🔋 Power your conversations, own the road.
This 3.7V 900mAh lithium polymer battery is a premium replacement for Sena 10S, 20S, and 30K series Bluetooth motorcycle headsets. Featuring a compact design, advanced Japanese Seiko IC protection, and compatibility with other low-power 3.7-5V devices, it ensures safe, reliable, and long-lasting performance for your on-the-go communication needs.
Item Dimensions | 1.59 x 0.98 x 0.31 inches |
Item Weight | 16.8 Grams |
Battery Weight | 16.8 Grams |
Unit Count | 1 Count |
Battery Cell Type | Lithium Polymer |
Recommended Uses For Product | Motorcycles |
Reusability | Rechargeable |
Battery Capacity | 900 Milliamp Hours |
Amperage | 0.9 Amps |
Voltage | 3.7 Volts (DC) |
M**F
Perfect fit in Sena 20S - has the correct connector.
Perfect fit in Sena 20S - has the correct connector.
R**N
Good fit
Perfect fit for Sena 30K
I**N
Exact fit
Exact fit for my application
B**T
Failed to perform.
I got 2 charges on this battery then it stopped charging.
M**Y
Works after jumping through the preverbal flaming hoop. (Wooops! My Bad)
UPDATE UPDATE UPDATE.............I have a Sena SMH 10 FM. Sena must have a dozen variations of the SMH10. My SMH 10 FM is maybe 7 or 8 years old, but recently, it would shut down after 2 or 3 hours of operation because of “low battery”. This replacement battery looked like an excellent choice due to a one to one replacement. However, upon receipt, the plugs did not match. The replacement battery plug was different, slightly smaller.So I looked at Utube videos on how to solder a new battery to the original plug. Looked like a piece of cake. Except that I had no soldering experience, plus no soldering iron, wire stripper, flux, heat shrink tubing, or solder. I invested in all this electronic equipment that I will probably never use again and, I quickly found out that soldering is a learned skill, and not as easy as the videos portrayed for a first timer.With much frustration, I bungled my way through the soldering the replacement battery to the original equipment plug. I then discovered that the replacement battery was thicker than the original battery!!!! I learned some new curse words in trying to reassemble the unit after I installed the new battery. SON OF A BITCH!!!!!. The two parts did not want to snap together due to a thicker battery!!!! After a half hour or so, and a Herculean struggle, I got the two parts back together.So, 5 stars for having a new battery for a longer operating life, (I hope), and 1 star for the convenience of replacement. YMMV.NEWS FLASH!! It turns out, my Sena unit is a SPH10H, and not a SMH10S.It sure looks like a 10S. but it isn't. I would have thought Sena would standardize the batteries and plugs for the entire 10 line, but not so. so I'm changing my rating to a 5, cause I didn't read the description close enough, and now have it finally installed, all is well,
T**R
Perfect replacement for worn out OEM battery
I have the SMH10-11 dual version and these batteries were a direct replacement. I did verify polarity and it was correct. We’ve had these for 9 years and hopefully for another 9 years now.
R**T
Excellent and easy
This battery is a drop in replacement for the original battery which came on the Sena 20SBonus is that it is 900mah vs the 650 mah OEM battery.
M**N
Easy to install and lasts longer than OEM.
Was a little bigger than OEM, but fit fine. It does last longer than the OEM and it was easy to take the communicator a part and install.
Trustpilot
1 month ago
5 days ago