Hatchbox 1.75Mm Black Pla 3D Printer Filament, 1 Kg Spool, Dimensional Accuracy +/- 0.03 Mm, 3D Printing Filament

I highly recommend this filament brand. Previously I used eSun PLA+ on my Ender 3 V2 and sometimes every few prints I face some issues, and getting the temp right every time was probably one of the reasons. Not saying eSun is bad, it's just less forgiving than HatchBox. I decided to try the normal PLA, and all the print quality is guaranteed smooth. Not to mention, I previously had issues with my nozzle clogging every few prints. Now I only did it once when I first installed the filament. I am only within the first month of my purchase and the filament is about to finish, that's because of how successful the prints where I managed to print more than usual.

I have been using Hatchbox's ABS for the last few weeks and this is my first roll of black ABS from them. I use it on my Flashforge Creator Pro 2 which is a dual extruder printer. I wound about 30m of the filament on to an empty spool and loaded both spools into the printer as I wanted to do dual printing. With a setting of 230 Nozzle 105 Bed, the first few layers were great, but then filament stopped flowing and the printer was air printing. From the nake eye, it seems that filament stopped at about the same layer on both prints. I had to disassemble the printhead to clear the jam. It seems that the heat softened the filament causing it to compress and bulge in the PTFE tube just before the nozzle. Thinking that it is heat creep, I lower the nozzle temperature to 220 and the 210. Both times, I got the same result and have to disassemble the print head to clear the jam I have used Hatchbox silver and blue ABS and am still using it now to print as we speak, and both this colors print with no issues at all at 230 nozzle and 105 bed. So it must be a quality control issue. As I have split the spool between 2 spools, I have not bothered to ask for a refund for this unusable spool of ABS

depues de usar varias marcas de filamento Hatchbox es de la mejores marcas, es la q busco mas. si eres nuevo en impresion 3D ni uses filamentos genericos no tendras buenos resultados no tienen la composicion q se requiere. muy recomendado hatchbox

Good one. No bubbles and pretty hard material.

Überall hört man, wie toll das Hatchbox Filament ja so sein soll, weswegen ich mir auch mal eine Spule davon bestellt habe. Ein paar Monate später ist die Spule fast leer, aber es hat auch nur so lange gedauert, weil ich jedes andere Filament vorgezogen habe! Die Haftung der ersten Layers ist die schlechteste, die ich jemals erlebt habe - und das auf einem beheizten Bett mit PEI (Prusa i3 MK2). Ausserdem ist mir mehr als einmal das Filament vor(!) dem Extruder gebrochen, während der Drucker nicht in Benutzung war. Das habe ich vorher nur bei NuNus erlebt, welches ich wegen der äussert miserablen Wicklung auch nicht mehr kaufe. Ich bleibe lieber bei Jandex und Material4Print, die sind äusserst zuverlässig.

When you are pretty new to a hobby, you need a product that is easy to use, and this doesn’t disappoint. I printed a temperature tower to get my setting right with the product, and there was very little difference throughout the recommended range, so little that I had to double check that I hadn’t printed the whole tower at the same temperature setting. It might not mean much from a professional standpoint, but to an amateur, having a pretty wide range that the product remains stable and useable means that it’s less messing around to get things set up right. Some other brands that I’ve tried have had pretty narrow temperature ranges to get a good result. On top of this, the finish was clean, adhesion was excellent, no shrinkage at the corners that I’ve had with other brands, and no nasty smells while printing. I definitely understand why it’s rated so highly, even if it is a bit higher priced than the competition. Reliable and easy to use, shame it’s now out of stock when I need another roll of black.