3Idea Premium PLA+ Brown 3D Printer Filament 1.75mm Dimensional Accuracy +/- 0.03mm Net Weight- 1 KG

The 3Idea Technology PLA White Filament is a high-quality filament that is perfect for 3D printing. It has a dimensional accuracy of +/- 0.03mm, which means that you can expect consistent and precise prints every time. The filament is made from high-quality materials that ensure durability and reliability. It is also easy to use and works well with a wide range of 3D printers. The filament is compatible with 3D printers that support 1.75mm filament. The 1kg spool of filament is packaged in a vacuum-sealed bag with a desiccant to ensure that it stays dry and free from moisture. The spool is also easy to load onto your 3D printer, thanks to its design. Overall, the 3Idea Technology PLA White Filament is a great choice for anyone who is looking for high-quality filament for their 3D printer. It is easy to use, reliable, and produces consistent and precise prints.

Good one but not the best worth for the money that's it ♥️👍

Nicely vacuum packed. Does have good strength as it did not break while hanging from spool to printer. Though recommended temperature for printing is 190-210., it did have problem in adhesion which was resolved by bringing bed very slightly close to nozzle and increasing extruder temperature for first layer to 205. Now perfect adhesion. I think it's probably because of higher strength of material. I would recommend this filament and will look to buy in bulk if seller gives good deal. Update : Included video of print quality. Printer is Ender 3 with skr mini e3 board, model printed is baby groot cup. Model is really smooth, nice filament. As you can see in video it is printed without supports and excellent bed adhesion with manual bed levelling only.

received red PLA instead of yellow, and spool holder is recycled paper. the filament is improperly wound around, so during a print it got stuck and broke

Im writing this review after printing multiple models of all kinds using Ender3 V2. (Eg- 2 feet wide Velociraptor, Elder wand, GOT Throne, few of my own models) I have printed with Silver, Gray and Bronze filaments so far. All came out pretty good. It is good to go brand. I did not face any problem with the filament. There are no entanglements, clogging, breakage. I recently printed with silver filament which is in open shelf for 4 months. It printed as a new filament. I like these products... I also want to try few more brands... Suggest me if anyone have printed with other brand filaments.

Like others have stated, its main issue is inconsistency. Its stringy and doesnt matter how much you tweak the retraction, it deviates soon and you end up with a lot of stringy goop. I have had a few prints fail because of clogging and low bed adhesion as well. Bed adhesion can be improved via brim settings. end of the day, it is what you pay for. This is the cheapest filament out there, and will be good for prototyping UPDATE after using 1/4th the spool: First layer temp - 210C Print temp - 205C First layer bed temp = 60C printing bed temp = 50C Retraction 8mm I used it on my ender 3, with a custom part cooler shroud. Part cooling is important for this filament as it is quite goopy. With these settings you will get decent prints, however the moisture in the filament causes issues with finish. i bought another similarly priced spool (elegant goop) *wink* and that filament is 100x better than this for a slightly higher price.

Tried the PLA filament of 3 idea on Creality Ender 3D printer. Observations are following. Pro- 1. PLA filament flow is smooth, tried on 8hour print job. Well wound on spool ,no tangling. 2. Job finish is OK even with 0.28 layer and 10% fill. 3.Nice vacuum packed Cons- 1. Had kept nozzle temp at 200 and bed at 60 degrees, but some wrapping observed at job corners. Bed temp may have to increase to 65 deg for future jobs. Manufacturer may suggest for this. Photo uploaded. 2. PLA color is not pure white but little towards Ivory white, compared to other brands. Over all product is good.

Average print quality, does the job for its price, colour was obviously white, had a lot of problems with the filament tangles almost lost my 3d printer because of the tangles other than that works just fine

Kurzfassung: ordentliches Filament, mit fairem Preis , schöne Oberfläche So jetzt der längere Text.... Gesucht war ein dunkelbraunes Filament (PLA) für den Druck von Schatztruhen und Fässern für eine Schnitzeljagd. Es sollte nicht allzu teuer sein, aber auch nicht das günstigste und unter Umständen unbrauchbarste Filament sein. Die Problematik das günstiges Filament leider oftmals Mängel hat hatte ich zu oft. Im Internet waren die Bewertungen zu ICE mehr positiv als negativ, also mal ran an den Test. Und ich wurde nicht enttäuscht. Die "Schrumpfung" bei diesem Filamnt hält sich in Grenzen, gedruckte Gewinde mussten bei mir nicht nachgearbeitet werden. Verpackung: ordentlich, starke Folie, Vakuum, Trocknungsgranulat - so wie es sein soll Handhabung, Druck, Haftung: PLA standart, Wicklung sauber Temperatur PLA Standart bei mir (Hotend 195° / Bett 60°). Haftung super (auf FR4- (Blackprint) Platte). Farbe: schönes dunkles braun, mittelkräftige Farbdeckung (4 Layer a 0,15mm braucht es bis kein Gegenlicht durchkommt) zu dem Bild: Eulen von links nach rechts: Tinmorry - kaky matt - PLA XingtongZhilian - coffee marmor - PLA Janbex - wood - HolzPLA eSun - hellbraun - PLA+ M4P - Kupfer - PLA ICE - Barbaric brown - PLA

Lo uso con un lápiz 3D y va bien para 2D, no 3D, como era de esperar, por ser PLA. Tengo la sensación de que el filamento es ligeramente más delgado que los otros, pero el lápiz lo admite sin grandes problemas. A veces hay que ayudarle un poco empujándolo hasta que el motor logra moverlo, pero como con otras marcas. El color es marrón chocolate, y queda realmente bien. La curvatura del filamento (viene en bobina) no ejerce tanta tensión sobre el lápiz como otras marcas, por lo que en este sentido es estupendo.

not recommend

⭐️⭐️⭐️⭐️⭐️ Ottimo Filamento per Stampa 3D! 🎉 Ho recentemente provato il filamento ICEFIL1PLA104 in Barbaric Brown da 1,75 mm e sono rimasto estremamente soddisfatto dei risultati! 🌟 🔍 Qualità del Filamento Questo filamento PLA è decisamente superiore rispetto ai normali filamenti PLA che ho utilizzato in passato. È più duro e meno fragile, il che significa che i miei modelli hanno una maggiore resistenza e durata. 💪 Ho notato che anche le parti più sottili delle mie stampe mantengono la loro integrità, il che è un grande vantaggio per progetti dettagliati. 🛠️ Facilità di Stampa Una delle caratteristiche che apprezzo di più è la facilità di stampa. 🚀 Ho utilizzato temperature di stampa relativamente basse, e il filamento ha aderito bene al piano di stampa senza problemi di deformazione. La bassa deformazione rende questo filamento ideale per stampe di grandi dimensioni, evitando problemi di warping che possono essere frustranti. 😅 🌱 Biodegradabile e Sostenibile Essendo biodegradabile, mi sento bene a usare questo filamento sapendo che non contribuisco all'inquinamento. 🌍 È una scelta ecologica che non sacrifica la qualità della stampa. 👃 Odore Limitato Durante la stampa, ho notato che l'odore era molto limitato, a differenza di altri filamenti che tendono a emettere odori sgradevoli. 🚫👃 Questo è un aspetto importante, specialmente se si stampa in spazi chiusi o in casa. ✅ Conclusioni In generale, il filamento ICEFIL1PLA104 è un'ottima scelta per chiunque voglia realizzare stampe 3D di alta qualità. 🎨 La combinazione di resistenza, facilità d'uso e sostenibilità lo rende un prodotto da raccomandare. Non vedo l'ora di provare altre varianti di colore! 🌈 Consiglio vivamente di provarlo se siete appassionati di stampa 3D! 💡🖨️

After wasting hakf of it I have tried same settigns with Sulu, and all magically worked. This filament doesnt stick well, despite all settigns. It doesnt even come out well from the extruder, despite all temps and settings. It doesnt matter what amount of extrusion, what speed or temps, what abbay steps..whatever. This filament doesnt come out well from a high level printer (Troodon 400). Doesnt stick to the best type of PAE mag sheet. And it is only PLA. Pla should stick even on water