Hanatora RC-N3 N2 N1 N1C Remote Controller 4.7-13 Inch Tablet Holder Mount for DJI Flip,Neo,Air 3S/3/2S/2,Mavic 3 Classic,Mini 4K/5/4 Pro/3/2/2 SE Drone,Extended Control Phone Clip with Lanyard

This is the PERFECT mount for a Z Fold phone on a DJI Remote. The mounting method to the DJI remote is solid, and simple. It mounts to the actual body of the remote instead of the slide out spring loaded antenna/phone holder like many others do. I had an extension type tablet holder that was simple to install, but it was too short for the Z fold and would push the power and volume buttons on the edge of the phone. This holder is easy to attach and remove from the DJI Remote. The phone clamp is the perfect size and shape for the Z fold. The spring holds the phone tight, but not too tight. The phone holding clamp can be turned 90 degrees to hold the non-folding edges of the phone, which lines up well with the speaker holes and the USB-C connection, leaving the volume and power buttons reachable at the top making it easy to change the volume on your phone and to unlock it with the power/fingerprint reader if you set it down. If you adjust the holder right, it will balance well enough to set the remote down with the Z Fold attached without worry of it falling over. Out of the box all of the adjustment joints on the holder are super tight. I would be careful adjusting them, the entire thing is plastic except for part of the joints that are metal. You probably can adjust the tightness, there are some nice solid star screws, but I'm just putting it in one position and leaving it there. An awesome deal for the current price I paid ($22). I'm sure this would work great for an iPad mini. It might be a little tight for anything 10inchs or larger.

I was very skeptical of quality given the incredibly low price!!! I am old. I like big screens. Using the drone with my small Iphone is less than 100% enjoyable. Being able to hold the 10" tablet and controller as one unit is fabulous. The plastic is very rigid, but does not seem brittle. The joints are stiff (good). I had concern about storage, and continually twisting the joints. In the 2 months I've had it, the joints have not shown any wear. I have zero concern with the tablet falling out. The neck strap is nice. The controller and tablet hang okay. The strap does not interfere with the sticks. However, the tablet and controller is heavy and the strap is uncomfortable on the neck (duh, of course). Further, I do not use the strap as support while flying. That would be way too uncomfortable. I spent a bit of time finding a good bend in the mount to balance the controller and tablet. After finding that balance, the controller is easy to hold! This company should raise the price of this mount. They should not sell it based on how much it costs to produce. They should sell it based on the value the customer places on the product. I would have paid twice the price. Will this product make me fly better? No. Does it make me happy? Yes, every time I slide the 10" tablet into the mount!

This tablet and phone adapter is the one to buy. It’s locks into the controller really well and releases with a push of a button. My iPad mini fits perfectly and I even like using this with my iPhone. The grip on the mount is strong, no slipping or jiggling. The joints are also very stiff which is great. The neck strap attachment points are the weakest piece of this purchase. The clips that hook into the loops of the mount get in the way of the sticks no matter how you twice them. I have tried several other methods of attaching and I have given up using the included clips. I cut the faux leather piece off the net strap and used a double-sided velcro strip wrapped around the mount loop at the edge of the mount and the neck strap and it works perfectly. in fact it helps hold the whole setup steady against your body with the the iPad wanting to tip it over. it's also very secure. Just a suggestion.

So far I like this and do recommend. It is tight, strong and has a good size range. Install is simple. The only down side for me is portability. I do not want to fold it up after each use, (still a chunky unit folded), so it makes storing it properly a hassle right now, but I will figure that part out. I found a position that I like that works well with both the iPad mini and android 8.3"? tablets I use. The weight feels balanced well, is not too heavy, and actually looks professional. I would give this 5 stars, but I want to wait a few months to keep an eye on the locking button, I can see that being the weak point. I will buy a second unit to keep as a back up and I will probably not buy a different model, this one seems almost perfect and very hard to improve upon.

After extensively using the Hanatora RC-N1 N2 Remote Controller Tablet Holder with my DJI Mini 2 controller and iPad Mini, I am thoroughly impressed with its performance and build quality. This holder is an excellent addition for anyone looking to expand their drone's remote capabilities by using a larger screen. The holder is easy to install, with a secure and adjustable grip, accommodating the iPad Mini perfectly without any wobble or strain. It provides a solid connection and remains stable even during long flights, ensuring that the iPad doesn’t slip out, adding confidence while operating the drone. The build quality of the Hanatora holder is commendable, featuring a durable and lightweight design. It does not add unnecessary weight to the controller, maintaining comfort and reducing hand fatigue during prolonged use. The adjustable angle is also a notable feature, allowing for optimal screen viewing, which is crucial when flying in different light conditions. The Hanatora Tablet Holder has certainly improved my overall flight experience with the DJI Mini 2, offering better control and an enhanced view of the drone’s surroundings. It has proved to be a reliable and beneficial accessory for both casual and professional drone pilots, making it easier to navigate and control the drone with precision. I would highly recommend the Hanatora RC-N1 N2 Remote Controller 4.7-12.9 Inch Tablet Holder to any DJI Mini 2 users looking to upgrade their setup. It is a top-quality accessory that provides value, reliability, and a superior user experience. This holder has certainly met and exceeded my expectations, earning a well-deserved five-star rating!

Quality made ipad holder that fits my controller perfectly..Recommend!

Very sturdy, stiff, and stable, even with a fairly large Galaxy Tab S6 Lite tablet in a bulky case. Comes with a neck strap and convenient loops to clip it to. One reviewer found that the strap interfered with the control sticks, but I have not had any problem with that. I also tried a simple hook that extends the phone clamp to hold the tablet against the front edge of the controller, as opposed to this one that positions it more over the control sticks. The hook style makes the controller more unbalanced; you have to strain to hold the tablet up, and you can't shift your hands for better leverage because you need to work the control sticks. The hook style is compact and fits in the DJI carrying case, while this one is too bulky to fit in it if you are also carrying the DJI 3-battery charger/power bank that comes with the fly-more combo. But in the end, I'll put up with having to carry the tablet holder separately (in the nice cloth drawstring bag it comes with) in exchange for a more comfortable flying experience.

I use a fold and this let's me open my phone up and use the larger screen and what a difference. The adapter is super easy to put on and take off and is solid as a rock. Phone stays in the cradle and doesnt move at all.

10インチのタブレットを使用するため購入しました。 イメージしていたとおり、しっかりと固定できて実用性十分の製品です。

8 months of using this holder, it is still working well with my HugeRock x7 tablet. Very heavy duty construction.

Excelente producto, cumple con las características mencionadas, de muy buena calidad. Recomiendo este producto para quienes utilicen los modelos de control RC sin pantalla.

J'avais acheté ce support il y a 3 ans, je l'ai beaucoup utilisé et j'en étais très content jusqu'à ce qu'il se casse, cela peut arriver. Etant satisfait du support, j'ai racheté le même, or ce dernier s'est cassé alors que j'étais en train de l'installer... J'ai donc échangé avec le vendeur qui ne veut pas que je le renvoie puisqu'il ne me propose aucune solution... Je suis donc très déçu, c'est la première fois que j'ai un problème comme cela avec un vendeur, c'est vraiment dommage mais je ne peux vous recommander ce support qui risque de casser et du coup occasionner la chute de votre tablette.

When I upgraded my iPad to the new iPad Pro 14", my previous holder to attach the iPad to my drone controller couldn't accomodate the new larger iPad screen.... thus the purchase of the Hanatora tablet holder which is perfect. It's designed and built well... with a firm grip on the iPad. It may not be the cheapest option out there, but those holders tend to be flimsy and move around a bit with use. I'm glad I purchased the Sanatoria.