Nilight - TR-05 2PCS 60 Inch 180 LEDs Bed Strip Kit with Waterproof on/Off Switch Blade Fuse 2-Way Splitter Extension Cable for Cargo, Pickup Truck, SUV, RV, Boat, 2 Years Warranty

As expected, good product, nice lighting for 1.5w

Good Quality

جيد

The adhesive at the back sticks perfectly well, and the light were very easy to wire up

Overall the product is nice and very bright. Connections and wiring are simple to accomplish in an hour. The only issue I had is the supplied screws for the light mounts are junk. Every one I tried broke and now I have a few broken screws in my truck bed.

I ran a cable from my battery, to the bed of my truck along the same path as my vehicle's wiring harness. Soldered, and sealed the connections, then sealed the controller box for good measure. I put the controller box behind the driver side tail light housing, then routed the wiring down along the through already existing gaps and ports near my tailgate. I routed the passenger side along the vehicle harness for the passenger tail light, to the controller behind the driver tail light. Then I affixed the led strips under the rail system my 2019 Tacoma, double cab, long bed came equipped with. The leds are VERY bright, go along with music via vibrations, and have some pretty color light effects. I mainly need a bright white for every day use, and red for when I am camping so I don't disturb others. They serve this perfect very well. I may order a seperate set and set it up to alternate red and green with this set during the holidays. Very good quality. Very affordable price. Took less than 15 minutes to install even with my minor modifications. I used clear silicone aquarium sealant to seal up the controller box since it is a rather light, somwhat open to the elements box.

Purchased a second set to install on another vehicle.

Bought for bed lighting, I have a bed cover and it's impossible to see in the back at night. I used 6 in the bed and 2 for puddle lights, wired them to the cab light so they fade out and come on with doors or dash switch. I screwed them in to the bed liner and tucked the wires behind so install was simple, puddle lights were tucked in the rocker to cast light on the running boards. It looks great, they're nice and bright, I've had them for a few months and they haven't failed yet, used the bed as a work bench christmas eve to build bikes without getting caught. Install can be as easy or as difficult as you want it, I hid the wires, hooked the feed in to the truck instead of running separate power and using the included switch. They're LED so they don't pull anything for power and I had an unused power source so a separate power feed wasn't really needed.

Awesome lights and very bright. Install was easy.Wish there was a option to get the lights more separated. Maybe 4 feet of wire in between each light.