WORKPRO 60" Adjustable Workbench, Rubber Wood Top Heavy-Duty Workstation, 2000 LBS Load Capacity Hardwood Worktable with Power Outlets, for Workshop, Garage, Pack of 2

Why did you pick this product vs others?:Nice and sturdy bench, goes together easily

I looked high and low for a nice and sturdy stand for my new 75 gallon aquarium.I looked on-line and in brick and mortar stores.The pre-made aquarium stands available were either too expensive, not strong enough (in my opinion) or both.Seriously, take a look at some of the aquarium stands sold at the large chain pet stores. They are made from small square tubing. They do not look strong enough at all. Plus they are expensive!I looked around before deciding on this 48" Workpro table. A 75 gallon tank with accessories weighs at least 850 pounds. This table is more than up to the task.When I opened the box I was impressed with the quality of everything. The top is gorgeous! I received a perfect, blemish free top.The metal parts are heavy duty. Nothing is scratched. Nothing is bent. Everything lines up. All hardware was there.Assembly was straight forward. The wood top is made of very hard wood. I would suggest small pilot holes and a power drill / screwdriver to assemble this.I did wonder why Workpro didn't include an Allen wrench. I don't need one as I have a vast tool collection. I don't know that everyone would have an Allen wrench. No matter. Just be prepared to have an Allen wrench set handy when you get this.I did see a comment about the four little metal parts that look like corner braces. Those are used for protecting everything during shipping. They do not do anything. The instructions clearly show a picture of those parts and states that they are not needed and can be discarded.The hardward is good quality. The fit and finish on everything is perfect.I am not using the attached power supply, as 4 outlets are not sufficient for my needs at this time.I zip tied a large surge protector to one of the legs.Another feature that I never thought about when researching an aquarium stand was getting it level.With this work table I was able to fine tune the table to get the aquarium PERFECTLY LEVEL.This table is STRONG and this table is SOLID! It does not move or wobble or sway. NO movement whatsoever.I thought I might have so add some cross braces to provide more support. Nope. This table doesn't need to be reinforced in any way.The added benefit of using this table as an aquarium stand is that I will have a nice work table to use if I decide to take a break from the aquarium hobby.This work table is so nice that I am considering buying one for my garage.Seriously, the table that I received is furniture quality!

I have purchased two of these work benches and they are well built. Wanted something to put in the house for craft tables. They have enough top space for multiple items at once. Heavy enough for using shirt press and the electric strip is an added bonus. Well worth the price for the build quality.

Packed in the Box, this item is Heavy! FedEx Delivered it with a 2 day delay. Saw FedEx pull up, raced to put Shoes on to help unload. Driver had box at trucks door, he was behind it, he just let it fall out of the truck :( I asked to just leave it there. The Box was Heavily Damaged & Tape was put on by FedEx to try & keep it together. To my surprise, all parts were still in the Box & no damage was done to the material inside. My one suggestion is the the Company to make a quick Video on Correctly putting it together. It took about 15 minutes to lay it out correctly & start the process of putting it together. They suggested using a Philip's to attach the frame to the table top, but with 20, or do Screws, that was not going to happen. Used electric drill, had it put together in 45 Minutes. I would have no problem putting close to 2000 pounds on this, but I purchased this for my Mother, needed a Sturdy, Adjustable table for her Sewing Machine. She Loves it, She Loves the Plug ins at the end of the table that has an on/Off Switch. it looks good & I am happy with the Purchase.

The packaging was good and suffered no dings or damage. After unpacking the bench, the hardware (screws) had come out of the small zip bag. I ensured I had all the required hardware before starting. 22 tapping screws and 8 bolts. All there. I suggest you give instructions a good review before starting to understand how the legs and side rails connect. Not super hard to figure out but recommended. The legs are already bolted. You just need to tighten after you get the side rails connected to each side. I recommend two people and placing the frame on a work table. I have two horses and a couple of boards as my upholstery work top. That helped. Make sure you don’t tighten the screws until you’ve gotten the frame and corner pieces lined up properly. Once you have the frame together, proceed with placing the wood top on your work table and then place frame according to the position tabs. I suggest you use a tape measure to ensure the frame is even on all sides.You will need to drill holes where the tapping screws go into the slots. Remember you have 22 tapping screws. Once you have that done, screw the screws just so but not tight. The other part when you tighten the bolts on the legs use the hex wrench and 13 mm spanner (wrench) to tighten the bolts on the legs. Once you have all your hardware positioned, tighten them.The table turned out great. It seems to be a sturdy top and legs. I’m using it for my heavy duty sewing machine. Haven’t tested it yet but will soon. The frame is good quality and so is the rubber wood top. Worth the money. I want have to worry about my table vibrating when I use my sewing machine or the table buckling under the weight.I recommend buying this table if you are looking a sturdy workbench. It can be used for multiple purposes. Nice looking top. And can blend in with your decor or it can be used in your garage or storage room. One other thing it does not fold so be intentional about where you want to place it. Does not come with wheeles.

Very sturdy table. Pretty easy to assemble, heavy for one person but I managed.

This table is functional and so sturdy. It now has three of my often used tools/machines right at my fingertips, and enough space to store supplies under it. I am very happy with this purchase.

Quality product, went together effortlessly. Nice hardware and instructions. I don't know what Rubber Wood is, but the top is solid and strong.