[Upgraded Version Cup Phone Holder for Car, Universal Adjustable Long Neck Car Phone Mount Cradle Friendly Compatible with iPhone Samsung Google and All 4.0-7.0 inches Smartphones

I put this in the right side cupholder of my 2024 Honda CRV. Nobody ever uses the cupholders in my car, anyway, so that was the perfect place to stick something. I adjust it down into it's lowest position and it's just perfect--right where my hand can touch it when needed and not in the way of the gearshift. It surprised me that glancing at it while driving is less distracting--the view to the front is never obscured-- than when the phone is under the dashboard on the built-in charger. It fits very solid in the cupholder. Not shaky at all. I like the system it has for holding/releasing your phone. You just push the sides together to grip the phone and then press a little button on the back to make the sides pop open. You can run a charging cable up through the bottom into your phone. A 1.5 ft. cable will do it in my car but I used a 2 ft. black fiber cable that leaves a little slack so it stays out of the way and looks good, too. The quality seems good--nice, solid feel to it. I'm glad I didn't buy one that gripped onto the center screen or suctioned onto the dash or something worse. Nice thing about the cupholder method is that it has no effect on your car. If you don't want it in there, you just unscrew the adjustment ring, take it out and nothing has changed. In just a short time, I've gotten used to having my phone right there by my right side, so I don't think I'll be removing it. If it fits your car design and you can live without one of your cupholders, I highly recommend it.

For the time I've had it, its never gotten in the way because of the adjustability and is so easy to change vehicles with. Super sturdy.

It is well-made and very sturdy. It holds the weight of my iPhone 11 promax quite well and there is little vibration while driving. However, in my Audi automobile, the cupholders are both joined together with a deep valley. This makes the cupholders useful for storing sunglasses. But, this limits the orientation that the telephone mounting base can be positioned within either cupholder, left or right. The mounting arm connects to the cupholder base and is NOT rotatable. My fault, my past experience with phone mounts left the impression that the pivot arm was always rotatable with respect to the mounting base. Perhaps this should be made more prominent in the sales description. In a car whose cup holders are a solid 360 degree well sunk into the center console, rotation of the entire mount is done easily by rotating the base of the mount to the desired position. This is done by releasing the locking mechanism that extends 3 wedges tightly against the walls of the cup holder well, and rotating the mounting base as needed. However, both of my cupholders are not a continuous circle. Therefore rotation of the base is very limited since you must have all three wedges firmly pressed against the walls of the cupholder wells. Therefore, I can’t get the base and pivot arm rotated to the optimum position for my phone. Since the mount itself cannot be rotated, I cannot quite get the phone into a position that does not obscure some of the indicators and buttons in the lower center of the dashboard. Also, the phone clamp itself has just slightly NOT enough adjustability to achieve the best orientation, given the constraints imposed by the non-rotatable base. Another slight annoyance is that the clamp that actually holds the phone is not centered lengthwise on the phone. There is substantial imbalance when viewing the phone in wide screen mode, and it tends to gradually allow the phone to droop at the long end sticking out of the clamp. Also, the opening in the phone clamp allows only straight cables to be used to connect the phone; i.e., you can’t use a space saving cable that has 90 degree bend there at the USB-C plug. I was hoping I could use a right angle cable to keep the cable more directly aimed at the dashboard USB-C socket. Now the rather stiff cable arcs out into the space my hand needs to use to select some functions on the lower dash. It’s so close to being perfect for my needs, but it’s not there.

I have a 2019 Durango for my work vehicle. I have 2 phones, a mifi pack, and an old IPhone I use for Sirius XM. So yeah, cable cluster going on (not to mention a hand held scanner cable). I bought this to hold the old IPhone. It fits perfect and works as others described. I adjusted to where I wanted it for easy viewing, locked it in, and tested it. When I press the buttons on the phone the unit does not move. Perfecto!! The only suggestion to the manufacturer would be to make the base swivel as opposed to locked in place. Another half inch to the right and I would have had to send it back. Now....to find a way to mount that annoying mifi pack!!! ****Note, have not road tested yet, but as firm and solid as it sits, I can't imagine any rattle.

I had the Miracase vent phone holder in my previous car and absolutely loved it. I cannot use that phone holder in the car I am driving now so I needed to find a different option. I decided to go with a cup holder style since I didn't want to have attach the holder to the dash or have my phone obstruct my windshield. I love how easy it is to install. It took less than a minute to fit it to my cup holder and adjust the angle of the phone. It can fit into a majority of cup holder sizes since it expands to the opening by turning a dial. I can also adjust the angle and height of the phone. The phone can be used in landscape or portrait position and flipping between both positions is as easy as moving the phone. I have been using it for a couple of weeks and then phone holder had never loosened up or moved, even while driving on bumpy roads. It holds my phone firmly as it sits on a little ledge and is cupped with two side pieces that have a rubbery foam that protects against damaging my phone. Removal is as easy as twisting the dial. High quality and well worth the money

This is an awesome product! It fits my phone great and is very adjustable for any phones I know of. It has a spot for easy charging. and a great design to move it close enough to see everything! You can use it hands free with it right in front of you.

I replaced an older Iphone cup holder the the Miracase. Easy to install. I especially like the long neck because it makes the phone easier to see the screen. Using the swivel to change the phone from a vertical to horizontal position is very helpful and useful. I like that I can adjust the "neck" of the phone for visual comfort. This is certainly an upgrade from my older phone cup holder. The price is very reasonable.

This cupholder phone stand is fantastic. It is adjustable and almost any direction you need it to be. It fits all sizes of cupholders. The only problem that I had is that it didn't really come with directions. I had to figure out how to adjust everything which you think would be easy, but I'm old! The height is perfect so that it doesn't impede my vision otherwise but I can see it if I glance over. I bought it specifically for my Honda Civic, but it fits easily in my Honda Odyssey flimsy little cupholder that they give you. I've only had it for a little while so durability I'll have to comment on at some other time with an update but so far I love this.

I waited a few weeks after buying the Miracase in order to use it, and report back. It's perfect, and exactly what I wanted. I have an Audi A5 Sportback, with a dashboard that's curved and doesn't have room for a phone mount. This cup holder mount works well. It was easy to assemble, mount, and adjust. I'm also glad I took the time to read some of the reviews of other products, and bought one with a stiff neck rather than a flexible neck. The former doesn't bounce around while driving. I was also blown away to get a message from the Vendor a couple of days after delivery to ensure I got the right product, check how I liked it, and provide contact details for any questions or returns. First time ever receiving this type of proactive, customer service reachout from a Vendor. All in all, it's a high quality product with superb customer service. I wish all Amazon vendors would take a page from their book!

Holds securely in cupholder. Easy rotation between portrait and landscape. Note: previously tried a model with a built-in cupholder. A disaster: the cup holder could not accommodate a standard 500ml water bottle; the gooseneck phone holder shook. Simpler is better.

The holder fits my Apple 8 plus phone with the otter case fine , which is quite nice as many holders do not expand that wide . The holder itself is a decently made product , it does rattle when the phone is not in it . I have a smaller vehicle so it does seem to get in the way a bit of the gear shifter , I’m sure in a bigger car this would not be an issue . It holds the phone very securely and does not vibrate while driving .

No breaking any vents, not sticking to your dash, this is the best one I have had for a car to date. You just lose a cup holder.

Finally! A phone holder that works perfectly in my work truck. Solid, secure, robust, and fits large phones. Obviously will depend on cup holder position, but for me this is perfect. Great product.