this experience, I would never use them again. I personally dislike zero communication between vendors and the client. The product comes without any instructions, I had to experiment a few of them to do it properly. However, the product's material seems cheap, it is not worse 30 bucks in my opinion.

تم ارسال كباسة كباسين وليس الحلقات

متوسطه خامه ضعيفة بس شغالة علي قد فلوسها

بتكون غير الوصف و الصورة و بتكون عن بائعين اخر بسعر اقل كثير بائع غير امين و عايز اشوف اي دور لأمازون التي لا تبالي بمثل ذلك ابدا