TAC Modular Bull Bar Compatible with 2007-2021 Toyota Tundra | 2008-2022 Sequoia Truck Pickup Fine Textured Black Front Bumper Brush Guard (Predator Mesh Version) (Patent No.: US 10,315,599 B2)

When it comes to vehicle upgrades / add-ons, I’m really OCD about everything looking as factory and as seamless as possible. I’ve always been really skeptical about push bars because they all generally look like an add on. They don’t look like they belong there. Whereas a full bumper does if you know what I mean. This push bar is the exception for me. I really really like the aggressive, more law enforcement style look of it, vs the traditional rounded tubular bull bar. This matches the body lines very well and looks like it belongs there.ASSEMBLY: The directions are pretty straight forward and fairly easy to read. My only complaint here is the hardware comes all in one bag and is not labeled. Take the extra 10 minutes in the beginning and organize it and I promise you it’ll make life so much easier. If you have any level of mechanical inclination, you’ll figure it out no problem. If not, just take your time and make sure you’re installing the right bolts. The biggest bolts in the kit are for mounting the whole bar to the frame mounts. That’s really about it. Smallest ones are for the mesh insert and light bar bracket. The rest (majority) are for actually putting it together.INSTALL: could not get any easier. Uninstall the factory tow hooks, put the mounts on, reuse the bolts from the truck. It’s simple. Biggest thing here is to not snug everything down until you get it on and get it square. Get a measuring tape and take the extra 5 minutes to measure and square it up before you tighten it down so it doesn’t look like Helen Keller put it on. You got this!!Overall I’m very happy with the product. Feels very sturdy on the truck. Looks good. Can’t beat it for the price. 5 / 5 stars

I did like the design and quality as well. Great design

The bar is fantastic! Assembly was reasonably straightforward, although the bolts could've been packaged and labeled better to streamline the process (definitely took over an hour just categorizing and sorting out the hardware beforehand, making sure everything had the right place to go, etc.).IMPORTANT NOTE: I had assembled the entire thing, and then went to install it on my vehicle, and the bolts on my frame were rusted and unable to budge. I tried everything: breaker bar, impact drill, special coolant-spray, nothing worked. Ended up having to pay much more money than just the cost of the brush bar itself just to get it installed, because I hadn't looked in advance if it would be realistic. Nevertheless, I'm happy with it.Also important note, because I didn't see this anywhere: If you have a "Platinum" trim of the Sequoia, unfortunately this bar seemingly does interfere with the cruise control front radar sensor. I haven't troubleshooted this yet, since I only just got the bar installed.

Super finish and high qaulity welds,easy install and I was able to retain the tow hooks even though they are now covered by the "skid plate" Keep in mind this is a Cosmetic bull bar,not for pushing your brothers 71 Impala out of a field,if you want that ability be ready to spend 3 to four times as much,You will need an extra person at least to hold it up while installing bolts,was easy peasy for me, Daughter and her husband happened to be here and each held a side while I bolted her up,Would buy this again.

Good packaging! Seems decent quality! Fairly easy install with some mechanical experience! Assembly required! Looks great installed! Can’t wait for my LED strip UPDATE: After a few months one of the mounting brackets seems to have cracked on its own. Pics included. I had to remove the TAC bar to keep it from continuing to crack and fall off the vehicle! I contacted the seller to see if they have replacements brackets available! Awaiting response. UPDATE: Excellent customer service!! The sellers instantly replied and within a day or two I had a replacement bracket sent out and I easily replaced it in about 10 minutes.. hopefully the first one was just defective!! Still the best lookin bully bar out there! I included a pic of the broken bracket for potential buyers to use as a guide for a periodic inspection point as it seems this may be a week point and a possible design flaw in the bracket! If it wasn’t caught in time it would have broken off the vehicle and as you could imagine could have been a complete disaster!

Bull Bar arrived very well packaged with plenty of foam and protective materials to prevent damage when shipping.Upon opening the large box I was pleasantly surprised to find a bull bar with very nice solid welds and simple beefy brackets to bolt to truck and nice stainless hardware.The bar had no nicks or dings and after some adjusting went up in less than 30min.On Toyota’s they have factory tow hooks and you’re able to keep your factory tow hooks in place with the nice wide brackets. They leave you plenty of room to adjust the bar forward, away from the truck, or closer up if you prefer.I installed a License plate relocater bracket and it fit flawlessly to the center bold that holds the brush guard below on. You can also remove the hex bolts on the lower brush guard and remove it completely if desired as well.The Holes for off-road lights come with nice Rubber Plugs in them in case you don’t use them to prevent water intrusion. I plan to install two Stainless Steel KC Daylighters and will update this post on how easy it is to do and how sturdy they feel.For the price and what I was given, so far I am pleasantly surprised. I put a wax on it as directed once I installed it, it is supposed to be “Marine Grade Stainless Steel” so since I’m in Texas I’ll definitely put that to the test.