ProSelect Stainless Steel Classic Dog Bowl, 2-Quart

These bowls work well for us, the build is decent and it solved the issue of our puppy eating our plastic bowls. We use them to replace the chewed up plastic bowls in our raised feeder.Regarding the stickers, yes, these did come with some ridiculous stickers in the bottle of them that were stuck on there really well although I had no problem removing them quickly by applying a little heat with my heat gun, A hair dryer should do the same thing. There was a tiny bit of residue left which I removed by spraying a little WD-40 on and wiping down with a paper towel. The of course wash the bowl good before feeding the pets.I would call these a medium duty bowl, they are not super thin, or thick. I would think I could drop them on the concrete floor without causing any major damage to them.My wife had seen similar bowels at Target for about the same price and thought they were a bit more stout, I went with these because I don't like going to the mall, AMAZON PRIME.

i would have been happy to pay an extra dollar to have an easy remove label. it is hard to remove and to boot they put it on the inside of the bowl. i don't want my dog eating a label!

I would have given this pet bowl 5 stars gladly. It is a super pet bowl, probably the best non-gravity pet bowl I've ever used; however, as you can see in the picture, there is a sticker on the bottom inside of the bowl. it doesn't come off. I've used my fingernails, a knife, a spoon, GooBeGone, and the list is endless. There is always that white stuff under the sticker that wants to fight you. Mind you, I WILL get the sticker off. I just don't think I should be required to dedicate so many hours of my life to this endeavor. So, if you want a great pet bowl, this is the one you want IF you are willing to battle the sticker. Why couldn't they just have put the sticker on the bottom???

The bowl, itself, is perfect for our needs. We have two large dogs and these bowls are deep, as opposed to wide, so they hold plenty of water without taking up a ton of floor space. BUT, I'd love to know what bonehead decided to use a label adhesive that does not dissolve under hot water, to adhere a label to the inside of a bowl that will be used to hold drinking water. After scrubbing under a steady stream of hot water for a solid 5 minutes, I realized that was just wasting water and making no headway. The label was gone, but the adhesive was still there. So I left it to soak for 20 minutes...still no improvement. It's now sitting with a bunch of adhesive-removing chemical sprayed on it. I'll give it another 5 minutes before trying to scrape it off, again. It is really frustrating that I've spent this much time and ended up having to use a chemical adhesive remover just to get this bowl to the point where I can fill it with water and put it down for the dogs to drink from. Yeesh.

Bought a number of these for new pups. The 2 qt fits the Neater Feeder Express large if that helps anyone. Like other reviews had to remove as much of the sticker as possible, then soak with goo gone. I used the flat side of a dish scrubber to remove the remaining residue. And then ran through the dishwasher to sanitize. Oddly enough, I also purchased a few pails by same manufacturer (same brand sticker) for hanging water in crates and those stickers removed easily in one piece.

The label on the inside of the bowl wouldn't come off. I soaked it in warm water overnight, but glue residue remained. I had to use Goo Gone to get the darn label off, but bye-bye mirror finish. C'mon, Pro Select. How much extra would it have cost to use an easy-to-remove label? A nickle?

Put the bowl upside down in the kitchen sink. Pour boiling water over the bottom of the bowl. When you turn the bowl over you'll find the sticker practically falls off when the heated adhesive lets go.Bought this for pot-in-pot cooking for 6 quart Instant Pot. Works best if your trivet is taller than 1 1/2"; otherwise you will need to make an aluminum foil sling to more easily remove the bowl at the end of cooking.

I didn't have the issue that some people had with the sticker. It came right off with no residue. My issue is that it was stated that it was an 8" in diameter bowl (including the lip) and in actuality, it's a little over 8 1/4". Typically that would not be a big deal but it was that much off from fitting into my feeder correctly. Bummer!

the only thing i like is the sticker . so hard to get it off