Gliging30 Switch Tester Opener Acrylic Lube Station DIY Cover Removal Platform Keycaps Puller for Custom Cherry Mechanical Keyboard

With cherry switches, you can put the bottom housing on the lube station and assemble the top housing by simply pushing it in without taking the bottom housing out. The switch opener also works fine.I have Kailh silver switches. Yes, they can fit into the lube station, but you have to take out the bottom housing first to assemble the top housing, which makes the job ten times harder. Also, the switch opener doesn't work.I wish they could be clearer about what kind of switches don't fit.

USED ON GATERON SWITCHES-very good kit if youre getting into custom Keebs, as a beginner i was looking for a switch remover-tweezers with a pointed tip and paint brushes for the lube and grease- a switch opener and a cap puller. this kit had it all but not with some slight issues that can be a little annoying but tolerable if you know the work around. the switch opener was good but the switches got stuck on it Due to the switch opener having little notches that locks the switch in place, easy fix just push the little notch on the side where it gets "stuck" and its free, nothing too hard ( not many know that so they whine that the opener is bad) the worst thing about this kit would be the Holding plate for the switches, and my lord its bad, the "+" on the plastic was waaayyy to small , no way to fit them on there. not sure why they included it if they wont fit, the squares for the switches bottoms were like 1mm too small so the squeeze was a bit tight but still held them. not really an issue for me because i only used it to hold the bottoms and the other pieces like the spring and the "+" thingy in a bowl because im prone to knocking things around when moving about, im just clumsy like that. another thing was the switch puller, was decent but felt like it would bend when u pulled (could be my switches were on the keyboard good and tight) and didnt really grip the switch that good but it still did its job, if you are a beginner i would 9/10 reccomend this because of the price, switch opener alone is 15$ on amazon, this comes with everything youll need IMO. great product IF you are just getting into the hobby.

I took a risk getting this kit after seeing all the bad reviews it had but it was worth it. I can't tell if I just got a better model and the other customers were unlucky with the manufacturing or if they improved the model after all the bad reviews. To start off, most of the problems that had been mentioned in other reviews didn't hold true to what I received. The lube station didn't have a tight fit with the stems nor the bottom housings of switches, making it an overall good lubing station. A lot of people like to complain about the switch opener for being tight but after a couple of uses it gets better. One thing to mention is that the switch opener is only meant for mx style switches, so Kailh switches won't work. There are two keycap pullers that come in the package but I recommend not using the all plastic one because it can damage your keycaps. The switch puller and tweezers are both great while the brushes seem to come dirty so a little rinse will fix it. Even with there being minor problems I still can't complain with the price of all these tools. Buying these products individually would cost more than just getting this solid kid that's great for beginners.

It comes with a lot of useful accessories, but the actual lubing station itself doesn't fit most switches comfortably, and doesn't leave enough room to let you close the switches on it after lubing them. I'd recommend going with something else if you can.

This Product comes with everything you need to open any cherry style mx switch. I was very surprised to see a metal switch opener and not a cheap plastic, it is good quality but I had to pry my holy panda switches out because the opener wouldn't let the base out. I also thought that the tweezers and switch puller was a nice edition to this product and they don't feel cheap either they were very helpful in desoldering my old switches with my new ones. The only thing this kit does not come with is lube but that's ok because going to get each individual part in this kit would cost you at least $40 if you are looking for quality parts. But this thing comes with everything at only $20 definitely 5 stars.

I've had this set for a few days now and it's proved quite useful for lubing switches in larger quantities. It's great for keeping everything organized and ready to reassemble, since you can pop the switches back together after lubing them while they're still in the acrylic plate. It does have rather tight tolerances for the stems, but I suspect they will loosen up the more you use the plate. This is also true for the switch opener on the sides where the switch would pop into a mounting plate. To remedy this, I lightly filed it down and it works much better now. The manufacturer/seller may change this in the future so be sure to test before modifying anything! Overall, this is an awesome product to help get the best out of your keyboard.

Get a decent amount of stuff for your money.. the stem holder cut out is useless, the switch opener doesnt work as well as others cough kdbfans cough. Idk why it comes with 2 different key cap pullers, one is ok and the other is trash. Brush isnt anything special. With a few improvements this kit would be perfect, but cant really complain too much for the price.

So it works. Its not the best. The brushes are cheap and fray quickly. The switch opener is absolutely trash. The tweezers are fantastic. The keycap puller works as intended nothing fancy but it doesn't need to be. The station itself is great might need a bigger one but its fine for someone who doesn't plan on putting multiple keyboards together

Muy buen kit, por 440 pesos mexicanos que lo compré está excelente, solamente el switch puller ronda los 180 o 200 pesos.El switch opener es de metal y ronda los 200 a 300.Pinzas de precisión de metal otros 100 pesos. El resto ya ni para que hacer cuentas.Con este kit ya solo compra krytox o mezcla tu lubricante pa pobre :) ejemplo lim lub permatex

I don't know what kit this keyboard is for but the switch opener damaged my switch and the switch remover doesn't fit on the new keyboard I had to buy because this damaged my first one. This is being returned and I'm not happy that I ended up down a rabbit hole because of this thing. Because of a broken switch, I had to get a whole new keyboard because my keyboard was not swappable. I am tech and I solder. I ended up buying a swappable keyboard and this doesn't fit but like I said, I wouldn't have had to buy all new stuff if this thing hadn't damaged my first keyboard. New keyboards, new switches, they come with a lot of these tools so in the end I have the tools I need but the fact that things had to get damaged.... buy this at your own risk. I'm not recommending any of this to anybody who values money and doesn't want their investments ruined.

I wish I discovered this earlier as I have been lubing my switches without a lube station (which I found pretty time-consuming). All the included tools are a nice bonus, the metal switch opener is an upgrade to my 3D-printed one that i own, it's just sometimes the bottom housing sometimes gets stuck which can be annoying.

I received mine but the switch pullers, keycap pullers, and gloves were not in the package and I received a different version of the lube station.

Some of the holes in the acrylic part were not cut all the way through so they're not usable.