Mcbazel 2 Pack Controller 3D Analog Joystick Thumb Sticks Replacement Repair Parts for Xbox One Elite 2

The media could not be loaded. You really need to know what you are doing in order to do this job and have the right tools the value was good and everything functions like normal fit like oem seemed like good build qualityInstructions:1. Disassemble controller2. I personally like to cut my none working joysticks apart and pull them out 1 by 1 like teeth it’s easier that way3. Remove remaining solder I used flux and sucker with solder iron at 900F4. Put new one in hold it down while putting new solder on I did 620F with little flux6. The elite 2 remote self zeros so no need to manually do it7. If you are doing elite 2 remote to test it put the two boards together and set it in bottom shell and plug it into pc/xbox to test it you can leave antenna wires disconnected this will help least likely to damaged it if you keep plugging and unplugging them higher risk of damage8. After testing reassemble the remote and make sure the freakin buttons are in the proper way sometimes they shift and you will put the whole thing together and have to disassemble the whole controller again just to rotate a button 40 degreesHope this helps NO tools or instructions were included

Gosh darn this was hard to install! That being said, they work as well as the factory ones on my Elite controller. This is much cheaper than a new controller if you get stick drift. That all being said, this isn't an install for beginners. The soldering involved is almost as hard as disassembling the controller. Being careful not to break anything or overheat the board it took about an hour to fix myself.

Not worth your time or money. They do not work. These were worse then my original ones. The left stick would stay at the 10 or 11 o'clock position and not move the right had to many errors. I ended up removing all the magnets in my elite 2 controller and put a set of TMR sticks in it.

Analog Pot Worked Great.....Takes a few minutes to remove the original thumb stick analog pot and button functionality.Patience is needed for clearing the ground plane through holes.Replacement was exact pin spacing and work immediately.Expertise is soldering and a microscope is extremely helpful.

After buying this part, I immediately went to a repair shop to have my Xbox Elite controller repaired. Now there's no more stick drifts on my controller, it's all good as new!

A bit better quality than the last ones I ordered from a different seller, and they work as intended.

They work as they should and got completely rid of my drifting in my joysticks. They were easy to use and install on my own, the quality of them are 10/10 and the value for what you pay is a steal.

I wanted Alps thumb sticks, I received Alps thumb sticks. perfect.