🚀 Elevate Your Ride with Style and Comfort!
The Kuryakyn 6383 Premium ISO Handlebar Grips are engineered for 2006-19 Honda Gold Wing GL1800 & F6B motorcycles, offering a sleek gloss black finish and advanced vibration dampening technology. With a lightweight design and unique airflow features, these grips ensure a comfortable and secure riding experience.
Vehicle Service Type | Street Bike |
Color | Gloss Black |
Brand | Kuryakyn |
Global Trade Identification Number | 00191209015916 |
Manufacturer | Kuryakyn |
UPC | 182682244986 191209015916 |
Model | 6383 |
Item Weight | 1.08 pounds |
Product Dimensions | 13.8 x 10 x 2.5 inches |
Item model number | 6383 |
Is Discontinued By Manufacturer | No |
Exterior | Painted |
Manufacturer Part Number | 6383 |
OEM Part Number | 6383 |
R**T
Very comfortable and good looking
My hands were cramping after riding for a couple of hours in strong gusty winds. These grips have solved that problem, in style. They are more challenging to install than I expected. The directions are good and complete, although I found it easier to have the rubber tube portions fully installed into the two chrome halves (without inserting any screws) as it gave me something solid to force the rubber tubes over the existing grips. You have to ensure that the raised rubber sections are completely inserted into the notch-outs in the chrome before installing if you do it this way. I also used a pair of large Channel-Lock pliers (and a towel to protect the chrome) to squeeze the grip halves together so the screws would properly line up and go in easy. I was really concerned about cross-threading the screws as it seemed like it would be very easy to do.
R**Y
Good cover fit
This is a good grip for comfort and handling control. But it takes higher heat setting for the heating part of the grip.
C**R
Substantial Grip and Looks GREAT!
Second pair of these grips; first pair on '06 Goldwing, chrome. My current '16 Wing is chrome-free; these black grips compliment the stock bars nicely. As another reviewer noted, the installation instructions are correct. Follow them. Friendly suggestion; work the grips before attempting installation. Put them together in your hands, separate, repeat. Windex or similar cleaner a must! Soak the OEM grips and slide these right on. Zip ties - as suggested - another must. Really helps when screwing two halves of each grip together. Lastly, grips heat-up nicely; not as warm as 'pre-installation' of the ISO grips but plenty warm enough. Highly recommend.
D**Y
Great feel
Great feel and look. Grips heat nicely on my goldwing but not as hot as stock. Installation wasn't bad however the screws are way too weak. Dont try to tighten them with the short end of a allen wrench. They will twist off before you think they are snug!
C**7
Not worth the price.
They shipped quickly and looked great. The hardware is a little weak, one of the screws snapped before bottoming out. The overall diameter is comfortable on the highway but a little to big when you get into the twisties and have to do a lot of work. Overall not a bad product just not right for me.
B**C
Honda grips
Looks great a little difficult installing but with time and patience they feel great
F**X
Vast improvement over OEM grips
This is my second set of Kuryakyn grips. In addition to the improved appearance of the grips, I have found that they hold up very well in all types of weather. I also like the increased grip diameter as it feels more comfortable in my hands than the original ones, especially on long trips. When turned on, the heated grips do not get quite as hot as the OEM setup, but I have ridden at temperatures of 40F and have been comfortable.
K**T
That was easy because the sleeve is movable for quite a while ...
Just installed on 2014 black GL1800. Installation went very well. Used Windex to help slide the sleeves on. Not a problem. You have to line up the notch on the right grip with the heat wire at the bottom of the grip. That was easy because the sleeve is movable for quite a while after it is slipped on. The left grip also has a notch for the heated grip wire. The actual notch for the heat wire is on the outer shell halves. I used 3 16" cable ties per side to bring the outer shell halves together. Just line them up on the 3 flat spots (on outer shell) between the pads. Tighten the center tie first, then the other 2. It pulls the halves together beautifully so they lock in place. Then put in the screws that hold the halves together ( 3 on the right and 2 on the left). Next the endcaps and screws. Don't forget the long screw for the left grip that goes in before the endcap. After this is done cut the ties loose and you're done! 30 to 40 minutes with no prior experience doing a job like this. Read the instructions. They are correct!
A**R
easy to install
look great, easy to install, much more comfortable than stock
D**H
Great product
Fit great. Replacement set of the same
R**U
Seller change me 30% to return IF it's unopened
The Amazon page didn't warn me that it doesn't fit my bike. And now it does... I tried to install it but it does not fit. The one star is for the seller not the product itself Konquer online.
Trustpilot
1 month ago
3 weeks ago