AirdogA6SABD425 Fuel Lift Pump (98.5-04 Dodge Cummins Preset@15-17Psi ii-4G)

The return to the tank line is smaller then last one kinda a pain .seems good tho . This is a back up pump i purchased to carry as a extra thus the return fuel line smaller .my engine runs smoother more power with first install.thanks airdog great pump

I'm writing this review a year after install everything is still working great pump us quiet and strong during install I had to buy a beans diesel sump I highly recommend ment you do this the draw straw it came with is kinda Janki and has a hard time drawing fuel under a 1/4 tank but I have came to realize the only bad thing about the item is they sent a wix 6 microm fuel filter with the pump not a air dog 2 micron Which is not acceptable I hope mine was just a fluke and they ran out of their normal filters or something

2001 Dodge 3500 Ext. CabSo far the system has performed well. Have about 3000 miles on it. A fuel pressure gauge is next to truly see if the product is operating optimally. Rated 4/5 because the provided bracket allowed for a limited amount of mounting locations on the chassis. Opted to make my own bracket and the result has been great. This product has been an albeit costly but worthwhile solution for the stock in-tank pump.

Installed this on my 99 ram 2500 and it works perfectly so far. Keeps a steady 15-16psi of pressure, instructions were great and was fairly easy to install

so far so good

I ordered this for my truck and was very excited about it despite all of the issues I found when I researched about quality control and customer service. I have only just began the install and wanted to share my experience in order to help customers not make the same mistake I did. First, I wanted to change all of the quick connect fittings to JIC style because I have always had issues undoing older push to connect fittings. So put the bulkhead that is to be installed into the wood vice to remove the push to connect fitting and see what threads it has so I can order a JIC fitting of matching specifications. When I unthreaded the fitting all of the threads came out with it. The bulkhead and the quick connect fitting are ruined. When I inquired about my problem I was told it was my fault and that I should have not unthreaded the fitting. I was told since it was my fault that Airdog would sell me an entire module for another hundred bucks. The phone representative ended up hanging up on me when I expressed my persepective that the parts were defective.This was my arguement:1. Threaded fittings should be able to be unthreaded and rethreaded as per industry standards of threads and their purpose.2. There were no indications in the instructions that this specific fitting should not unthreaded because of this issue.I would like to warn other customers to use extreme caution when purchasing from airdog and be prepared for the company to not stand behind their product. Buyer Beware.I believe this bulkhead design is flawed in order to produce the product as cheap as possible while making the product unserviceableI believe that Airdog should have stood behind their product and did not.I will contacting a third party for the rest of my installation needs based on the my experience with the poor quality parts and customer service from Airdog.

best one